Register now to get rid of these ads!

Technical On the Car Mag Wheel Polisher and other Stuff

Discussion in 'The Hokey Ass Message Board' started by blowby, Jul 3, 2020.

  1. blowby
    Joined: Dec 27, 2012
    Posts: 6,593

    blowby
    Member
    from Nicasio Ca

    I'm still wading through a bunch of free stuff. The burnisher/tumble guy gave me this king size dremmel. Gonna try it on my wheels.
    IMG_20200702_163537.jpg

    From the solder guy I got these valve guide seat grinder guides, is that what they are? Seems like a lot of sizes for valve guides.

    IMG_20200703_110525[1].jpg

    What's this for?
    IMG_20200703_111004[1].jpg

    Got a small Atlas lathe with a bunch of tooling. What is this gizmo?

    IMG_20200703_111130[1].jpg

    Are these 'Engine Analyzers" good for anything beyond dwell or charging? Says something about cylinder balance.

    IMG_20200628_185458[1].jpg
     
    chevy57dude likes this.
  2. blowby
    Joined: Dec 27, 2012
    Posts: 6,593

    blowby
    Member
    from Nicasio Ca

    Here's the pastrami on rye I had for lunch


    IMG_20200702_135435[1].jpg
     
    Last edited: Jul 3, 2020
  3. Stan Back
    Joined: Mar 9, 2007
    Posts: 700

    Stan Back
    Member
    from California

    What's that on the bottom of your shoe?
     
  4. King ford
    Joined: Mar 18, 2013
    Posts: 1,346

    King ford
    ALLIANCE MEMBER
    from 08302

    That one thing is for a Dodge.....and that thing on the lathe will definitely buff out!
     
    anothercarguy and VANDENPLAS like this.
    Register now to get rid of these ads!

  5. VANDENPLAS
    Joined: Dec 14, 2009
    Posts: 2,372

    VANDENPLAS
    Member

    E6303C93-4876-49B7-9C71-DA36C275F3FF.jpeg That Dremel tool is kick ass !!


    Are the collets maybe from a black and decker valve grinder? I have 2 buried under my work bench and haven’t used in years but remember 2 drawers full of collets? I dunno maybe?


    That press thingy is a specialized holding fixture, not sure original use, but I’m sure can be adapted to open beer bottles in pinch.

    the lathe tool holder was used by dodge to make the left hand air filter hinges on 42 dodge inline V8’s

    the engine diagnostic doohickeys are cool, basically a multimeter with a few other options. See you f you can down load the manuals.

    and here is my sammich from lunch
     
    blowby, warhorseracing and 41rodderz like this.
  6. blowby
    Joined: Dec 27, 2012
    Posts: 6,593

    blowby
    Member
    from Nicasio Ca

    Thanks VP. What's that red thing next to your sandwich? A vegetable? I've heard of those. Looks good.
     
    VANDENPLAS likes this.
  7. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,708

    41rodderz
    Member
    from Oregon

    :p They are getting a little wrinkled. Better hurry up and share.
     
    VANDENPLAS likes this.
  8. That press thing looks sorta like the clamp I have for a Dewalt mitersaw, the round horizontal ( in pic) peg probably goes in a hole in some sorta flat surface in a machine that you could clamp something to for cutting or something.
     
    blowby and VANDENPLAS like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.