Register now to get rid of these ads!

Hot Rods New Desoto Hemi Blower Intake Tall Deck

Discussion in 'The Hokey Ass Message Board' started by 1961 impala, Oct 2, 2019.

  1. 1961 impala
    Joined: Oct 26, 2009
    Posts: 4

    1961 impala
    Member

    BE59DC33-A082-4C87-8E06-C46F27673797.jpeg 4CF63945-1936-478D-AD91-E8153C2A2249.jpeg 12A06D97-D5C7-4519-AA8F-871C947E13A7.jpeg F7D3178D-85EE-4CEF-A9AD-8F29320FD8F6.jpeg I have been patiently waiting the completion and arrival of the new Desoto Hemi intake that Hot Heads have been working on for the past several years. I have been on their waiting list and was notified last week that the first run of 30 intakes were completed and ready for sale. I immediately purchased one and it arrived yesterday. What a beautiful job the team at Hot Heads has done. The quality of the castings and machine work is top shelf. The manifold comes with a top mounting plate, built in thermostat housing, water neck, pressure relief valve, gaskets, o ring for top plate and a complete set of stainless steel fasteners. I can’t wait to start the long awaited build of my 1956 Desoto 341. Thanks Duane
     
  2. Bandit Billy
    Joined: Sep 16, 2014
    Posts: 7,975

    Bandit Billy
    ALLIANCE MEMBER

    That intake will also accept a bevy of other adapters Hot Heads provides, 2X4, 3X2 aside from the blower. What would Desoto fans do without them?
     
  3. 51 Hemi J
    Joined: Sep 27, 2006
    Posts: 394

    51 Hemi J
    Member

    Are they eventually making one for the low deck Desoto? Looks very nice!
     
    Deuces and loudbang like this.
  4. Correct me if I'm wrong, but I don't understand why they didn't cast the manifold for the low deck first. Then supply a couple of spacer plates to cover the high decks. All the Desoto's Hemi's would be covered.
    276 Desoto owner. :(
     
    Brand Apart and kidcampbell71 like this.

  5. looks good but didnt see it on the HH website ?
     
  6. Jturcotte4
    Joined: Nov 3, 2014
    Posts: 12

    Jturcotte4

    What size blower are you going with. I'd like to close the hood on my sweptline, and am hoping to adapt a Weiand 144 to that intake. Any insight is helpful
     
  7. wheeltramp brian
    Joined: Jun 11, 2010
    Posts: 1,209

    wheeltramp brian
    Member

  8. drfreeze
    Joined: Sep 18, 2008
    Posts: 291

    drfreeze
    Member

    What was the cost ?

    Sent from my SM-N975U using The H.A.M.B. mobile app
     
  9. Darrell Jones
    Joined: Nov 14, 2008
    Posts: 12

    Darrell Jones
    Member
    from Canada

    I've been looking at the same intake from HH... intake is $650 and the carb adapter is $290. At least that's what i was quoted.
     
  10. spanglishkings
    Joined: Jan 18, 2012
    Posts: 107

    spanglishkings
    Member
    from Napa, CA

    I just bought one of these manifolds and it came yesterday. Beautiful piece.
    Anyone out there know where I can find a 3x2 top plate for Strombergs? HH doesn't have them. Has to be a 6 bolt plate. Thanks
     
    kidcampbell71 likes this.
  11. spanglishkings
    Joined: Jan 18, 2012
    Posts: 107

    spanglishkings
    Member
    from Napa, CA

    Found one at Dashman's. Nice guy and has a lot of product.
     
    Beanscoot and Desoto291Hemi like this.
  12. PotvinV8
    Joined: Mar 30, 2009
    Posts: 160

    PotvinV8
    Member

    Very nice! Bob and the crew at Hot Heads are great people and do great work!
     
    kidcampbell71 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.