Register now to get rid of these ads!

Pic request....Rare SBC speed equipment.

Discussion in 'The Hokey Ass Message Board' started by SinisterCustom, Aug 29, 2008.

  1. 1971BB427
    Joined: Mar 6, 2010
    Posts: 5,686

    1971BB427
    Member
    from Oregon

    Very cool, and amazing someone purchased it and never got opened after all these years! Any Weiand stuff with "Say-Why-And" on it is vintage. I'm running an early "Say-Why-And" cross ram on my gasser.
    [​IMG]
     
  2. 34andy
    Joined: Mar 21, 2007
    Posts: 123

    34andy
    Member
    from WA

    This is an early cast small journal main girdle. I've never seen another exactly like it. Anyone recognize it?
     

    Attached Files:

    mgtstumpy and volvobrynk like this.
  3.  
  4. Thats why they belong on Gassers not street rod !!!!!!!!
     
  5. longstory1948gmc
    Joined: Apr 23, 2014
    Posts: 111

    longstory1948gmc
    Member
    from n Illinois

    this is rare enough right?? a prototype moon cross ram no holes drilled for a sbc image.jpg
     
    volvobrynk and enloe like this.
  6. enloe
    Joined: May 10, 2006
    Posts: 8,525

    enloe
    Member
    from east , tn.

    Man that will be hard to mount:)
     
    greasemonkey54 and volvobrynk like this.
  7. JimSibley
    Joined: Jan 21, 2004
    Posts: 3,197

    JimSibley
    Member

    4/71 blower setup. Cragar street kit. ImageUploadedByH.A.M.B.1415645969.999686.jpg


    Posted using the Full Custom H.A.M.B. App!
     
  8.  
  9. Mnhotrodbuilder
    Joined: Jul 12, 2010
    Posts: 1,142

    Mnhotrodbuilder
    Member
    from Afton, MN

    You guys have some really cool SBC stuff! Here is my Mcgurk 6x2. I have this 4-71 intake and any info would be appreciated about who J&C Eng is. Thanks

    SBC 471 intake 4 rotated.jpg
    11328966_10204751509722719_1531771477_n.jpg
    SBC 471 intake crop.jpg
    IMG_5107.jpg
     
    enloe and Max Gearhead like this.
  10. DDDenny
    Joined: Feb 6, 2015
    Posts: 13,443

    DDDenny
    Member
    from oregon

    Yep, using that same one on my roadster engine, McFarland claims tons of torque.
    Rodeck  006.jpg
     
  11. R Roach
    Joined: Mar 12, 2012
    Posts: 7

    R Roach
    Member

    A few months ago I was glancing at ebay and came across a intake to mount 2 x twin choke down draught webers in inline for a SBC. I have seen plenty of side draught and down draught manifolds to mount 4 carbs but this was a first for me to mount only 2. Any one else know of this manifold?
     
    volvobrynk likes this.
  12. Never seen one but it gives me an idea.
    Anyone got one of these floating around?
    upload_2015-6-5_10-0-31.jpeg

    I foud this on a google search I guess someone else had the same idea.

    upload_2015-6-5_10-0-3.jpeg
     
    volvobrynk likes this.
  13. thunderplex
    Joined: Nov 27, 2007
    Posts: 1,180

    thunderplex
    Member

    That is an Autolite in line 4bbl. Ford ran those in NASCAR in the 70s.
     
    volvobrynk likes this.
  14. Yep I know the inline webbers reminded me. They were available for street use, I don't know if they were an option on the BB or you had to order separately from Ford Motorsports. Anyone I have ever talked to says that they were a crap carb for street use but if I had one I would have to try.
    What better engine to try one on then an SBC maybe all that made them a crap carb was what was under them. ;)
     
    leadfootloon, volvobrynk and enloe like this.
  15. thunderplex
    Joined: Nov 27, 2007
    Posts: 1,180

    thunderplex
    Member

    The only intake I've ever seen for the Autolite inline 4bbl is a 427 fe intake. I came close to buying the entire setup for my 56 mainline with a 406. The seller talked me out of it for street use, but the cool factor is off the chart. Joe Buenetic in St. Louis was the seller and had several of them.
     
  16. The intake I posed is an SBC intake, but I haven't seen it either just the pic. ;)

    Never the less if someone sends me an inline autolite I'll make one and it will be rare. :D
     
  17. GearheadsQCE
    Joined: Mar 23, 2011
    Posts: 2,473

    GearheadsQCE
    Member

    Finally had my camera out when this resurfaced.

    100_4964.JPG

    There is a flat plate with slots in it to allow timing of something. (Injection Pump?) I was going to use it to drive a distributor but that plan has changed. BTW it is too deep to run a short water pump without spacers. I would imagine it was meant for a no pump application.
     
    fast30coupe and patmanta like this.
  18. Nekronomicon
    Joined: May 23, 2005
    Posts: 814

    Nekronomicon
    Member

    A few bits I've collected for my SBC
     

    Attached Files:

    1934x1934, Luke W, enloe and 2 others like this.
  19. mgtstumpy
    Joined: Jul 20, 2006
    Posts: 8,056

    mgtstumpy
    Member

    Saw one on a blown SBC in a 33 Ford here years ago
     
  20. Nice collection!!
     
  21. drtrcrV-8
    Joined: Jan 6, 2013
    Posts: 1,260

    drtrcrV-8
    Member

    GearheadsQCE: I believe your pictured front cover to be a 'race-only' piece that would use a Lehman type crank-drive water pump, while the large upper flange would give better support for cam-drive dry sump pump system. needs final machine work & mounting holes drilled. Hope this helps.
     
  22. lockwoodkustoms
    Joined: Dec 22, 2005
    Posts: 3,910

    lockwoodkustoms
    Member

    Just picked this up at Hershey it is a brass very nicely done U-Fab style 4x2 set up for a SBC I am trying to find any info on it. We believe it is a Marine application
    upload_2016-10-9_6-16-2.png
    upload_2016-10-9_6-16-22.png
    upload_2016-10-9_6-17-0.png
     
  23. GearheadsQCE
    Joined: Mar 23, 2011
    Posts: 2,473

    GearheadsQCE
    Member

    Very cool, polish that thing up and post it, PLEASE!
     
  24. Hammer76
    Joined: Feb 7, 2010
    Posts: 30

    Hammer76
    Member
    from MILANO

  25. Deuces
    Joined: Nov 3, 2009
    Posts: 18,545

    Deuces
    Member
    from Michigan

    Cross Boss intake setup for the Boss 302 ponies... Read a story once that a bunch of those got ripped off a train.... :(
    The story is on the net.... Somewhere... Do a search.;)
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.