Register now to get rid of these ads!

Hot Rods Olds rocket water crossovers back from the foundry

Discussion in 'The Hokey Ass Message Board' started by MARTINSPEED, Jul 16, 2015.

  1. MARTINSPEED
    Joined: Nov 18, 2007
    Posts: 294

    MARTINSPEED
    Member

    Well, I haven't made a post for quite sometime figured I'd post my first few casting of the olds rocket water crossovers I'll be selling. Off to the machine shop to confirm everything is correct before doing a run at the foundry. I'll be selling the 1949-56 303 324 version and also the 1957-58 371 version. Hopefully the 1959-64 394 soon. I'll also be casting some olds valve covers hopefully soon as well! ImageUploadedByH.A.M.B.1437101642.767818.jpg
     
  2. Dago 88
    Joined: Mar 4, 2006
    Posts: 1,930

    Dago 88
    ALLIANCE MEMBER

    Cool, you can put me down for one. Any idea of price yet ?
     
  3. very slick! Like to see those covers too.
     
  4. poprivit
    Joined: Jun 27, 2010
    Posts: 77

    poprivit
    Member
    from Hagerstown

    Put me down for two for a 303 ,they look very nice.
     

  5. MARTINSPEED
    Joined: Nov 18, 2007
    Posts: 294

    MARTINSPEED
    Member

    No price as of yet. I'll have a better idea after I get a concrete price from the machine shop. Love doing this stuff!
     
    dana barlow likes this.
  6. jjjmm56
    Joined: Feb 7, 2009
    Posts: 458

    jjjmm56
    Member
    from FL.

    I'm bulding my first 303 but not sure were they go, Is this in place of the block off plates ? What are the advantages?
     
  7. belair
    Joined: Jul 10, 2006
    Posts: 8,530

    belair
    Member

    Good for you. They look great. This should rescue a few old manifolds from hanging on the wall.
     
  8. MARTINSPEED
    Joined: Nov 18, 2007
    Posts: 294

    MARTINSPEED
    Member

    This is the often lost or misplaced thermostat crossover used withe 6 carb log manifolds. Good luck with the 303!
     
    dana barlow likes this.
  9. papajohn
    Joined: Nov 2, 2006
    Posts: 863

    papajohn
    Member

    I am most interested in one for the 394 !
     
  10. MARTINSPEED
    Joined: Nov 18, 2007
    Posts: 294

    MARTINSPEED
    Member

    I do believe the 394 crossover seems to be the most "elusive" haha I'm working on it I'll let you guys know when it's ready
     
  11. hellerlj
    Joined: Oct 12, 2005
    Posts: 1,032

    hellerlj
    Member
    from Minnesota

    Are these still for sale ???? And if so...what is the price today ????
     
  12. I have yet to see a listing for these. Been watching and waiting myself.
     
  13. unclescooby
    Joined: Jul 5, 2004
    Posts: 4,940

    unclescooby
    Member
    from indy

    I have original 394 Offy 6x2 with carbs and air cleaners and an offy water crossover for the 59-64 rockets for sale for $800 if you need them to make patterns or something


    Wanted! Olds 394 Hurst motor mount and dual point distributor
     
    kidcampbell71 likes this.
  14. tubman
    Joined: May 16, 2007
    Posts: 5,205

    tubman
    ALLIANCE MEMBER

    Hmmmm.. It says he was on here yesterday. I don't think he would drop something like this when he was as far along as he seemed to be. "hellerlj", I think you should start a "Conversation" with him if you are interested in these. Or, you could "Like" his original post; that might get his attention.
     
  15. hellerlj
    Joined: Oct 12, 2005
    Posts: 1,032

    hellerlj
    Member
    from Minnesota

    DAMN THAT'S CHEEEEP !!!!!!!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.