Register now to get rid of these ads!

~~~~post your home made trophy pics~~~~

Discussion in 'The Hokey Ass Message Board' started by yetiskustoms, Apr 27, 2012.

  1. von zipper
    Joined: Nov 23, 2008
    Posts: 1,012

    von zipper
    Member

    ImageUploadedByH.A.M.B.1403660708.434046.jpg

    One that I received!


    Posted using the Full Custom H.A.M.B. App!
     
    Stogy likes this.
  2. yetiskustoms
    Joined: May 22, 2009
    Posts: 1,932

    yetiskustoms
    Member

    Here's the 2014 rose city roundup club pic I did for vintage rollers cc.

    Posted using the Full Custom H.A.M.B. App!
     

    Attached Files:

    Stogy likes this.
  3. 117harv
    Joined: Nov 12, 2009
    Posts: 6,590

    117harv
    Member

    ricks 56 f100 058 (Small).jpg ricks 56 f100 068 (Small).jpg ricks 56 f100 069 (Small).jpg ricks 56 f100 060 (Small).jpg ricks 56 f100 061 (Small).jpg ricks 56 f100 005 (Small).jpg Here are pics of a couple trophies I made for a small local show. The tapered aluminum cone is off of a roller conveyer to send items/boxes around a corner. The base is the pivot cup at the trans on a Ford torque tube. The paint gun is (circa) 60's vintage, I drew up the legs and web and had them water jetted. The balls on both are old bearings, heated to take out the hardness so they could be welded. A buddy pinstriped them.

    The best paint went to this clean Econoline pick up, the other I didn't get a pic of but it was a late 40's Plymouth coupe.
     
    Stogy likes this.
  4. yetiskustoms
    Joined: May 22, 2009
    Posts: 1,932

    yetiskustoms
    Member

    That looks kool! ^^^^
     
  5. model.A.keith
    Joined: Mar 19, 2007
    Posts: 6,282

    model.A.keith
    Member

    Here's some we did for a Breast Cancer charity car show a few weeks back, 1950's comic book art, decoupage on bowling pins,


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    K
     
    Stogy and jakespeed63 like this.
  6. Finnrodder
    Joined: Oct 18, 2009
    Posts: 2,955

    Finnrodder
    ALLIANCE MEMBER
    from Finland

    Our club organized a small car/bike show again.Looks like homemade trophies are our shows trademark.People likes them and i think its cooler to receive something unique than boring cheap-o trophy.The trophies looked like this at this year:

    [​IMG]

    [​IMG]
     
    robber grin and Stogy like this.
  7. brasshead
    Joined: Jul 17, 2008
    Posts: 41

    brasshead
    Member
    from indiana

    Here are a few I did this summer small 1.jpg small 2.jpg
     
    Stogy likes this.
  8. Here is one I did for the last Frankenmuth Auto Fest for Best Use of Pinstriping. Base is a Lexan single wine bottle holder;brush is a piece of 1/2" optical grade Lexan;and the support is a piece of 1" round Lexan dowel.Base is adorned with prismatic vinyl.
     

    Attached Files:

    Stogy likes this.
  9. saltflats
    Joined: Aug 14, 2007
    Posts: 10,100

    saltflats
    Member
    from Missouri

    Here's one I slapped together. IMAG0777.jpg
     
    Stogy, Hombre and jakespeed63 like this.
  10. brasshead
    Joined: Jul 17, 2008
    Posts: 41

    brasshead
    Member
    from indiana

    Those are all pretty cool. Here is a couple more I made for this past summer. They have not been pinstriped yet in these pictures.

    small 3.jpg small 4.jpg small 5.jpg
     
    Stogy likes this.
  11. gonmad
    Joined: May 17, 2007
    Posts: 1,753

    gonmad
    Member

    One I threw together for the Stray Kat Starliner in Wichita last month. It's not striped yet, looked better finished.



    Posted from the throne room using the Wicked kustom H.A.M.B. App!
     
  12. gonmad
    Joined: May 17, 2007
    Posts: 1,753

    gonmad
    Member

    Forgot to attach the pic with my boy. ImageUploadedByH.A.M.B.1412825278.740181.jpg


    Posted from the throne room using the Wicked kustom H.A.M.B. App!
     
    Stogy likes this.
  13. vinnymac44
    Joined: May 16, 2008
    Posts: 142

    vinnymac44
    Member
    from W. Oregon

    horn.jpg
    Just finished this for a show early next year.
     
    Stogy likes this.
