Projects start '27 coupe solidworks plans

Hamb hello people, my project is a'27 Ford coupe but only found parts of the body loose, I will start my project in SolidWorks, a'27 coupe with all the measures in SolidWorks, I would love if I can help with Some measures, such as to start work, when the body upload the file to the Hamb

many thank you very much
I need your help please

 

I don't have a t coupe body, but i've often wondered about reverse engineering one using lasers and point clouds and cad systems! I am interested in your work!

-90% jimmy

 

if it was only a model a, then i can hoook you up...
goodluck.

 

thats so kool man, reminds me of the "bad news" hot rod...


keep it up mang

luke

 

if we look at the first video of "bad news" I made a bournout in the brain jejeje ahi came out of the idea of building a'27 coupe, the only problem here is that in very few argetina coupes '27

 

here is what I got from my car, hope this helps you out.

 

Do have some measurements on the width of the body?

 

carbon guy I owe you, thank you very much for helping me, without these measures it is impossible to continue my project thanks
very nice'27 coupe have your

LarzBahrs thanks for your question and your help, tomorrow upload new pictures to complete steps wide and details

and pictures of my worksss

thanks guys

 

What ever you need, I will try to help.

 

I have some websites if you want to check em out, they have a bunch of frame specs and body specs just to give you an idea

http://home.cogeco.ca/~deuceguy/Model_A_Scans_Main.htm

http://www.wescottsautocom/.

 

hello guy, this is roof perimeter start measuremet

 

hi guys, my '27 coupe modified with photoshop , I have no trunk lid and part of the quarter butt.

 

hi,I have a new acquisition, a '26 sedan roof mutilated him, in Argentina there are very few of these cars, not if you leave a sedan or coupe reform, perhaps a new project.

Greetings