Register now to get rid of these ads!

Oz hambster

Discussion in 'HA/GR' started by FULLY SIX RACING, Sep 22, 2009.

  1. FULLY SIX RACING
    competed at the weekend at the 6 Cylinder nationals at WARWICK QUEENSLAND AUSTRALIA

    this top 1/8 mile track played host to the 2nd annual 6 cylinder nationals

    after a weekend of racing (15 runs) my best times where)

    1/8th mile 9.1 sec @ 76.30 MPH 60 foot 2.0 sec

    still some tuning issues (one would think after 15 runs) i would have it tuned
    1st photo shows over 100 years of drag racing experience between all the guys in the photo

    2nd picture HAMBster 1 Slingshot dragster NIL
    3rd picture waiting for run number 13 in 31 degree heat

    Now Australias fastest SLANT 6 Powered HA/GR
    14.4 sec 1/4 mile + 9.1 sec 1/8 mile
     

    Attached Files:

  2. flatty slapper 67
    Joined: Nov 10, 2008
    Posts: 25

    flatty slapper 67
    Member

    [​IMG]Ring matt at SU-Midal -Sydney-He sorted our stuff-see steves u tube
    that blue flame absolutely flyes now.
    Ring me at home for the number if you lost it.
    :):):)Great effort by you mid northcoast hamsters -Congrats all round.
    Before i forget how did kev go-the Hambstirrer?
    We will be at the next full throttle friday at Sydney with Al drving the blue flame.:):):)
    See you soon we hope.JD.:)
     
  3. 64 DODGE 440
    Joined: Sep 2, 2006
    Posts: 4,350

    64 DODGE 440
    ALLIANCE MEMBER
    from so cal

    FAR OUT!! Love the look of your car FULLY SIX, the body, roll cage and stance give the whole package a great look.

    What body are you running? The windscreen is beautiful.
     
  4. the cowl is a steel '27 dodge ? with fabricated frame and 1/32 aluminum sheet riveted to the frame.

    the windscreen is 1 piece of 1/4 aluminum sheet hand cut with very thin type of plexiglass

    front end is a '39 dodge front axle with a small parabolic 2 leaf spring
    but to get the front in the air,and give it the stance the chassis has a 8" kick up at the rear

    more pictures of the build up "go to My album"

    thanks for the kind words
     

  5. teda265
    Joined: May 15, 2008
    Posts: 10

    teda265
    Member

    HI FULLY SIX RACING
    What a great track Warwick has , I had a great two day's of racing with you guy's .
    I could only manage a best run of 10.19 (1/8) but as you can see in the link below, that when I raced you my old smoky stock slant 6 motor is well overdue for a complete rebuild.
    http://www.youtube.com/watch?v=PuMHrRDpDcg&feature=channel_page
     
  6. 64 DODGE 440
    Joined: Sep 2, 2006
    Posts: 4,350

    64 DODGE 440
    ALLIANCE MEMBER
    from so cal

    Cool collection of vintage Mopar!!
     
  7. great footage of a a great weekend ted
    love the car in the left lane "its Fully Six"
     
  8. OBFB HA/GR
    Joined: Jun 2, 2008
    Posts: 455

    OBFB HA/GR
    Member

    Good to see you got your clutch dramas fixed Ted. Well done mate.
     
  9. HAMBstirrer
    Joined: Jul 8, 2008
    Posts: 45

    HAMBstirrer
    Member
    from Kempsey

    Looks like all the Australian sites are dead? Well we all done well in the Six Banger Nationals. One win for Ted, 1 for me & 1 win and a staging foul for Peter. Those sling shot boys are just too good for us HA/GR's.
     
  10. spanners
    Joined: Feb 24, 2009
    Posts: 1,536

    spanners
    Member

    Sounds like as usual , the Australian casual way is the coolest way. I'd better get the grinder going.
     
  11. hey spanners

    post some pics of your rides :)
     
  12. spanners
    Joined: Feb 24, 2009
    Posts: 1,536

    spanners
    Member

    At the moment it consists of two lenghts of RHS , a ported grey motor, a set of Tasman mags and a burning desire to go drag racing after 52 years. And what's worse my wife says get a wriggle on.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.