Register now to get rid of these ads!

New Header Flanges

Discussion in 'The Hokey Ass Message Board' started by HotRodChassis, Mar 28, 2007.

  1. Jalopy Banger
    Joined: Aug 5, 2002
    Posts: 376

    Jalopy Banger
    Member
    from Sweden

    I could use a set too!
     
  2. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    Ok, that's two. I'll get them made up.
     
  3. triton6972
    Joined: Apr 3, 2006
    Posts: 174

    triton6972
    Member

    Yes I would be interested in a set. If you want you can pm me.

    Thanks
     
  4. triton6972
    Joined: Apr 3, 2006
    Posts: 174

    triton6972
    Member

    Yes I would be interested in a set. If you want you can pm me.

    Thanks
    Eric
     
  5. InDaShop
    Joined: Aug 15, 2004
    Posts: 2,785

    InDaShop
    Member
    from Houston

    I'm still waiting to hear if you'll sell a handful of mild steel stubs. I'd buy a dozen or so. I know you said $20 welded on, so say $10 not welded on per half dozen?
     
  6. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    394 Rockets are in, also late 371, but no photograph

    [​IMG]
     
  7. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    364, 401, 425 Buick Nailhead

    [​IMG]
     
  8. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    425, 472, 500 Cadillac
    [​IMG]

    Four bangers are on the way. Probably next Monday or Tuesday
     
  9. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    200 CID Four Banger:

    [​IMG]
     
  10. LIMEY
    Joined: Nov 5, 2002
    Posts: 1,986

    LIMEY
    Member

    Do you have Ford flathead V8 in stock & would you ship to the UK?

    If so what would the total cost be with 3 - 5 day shipping, thanks.

    Kev.
     
  11. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    For 2" exhaust and Fenton Headers $20.00 pr.

    [​IMG]
     
  12. FrankBoss
    Joined: Jun 29, 2007
    Posts: 128

    FrankBoss
    Member

    how about the 200 Ford six?

    Frank
     
  13. 59NASH
    Joined: Feb 11, 2003
    Posts: 73

    59NASH
    Member

    How about the Buick I8. I would be in for two sets for the mid size 263. Would the intake and exhaust be separate or one piece. I would prefer if it was one piece.

    Thanks
    Jonathan
     
  14. Gr8ballsofir
    Joined: Apr 21, 2001
    Posts: 768

    Gr8ballsofir
    Member

    I would prefer seperate, Each port. This would make later repairs easier.
     
  15. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    We can make them both ways more than likely. Let me get some gaskets and we'll see if we can set you guys up.
     
  16. diego64
    Joined: Feb 13, 2007
    Posts: 28

    diego64
    Member
    from oceanside

    one more for the 263 buick I8.
     
  17. 53 special
    Joined: Mar 4, 2007
    Posts: 18

    53 special
    Member

    I would also be intrested in the buick I8
     
  18. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    I'll need one of you Buick I8 guys to volunteer to have me mail you a test pattern before we do the real flanges. Pm me with your mailing address. In the interest of time, the one closest to Chicago. You can keep the test pattern, all you need to do is fit it up to your engine and let me know the ports all line up.
     
  19. Petey
    Joined: Feb 22, 2005
    Posts: 223

    Petey
    Member

    Just curious, how are you cutting those? Water-jet? Laser?
     
  20. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    Some are laser, some are machined.
     
  21. diego64
    Joined: Feb 13, 2007
    Posts: 28

    diego64
    Member
    from oceanside

    any new info on the buick I8 flanges.
     
  22. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    gasket is ordered, just waiting on it for a pattern.
     
  23. 41CAD
    Joined: Aug 21, 2007
    Posts: 6

    41CAD
    Member
    from Oregon

    cool I need some for my 346 CAD
     
  24. Anything for the 347 Pontiac????????
     
  25. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    Could be. We don't right now, but I could get some made up if there was enough interest. Anyone else?
     
  26. wide34
    Joined: Mar 2, 2006
    Posts: 480

    wide34
    Member
    from Texas

    Do you make them for a Ford 429?
    Thanks
     
  27. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    No. We pretty much just to pre-'64 power plants. We could do them for the 429/460. But you can just as easily get them from Hooker/Headman/etc. I could order you a set.
     
  28. wide34
    Joined: Mar 2, 2006
    Posts: 480

    wide34
    Member
    from Texas

    Thanks, I've tried the heddman and not been happy.
     
  29. HotRodChassis
    Joined: Jan 23, 2005
    Posts: 2,283

    HotRodChassis
    Alliance Vendor

    Well, we could make them up. I just don't get much call for them. What aspect were you unhappy with the Heddmans? That way I can correct the issue with ours.
     
  30. Scotch
    Joined: May 4, 2001
    Posts: 1,488

    Scotch
    Member

    Another vote for Buick 263 S-8.

    You rock for doing these, BTW...!

    ~Scotch~
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.