Register now to get rid of these ads!

Hot Rods My `61 F100 Unibody

Discussion in 'The Hokey Ass Message Board' started by FoMoCoPower, Oct 5, 2009.

  1. True, but Unibody doors are unique. I think the original question was about non-unibody doors. If your doors are Unibody, sounds like he can use them.
  2. Ditto. Any pics of the process?
  3. FoMoCoPower
    Joined: Feb 2, 2007
    Posts: 2,490


    Theres nothing wrong with my doors though. Solid as can be and very straight.
  4. TomCat 1
    Joined: Aug 13, 2007
    Posts: 354

    TomCat 1

    Love the wide rear rims. What size wheels and tires are you running and are you running the stock rear leafs and stock tubs? I've got a short uni '62 that I haven't started on yet. Did you get rid of the factory 9" because the explorer was narrower? What year explorer rear? Thanks

    Attached Files:

    Last edited: Oct 7, 2009
  5. rumblefish
    Joined: Sep 2, 2006
    Posts: 77

    from NE Ohio

    Great looking Uni! I'm building one as well but mine is going in a different direction....well in the front any ways! Noise High BBF FE! Should be drivable in the spring I hope.

    Attached Files:

  6. general gow
    Joined: Feb 5, 2003
    Posts: 6,270

    general gow
    Staff Member

    great looking little truck. very nice.
  7. firehawgcfd
    Joined: Sep 13, 2009
    Posts: 40


    Looks great! Do you know of any tech articles out there on the crown vic front end swap. I have a 61 and a 62 unibody, both short boxes. I am going to get one of them on the road soon for my son who turns 16 in May.
  8. FoMoCoPower
    Joined: Feb 2, 2007
    Posts: 2,490


    15x10 with 295/50/15`s. Truck did not have a 9" in it,was factory ordered with a posi so it had a Dana-44. Just wanted something newer that I didn`t hafta go through,and on the cheap. Rear was narrower,so it helped to achieve the look i wanted with the wheels.
  9. FoMoCoPower
    Joined: Feb 2, 2007
    Posts: 2,490


    No tech articles that I know of,but it`s alot eaiser than most of the aftermarket IFS setups out there. For the most part it is a bolt-in deal.
  10. Kustom7777
    Joined: Mar 3, 2001
    Posts: 5,183

    from Austin, TX

    great looking truck,,,,,i've owned several of those and am itching to get another for a daily driver
  11. Nick Flores
    Joined: Aug 13, 2009
    Posts: 1,357

    Nick Flores

    Very cool truck. I'm glad to find lots of other truck guys like myslef here.
  12. I've read this thread several times. It's got lots of good info and pictures on how to do the swap. But, it is REALLY easy.
  13. Haha, sorry we got a little sidetracked. a200rt2 (see below) asked about door interchangability. Good thing you're doors are solid, Uni doors can be hard to find.

  14. tjm73
    Joined: Feb 17, 2006
    Posts: 3,381


    I really dig this little truck and come back to look at it from time to time. I see Phuckupbukit has screwed with the pics like so many others. I hate them so I figured out how to pull clean images out of post 1.


Share This Page

Register now to get rid of these ads!


Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.