Been hard at the sheetmetal work on this Coupe, it's taking time but coming along, working my way from front to back
Tried to save the corner but had to replace after all from a poor previous attempt at replacing Also had to replace the lower section of the trunk area bead that had a few dents that I couldn't get out Had to make the drivers side look good too, had few pinholes so it had to come out as well
Got most of the lower sheetmetal In so it was time to keep the ball rolling with a agreed upon Chop, we decided on a mild 2.5 inch chop. Didn't know if I was gonna like the mild chop but it has grown on me and looks proper
Finished up the shifter cover and made it removable to get to the shifter since it is so tight with the 40 Crossmember [ ATTACH=full]3006517[/ATTACH]
Floor alone is a work of art, thanks for sharing, pics & tips will help many. I think it will be difficult to ever hide those floors with carpet.
Nothing like little A to get you going. Looks great Rusty .I wish my 32 was only chopped 2.5 every time I hit a bump !
Rusty, being short sometimes has it's advantages and one of 'em is to be able to chop your top drastically. I know how tall you are and I'm very surprised you didn't go with a 5-6 inch chop! But it does look good with the "short chop".... Nice.....gonana run a 389 again?
Had to roll it outside to get a different perspective Sent from my iPhone using The H.A.M.B. mobile app
Started replacing the rusted rain gutters Even worse under once removed Sent from my iPhone using The H.A.M.B. mobile app