Register now to get rid of these ads!

Technical pedal assy. ID, please

Discussion in 'Traditional Hot Rods' started by danhen, Dec 2, 2022.

  1. danhen
    Joined: Sep 28, 2016
    Posts: 18

    danhen

    A 2022-12-02 14.00.35.jpg A 2022-12-02 14.00.21.jpg Any help identifying these would be appreciated, thanks
     
  2. alchemy
    Joined: Sep 27, 2002
    Posts: 21,636

    alchemy
    Member

    Any numbers on the pedals? Looks like a big truck Ford circa 1932.
     
  3. rusty valley
    Joined: Oct 25, 2014
    Posts: 3,963

    rusty valley
    Member

    That similar type of mount was used on the ford big trucks for quite a few years I think, Like Alchemy says, a number would sort it out
     
  4. danhen
    Joined: Sep 28, 2016
    Posts: 18

    danhen

    this help?
     

    Attached Files:

  5. danhen
    Joined: Sep 28, 2016
    Posts: 18

    danhen

  6. danhen
    Joined: Sep 28, 2016
    Posts: 18

    danhen

    i also have these which I was told are 32-34 big truck
     
  7. sloppy jalopies
    Joined: Jun 29, 2015
    Posts: 5,256

    sloppy jalopies
    Member

    brake pedal pulls... mechanical brakes... pre 1939...
    part # starts with 81... memory says that is 1938...
     
    rusty valley likes this.
  8. 81A prefix indicates '38 car, but '38 car and pickup pedals are same as '37, so the pedals would have a 78- prefix. The '39 car and pickup pedals should have a 91A prefix. '39 big truck would have a 91T prefix.
     
    dirt t likes this.
  9. alchemy
    Joined: Sep 27, 2002
    Posts: 21,636

    alchemy
    Member

    There you go, 1938 big truck. I knew it was before the hydraulics started, otherwise the brake master cylinder actuator arm would have pointed down.
     
    oliver westlund and RICH B like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.