Register now to get rid of these ads!

Pay it foward = free parts for HAMB members

Discussion in 'The Hokey Ass Message Board' started by axeman39, Mar 18, 2008.

  1. POLYFRIED 35
    Joined: Sep 1, 2010
    Posts: 888

    POLYFRIED 35
    Member

    I'll get involved.

    I have a 55 Plymouth 259 pressure plate and clutch (original usable condition) with a new but slightly dented throw out bearing ... you pay shipping.

    [​IMG]
    [​IMG]
    [​IMG]






    Could use a 35 Ford truck driver side windshield garnish molding, same truck - DS window regulator, and a 3x2 set up for Plymouth 259 poly:D:eek:

    EDIT: This is just a wish list .. the above is free, you do not need to have anything for me to get the clutch parts. #payitforward
     
    Last edited: Feb 15, 2012
  2. TexasSpeed
    Joined: Nov 2, 2009
    Posts: 4,617

    TexasSpeed
    Member

    Got a spare deuce 3W body sitting around? :D


    iPhone - TJJ app
     
  3. 117harv
    Joined: Nov 12, 2009
    Posts: 6,590

    117harv
    Member

    :eek:....what's a SPARE deuce look like:confused::)
     
  4. 56 Frame Dragger
    Joined: Jan 4, 2011
    Posts: 1,212

    56 Frame Dragger
    Member

    Here is what I'm looking for if anyone has these reflectors
     

    Attached Files:

  5. flypa38
    Joined: May 3, 2005
    Posts: 529

    flypa38
    Member

    I could use a few things, all 55-56 Pontiac:
    Battery to fender brackets
    Steering wheel horn ring
    Driver's side front window glass (4dr sedan)

    I can offer up:
    Rear flat glass (tailgate) for '56 Buick Special wagon (hope I still have it!)
    Tailgate interior stainless for '56 Buick Special
    GM alternator for alternator conversion
    Rear fender for '72 Triumph 650 motorcycle ( hope OT is Ok )
    Mid-50's GM vacuum wiper motors
    Johnny
     
  6. damagedduck
    Joined: Jun 16, 2011
    Posts: 2,342

    damagedduck
    Member
    from Greeley Co

    what cha got for tail lights :D???
     
  7. Any useable hairpin radius rods out there? I have an unsplit wishbone and front axle (36 truck) I dont want to use, I would rather have more adjustments with the hairpins.

    Im also looking for a set of narrow 16 inch 5 on 4.5" internal clip hubcap wheels that can accept tubeless tires.

    Anyone need International parts- I have way more than I can list!
    Thanks!
     

  8. I could use the brake system off of a '33-'36 Chevrolet Master (6 lug) :D!
     
  9. 28 chevy
    Joined: Mar 5, 2006
    Posts: 512

    28 chevy
    Member
    from NE Pa

    When I finish the '28 I will post some stuff.
     
  10. looking for 2 chrome steelies 15 x 7 5 on 5 1/2 ford model a
     
  11. fastcar1953
    Joined: Oct 23, 2009
    Posts: 2,126

    fastcar1953
    Member

    carbs are spoken for. thanks voh. still looking for center bar for 53 chevy car
     
  12. Malibob
    Joined: Feb 23, 2009
    Posts: 503

    Malibob
    Member
    from Pittsburgh

    I need '61 Bel Air Trim for 2 door- doors and quarters.
     
  13. chrisbob12
    Joined: Oct 18, 2007
    Posts: 311

    chrisbob12
    Member

    Here is what I need. 1946/48 Ford Hood Hook

    I will post other items I have for free.
    Bob,
     

    Attached Files:

  14. chrisbob12
    Joined: Oct 18, 2007
    Posts: 311

    chrisbob12
    Member

    Here is what I have for free. Should be 3 parts. If not they 2 Chevy balancers for 265/ 283/ 327. If interested semd me a PM to bobevapenn@att.net

    Bob,
     

    Attached Files:

  15. I'm in need of a '49 to '51 Lincoln left hand head light surround.
    Anyone?

    If anyone wants old New Zealand Hot Rod mags let me know.
    You just pay shipping and I'll supply the mag free.
     
