It has been awhile since I have posted pictures or even had a chance to work on the 54. Work has slowed down in the last few weeks so I have spent some Metal Health Time. The Granada bucket seat was to thick for me to fit between so I made seat risers and installed 65 Mustang bucket seats, I made the risers 10-1/2" tall and they are 2" too tale. I started filler on the box and am done filling holes on the fire wall. I have installed on inner fender but it does not fit right so I have to rework it and the install the drivers side. I also have some waviness in the pickup box sides so I am teaching my self how to heat shrink the metal- That is a slow process. I might but a shrinking disc and try that.