1925 ford model t touring sedan. I didn't build this car just got it and decided to see if anyone here is interested in a TROG or Hotrod Hill Climb builder. Has a 1937-38 flathead that has compression and turns freely. Said to be out of a running car pulled 8 years ago roughly. 94 2 barrel sitting on top. Pulled plugs and minor carbon on valves and looks good inside. Missing dist. Has stock manifolds and crossover tube. 3 spd mated to the rear and everything seems to work fine with gears and clutch. Rear is an ford rear end with Bones on it like a 60s rear I think. Set up for coil overs but has the rear spring hanger on frame. Juice brakes up front on good axle. Steering box and column included with all seats also. Comes with dual beam headlamps and stock headlight bar. 2 sets of fenders and stock model t hood. Good radiator included also. Gas tank looks still good also. Car needs minimal body work to be finished. Frame is a 2x3x1/4" frame with model a crossmember up front. 32 wires and some very traditional bias ply w tubes and still hold air. Looks like a posi slipper spring on front axle also. I'm asking 4 k for it. Tons of parts. This is a good foundation for someone looking to build a cool cruiser or race car. Trades considered but cash talks. And more pics upon request.