Register now to get rid of these ads!

rebuilding after the crash

Discussion in 'Off Topic Hot Rods & Customs' started by racer-x, Sep 19, 2015.

  1. JBurt
    Joined: Aug 2, 2009
    Posts: 221

    JBurt
    Member

    Me too? me 3? me 6? I seldom post but I do follow all 3 of your threads. This one is way above my head, but it lets me live vicariously through your exploits.
     
    chryslerfan55 likes this.
  2. This is the first time out of the shop after two weeks. It's hard to tell how it's going to really look inside the shop. I will raise it up one inch for a little more room for tire growth.
    Sunday it goes to the painter. Monday i will drop the tubs off to be powder coated. 20241122_104945.jpg 20241122_104955.jpg 20241122_105016.jpg 20241122_105022.jpg 20241122_104924.jpg 20241122_104945.jpg 20241122_104955.jpg 20241122_105016.jpg 20241122_105022.jpg 20241122_104924.jpg I took the blower off so I can service it again while the cars away. I will also put
    the spare trans together. Someone said it's the off season. I don't think I got that memo.
     
  3. 19Eddy30
    Joined: Mar 27, 2011
    Posts: 2,873

    19Eddy30
    Member
    from VA

    I like these 2 pics ,
    If me , I could not wait to do a John F
    Smoker , Then stage 1st gear pull down alleyway!

    IMG_2617.png IMG_2618.png
     
  4. Holy Cow!!! I didn't think you could make the car look any better, but you sure did! Nice job Brian & Jerry!!!!
     
  5. 19Eddy30
    Joined: Mar 27, 2011
    Posts: 2,873

    19Eddy30
    Member
    from VA

    I know , I know !!!
    Wing , 220- 235 mph o_O

    IMG_2617.png
     
  6. wrenchbender
    Joined: Sep 5, 2007
    Posts: 2,405

    wrenchbender
    Member

    Looks great Brian can’t wait to see it run
     
    427 sleeper, mad mikey and porkshop like this.
  7. I don't think I want to go 230mph in this car. We will see how it goes. Still no wing.
    The car will look much different when the paint work is done. I think it will look lower.
     
  8. The entire ignition was sent out for servicing. They found a bad wire connector that most likely was the problem. It was causing a intermittent short. They also found a cracked shaft at the key way. The bearings they said were kind of crunchy. The rotor was rebuilt as it was suspect. Everything was plugged in and tested. Its ready to go. Going like crazy here. April is coming soon. 20241120_150816.jpg 20241120_150949.jpg
     
  9. Harv
    Joined: Jan 16, 2008
    Posts: 1,266

    Harv
    Member
    from Sydney

    This photo is the definition of “purposeful”. This thing looks mean. :cool:

    Cheers,
    Harv
     
  10. How much will those tires grow ? Not sure another inch will be enough, then again, what do I know ? Will you be running solid struts or coil-overs in the rear ?
     
  11. The extra inch is in addition to the already 2.5 inches. It's hard to see in the pics.
     
    bchctybob, 427 sleeper, TFoch and 5 others like this.
  12. I know your car weighs probably 1500# more than the Tramp, but Bryan went 5.98 @ 240 without a wing. I have faith you could do it too if you felt safe doing it.

    20241122_104924.jpg

    Tramp - 5.98 @ 240.jpg
     
  13. Looks much lower in stance Brian. Well done. Very serious machine.
     
  14. Happy to see you are updating this thread. Thank you.
     
  15. Tim
    Joined: Mar 2, 2001
    Posts: 18,488

    Tim
    Member
    from KCMO

    What a monster!

    really enjoy seeing how far you go to make sure the car is serviceable in every aspect.
     
    Dick Stevens and racer-x like this.
  16. 19Eddy30
    Joined: Mar 27, 2011
    Posts: 2,873

    19Eddy30
    Member
    from VA

    Two different style vehicles ,
    In the past we have disputed this ,
    One , the seat is a center, diffrent
    Chassis Design,
    The other To much Flat surface,& off set seat ,
    Pull windshield & rear glass & other air packing ,
    Then Skating around like P/S & Mods ,
    No down Force
     
  17. Car looks killer!
     
    porkshop, fegsta and racer-x like this.
  18. The car made it to the painter. It should be done next week.
     
  19. Tim
    Joined: Mar 2, 2001
    Posts: 18,488

    Tim
    Member
    from KCMO

    While everyone is looking to the sky for Santa in a red sled he’s really on the ground in a green rocket! Looks like it should be ready for deliveries in time :)

    looking good man
     
  20. It should be done this weekend.
    The blower was shipped back to Littlefield. When I took it apart the gear lube looked like it was silver metallic slime. Something is not happy. It's going in for a full service. New strips; seals; timing reset etc.
     
  21. bchctybob
    Joined: Sep 18, 2011
    Posts: 5,595

    bchctybob
    Member

    Your body and paint guy is pretty good, knocking it out, no nonsense.
    Glad you’re still updating the thread, we found you.
     
  22. There's no fooling around. I surround myself with talented guys that get things done. We all have a common goal getting this car to Dallas in April. We have about 130 days but who's counting.
     
  23. The only way to complete a large and complicated project on time is to make a schedule, know your days, prioritize your tasks, and understand your critical path items.
     
  24. It's all about proper planning and execution. We have a plan. We are executing it. We also have the weather to deal with. Cold and snow in south east wisconsin are on the way. I will have to remove the water from the trailer as a huge cold front comes this weekend. The trailer is kept in my heated shop so normally there isn't a issue.
     
  25. Happy Thanksgiving everyone. My holiday tradition is different from most. I'm usually on emergency call on the holiday. I can't count on being around to have a big turkey dinner. So for the last 30 plus years I have a pizza and pie. No stress. No clean up. Screenshot_20241105_123348_Photos.jpg
     
  26. Tim
    Joined: Mar 2, 2001
    Posts: 18,488

    Tim
    Member
    from KCMO

    Even your pie is blazing the tires for a third of the track! Happy thanksgiving :)
     
    mad mikey and racer-x like this.
  27. Happy Thanksgiving Brian.
     
    chryslerfan55 and racer-x like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.