Register now to get rid of these ads!

pinstriper in KC

Discussion in 'The Hokey Ass Message Board' started by Doc., Oct 19, 2006.

  1. Doc.
    Joined: Jul 16, 2005
    Posts: 3,558

    Doc.
    Member Emeritus

    Hey Guys,

    Who's the go to guy to lay down some lines in the K.C. area?

    Doc.
     
  2. warbozz
    Joined: May 29, 2005
    Posts: 720

    warbozz
    Member

    Kcsledz here on the HAMB does it as one of his many talents.
     
  3. Bob Bond is in near by Lee's Summit.
     
  4. Mootz
    Joined: Jul 20, 2004
    Posts: 945

    Mootz
    Member

    "Knuckle" here on the HAMB can lay some sweet lines, best I've seen in a while.

    Mootz
     

  5. Ryan
    Joined: Jan 2, 1995
    Posts: 19,935

    Ryan
    ADMINISTRATOR
    Staff Member

    Kevin Lee is one of the best stripers I've ever been around... but good luck talking him into it - I think he's retired!
     
  6. Sprout
    Joined: Mar 26, 2001
    Posts: 743

    Sprout
    Member

    Blaine Scott is up there.
     
  7. sodbuster
    Joined: Oct 15, 2001
    Posts: 4,976

    sodbuster
    Member
    from Kansas

    I thought there was a guy named Grimlok that pulled lines also......

     
  8. Doc.
    Joined: Jul 16, 2005
    Posts: 3,558

    Doc.
    Member Emeritus

    Thanks guys, now if I can just talk Kevin Lee out of retirement I'm golden.HAHA. I'm gonna be flying into KC the 3rd of November and I'm gonna need some bitchin' lines layed on my sedan.

    Doc.
     
  9. hotrodladycrusr
    Joined: Sep 20, 2002
    Posts: 20,763

    hotrodladycrusr
    Member

    So your sedan is being built in KC and is almost done???
    How exciting.:cool: How about some updated photos??
     
  10. Kevin Lee
    Joined: Nov 12, 2001
    Posts: 7,442

    Kevin Lee
    Super Moderator
    Staff Member

    Ummm... is that Uncommon Engineering Flathead part of the build? If so, keep talking. :)

    And um, wow. Thanks for the good words.
     
  11. There's a kid who goes by Von Mex who's pretty impressive. (913)334-0401
     
  12. Doc.
    Joined: Jul 16, 2005
    Posts: 3,558

    Doc.
    Member Emeritus

    They will be forthcoming soon ladyD. I hope to get lots of pics when I make the trip up there.
     
  13. Doc.
    Joined: Jul 16, 2005
    Posts: 3,558

    Doc.
    Member Emeritus


    Kev, That blown,injected, flatty is the heart and soul of this car. I've spent three years plotting to gather all of the unique parts for it It will be . It will be a wild ride for sure,

    Do
     
  14. KCsledz
    Joined: Jun 19, 2003
    Posts: 2,333

    KCsledz
    Member

    I am a bit out of practice! I would recommend Kevin Lee or Bob Bond. If I remember correctly Bob did the stripes on The Hollywood Cross Speed Shop coupe.
     
  15. HotRodKitten
    Joined: Sep 27, 2006
    Posts: 71

    HotRodKitten
    Member

    You should make the drive to Wichita to get it done right. Check out Jeb McGregor (shameless promotion;))
     
  16. raven
    Joined: Aug 19, 2002
    Posts: 4,637

    raven
    Member

    Hey Kerry,
    Are you talking about Bob Sanchez's son?
    If so, he's awesome indeed!
    r
     
  17. Kevin Lee
    Joined: Nov 12, 2001
    Posts: 7,442

    Kevin Lee
    Super Moderator
    Staff Member

    I defer to Bob Bond. Great guy, insanely good craftsman. Line consistency, symetry, everything that makes you look at a piece and say, "Wow, that's professional work."

    And it sounds like your car deserves nothing less.
     
  18. Yep. He put a few stripes on the panel over my gas tank. What is he, 12 or 13?
     
  19. raven
    Joined: Aug 19, 2002
    Posts: 4,637

    raven
    Member

    Guys, the 'kid' that Kerry is referring too is truely unbeliveable.
    Way over the top.
    r
     
  20. finkd
    Joined: Mar 3, 2001
    Posts: 1,500

    finkd
    Alliance Vendor

    Blaine Scott Is The Way To Go. Very Good And Really Bitchin Designs.
     
  21. I think he said he'd been striping since he was 5.
     
  22. 53sled
    Joined: Jul 5, 2005
    Posts: 5,818

    53sled
    Member
    from KCMO

    Met him at Raven's shindig last fall. Amazing talent, I want him to hook up my heap, now that it is in Rustoleum glory.
     
  23. Okie Pete
    Joined: Oct 29, 2008
    Posts: 3,601

    Okie Pete
    ALLIANCE MEMBER

    Blaine Scott laid down some very nice lines on my bell helment.Nice curves and very sametrical.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.