  14. 2NDCHANCE
    Joined: Sep 11, 2007
    Posts: 896

    2NDCHANCE
    Member

    It's time to start making trophies again. Gary
     
    jakespeed63 likes this.
  15. 117harv
    Joined: Nov 12, 2009
    Posts: 6,590

    117harv
    Member

    I have been working part time for a local shop and was asked to make 5 additional trophies for a show hosted at the shop, here is what I came up with.

    The car parts used are, misc. parts from a 4x4 transfer case, model A starter drives, cam gear, main trans gear cluster, end of torque tube. The timing chain and two crank gears are from a 331 Hemi, tapered cone in from a conveyer, bearings are from CV joints, crowns made from tubing, the base of one is a pair of SBC engine mounts. Powder coating as well pin striping was done by local friends.

    Pics next post.
     
  16. 117harv
    Joined: Nov 12, 2009
    Posts: 6,590

    117harv
    Member

  17. Timbofor
    Joined: Dec 4, 2014
    Posts: 192

    Timbofor

    Wow Harv. Some trophy a if actualy want in my man cave. That is some dang nice work!
     
    117harv likes this.
  18. Russco
    Joined: Nov 27, 2005
    Posts: 4,131

    Russco
    Member
    from Central IL

    Rust Revival image.jpg
     
    Stogy likes this.
  19. frankieC
    Joined: Mar 2, 2009
    Posts: 217

    frankieC
    Member

    From the VOODOO KINGS

    To KOOL !!
     

    Attached Files:

    Stogy likes this.
  20. ...here's a few I made in the past for our club's pick award at the Torquefest show. farley 005.jpg farley 006.jpg torquefest 2011 trophy 001.jpg torquefest 12 trophy 010.jpg
     
    robber grin and Stogy like this.
  21. Russco
    Joined: Nov 27, 2005
    Posts: 4,131

    Russco
    Member
    from Central IL

    Sam I remember that red silhouette one from '12 that's was way cool.
     
  22. 2NDCHANCE
    Joined: Sep 11, 2007
    Posts: 896

    2NDCHANCE
    Member

    trophy-color-1.jpg tinlizzy150.jpg 2015 trophies.jpg Here are some that I made for this years (2015) season. The Terminator hand spins on a huge electric motor bearing. Kool stuff. Gary
     
    Last edited: Jul 2, 2015
    robber grin, Stogy and gonmad like this.
  23. #Wideopen
    Joined: Dec 7, 2012
    Posts: 16

    #Wideopen
    Member
    from Downunder

    ImageUploadedByH.A.M.B.1440325461.256612.jpg ImageUploadedByH.A.M.B.1440325533.689291.jpg
    Couple of cool ones I've been lucky enough to pick up with my 61 f100 uni
     
    Stogy likes this.
  24. yetiskustoms
    Joined: May 22, 2009
    Posts: 1,932

    yetiskustoms
    Member

  25. BrandonB
    Joined: Feb 24, 2006
    Posts: 3,105

    BrandonB
    ALLIANCE MEMBER
    from nor cal

    Both are club picks for my 34. The one on the left is from Sacramento 2012 autorama from Mala Famalia and the one on the right is a Poor Boys club pick at a local show.

    DSC00742.JPG
     
    Stogy likes this.
  26. JACK30
    Joined: Dec 24, 2007
    Posts: 97

    JACK30
    Member
    from PA.

    just finished these up last night all lettered and done 3 more to make for the GASKET GOONS HOT ROD BASH SEPT 10th 2943 RT 212 SPRINGTOWN PA 18081 100_7977.jpg 100_7984.jpg 100_7985.jpg 100_7990.jpg 100_7954.jpg 100_7964.jpg 100_7969.jpg 100_7965.jpg 100_7971.jpg 100_7975.jpg 100_7973.jpg
     
  27. JACK30
    Joined: Dec 24, 2007
    Posts: 97

    JACK30
    Member
    from PA.

    11untitled.png 9untitled.png ANOTHER TROPHY DONE FOR THE GASKET GOON HOT ROD BASH 2016 SEPT 10th SPRINGTOWN PA 18081
     
    Last edited: Jan 30, 2017
    robber grin likes this.
  28. yetiskustoms
    Joined: May 22, 2009
    Posts: 1,932

    yetiskustoms
    Member

  29. gonmad
    Joined: May 17, 2007
    Posts: 1,753

    gonmad
    Member

    IMG_2303.JPG Another for the SK 500.
     
    Stogy likes this.
  30. 1low52
    Joined: Oct 26, 2007
    Posts: 286

    1low52
    Member

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.