  16. mastergun1980
    Joined: Oct 18, 2010
    Posts: 1,095

    mastergun1980
    Member
    from Alva OK

    I have the rear axle out of a 1950 f-1 - If you need it come get it.
     
  17. atch
    Joined: Sep 3, 2002
    Posts: 4,441

    atch
    Member

    slightly side-stepping for just a moment: when i replaced the f-1 rear in clarence with an 8" ford someone wanted the old rear. i don't remember exactly what parts he wanted, but it seems like it was the axles & brakes to use in a banjo rear. anyone having any info on that adaptation deal please start a tech thread about it. that might be something that would be of interest to several folks.

    now back to your regularly scheduled programming...
     
  18. ok recieved 2 wheel cylinders from 48fordnut
    offering up a complete 36 ford front suspension-wide 5 drums,spring and unsplit bones -pick up only in hatboro-pm me
     
    Last edited: Feb 24, 2012
  19. 48fordnut
    Joined: Nov 4, 2005
    Posts: 3,710

    48fordnut
    ALLIANCE MEMBER

    HRS, glad you got the parts.
     
  20. 1939 plymouth p8 inner fenders and heater box, back seat (upholstery is shot)
    1940 ford gas tank, been modified with a newer ? gas gauge float and sensor.
    1950 ford camshaft.
    1974 gmc jimmy manual steering gear box

    wouldnt mind finding some decklid hinges for my 39 plym, bad condition or not.

    Located in tacoma washington, pm if ya want them.
     
  21. I got a freebie Lincoln coupe door top off hvychvy.
    Thanks a million man.
     
  22. I got a kick ass door handle and rear view mirror from Scott,Thanks dude you rock///
    I have 2 f1 door handles (outside) and an82 chevy 4 speed trans..
    thanks guys
     
  23. Lobucrod
    Joined: Mar 22, 2006
    Posts: 4,118

    Lobucrod
    Alliance Vendor
    from Texas

    I got something that I have been taking to swap meet for so long that I am afraid that the box is going to disentegrate. NOS Grant standard piston rings for a 352 FE. Free to anyone that wants them and I'll even pay the freight to the US. If nothing else its a cool looking box.
     
  24.  
  25. Gasser1961
    Joined: Nov 25, 2008
    Posts: 1,104

    Gasser1961
    BANNED

    Free to good home. I have a 5 gal floor mounted plastic fuel cell (Jaz type). Just send $15 for shipping any where in the USA.
     
  26. Gromit
    Joined: Oct 13, 2011
    Posts: 726

    Gromit
    Member

    Just a thought...
    When i was active on a classic Mini site, we had a box of goodies that travelled from member to member. You could remove any item you wanted but had to replace it with a good usable part. I got some extremely cool stuff this way and passed along some of my overstocked parts. I know this may be harder on a group where so many different types of car are represented, but does anyone see an angle here?
     
  27. PM sent on the fuel cell.

    OJ
     
  28. fastcar1953
    Joined: Oct 23, 2009
    Posts: 2,126

    fastcar1953
    Member

    any one need a 53 chevy car bellhousing? 216 or 235 should fit many years.early style bolt pattern. small center hole.
     
    Last edited: Mar 14, 2012
  29. 2manyprojects
    Joined: Jun 5, 2008
    Posts: 201

    2manyprojects
    Member

    I just might be able to hook you up not show but good cond PM me
     
  30. macs67
    Joined: Apr 21, 2010
    Posts: 76

    macs67
    Member
    from oregon

    the 74 chevy book is pretty musty smelling but still a great garage book. u pay the freight ill ship it & please send back whatever the freight was. may take a few days to get to the post office.
    both small block chevy books are exactly the same.

    to enlarge photo left click on it then left click again to enlarge it

    can use interior door opening handles for 40 ford p/u used would be great
     

    Attached Files:

    Last edited: Mar 14, 2012

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.