Model A Parts

A few remaining items I have for a Model A.

Side Motor Mounts and Cushions. New cushions but they were bolted up during mockup. Steel mounts were repaired/rebuilt using a jig and fit correctly. Outside plates, bolts and nuts included. SOLD



Throttle and choke parts/rods. Throttle assembly that bolts to the back of the block, choke control rod, fuel line - from firewall mounted fuel strainer to Model A carb, misc. linkage rods. $25.00



6V coils. Only one is pictured. I drove the car with this one so I know it works. The second on has a "Ford" script logo embossed in the can of the coil I have not run a car with it but believe it to be OK. Please PM or text with your cell number and I can get a photo of the 2nd coil if you'd like. $10.00 for 1st coil - $20.00 for the Ford Script coil.



Stock Model A flywheel. Need a spare to have lightened? Ring gear teeth are in good condition. $15.00 It's really heavy as you know so pickup would be best.



I also have various Model A engine parts including a good block, cranks, re-useable pistons and more. Contact me if you're interested. Cell number is below if you need other photos via text.

Lynn Winter
(573) 286-3335 Cell - Call or text with questions or to quickly get additional photos.

 

BTT

There is a chance I'll be making a trip in early January 2021 to the Columbus, OH area and would be happy to bring parts along to eliminate shipping cost. So, concern over the cost of shipping something with the weight and bulk of the engine blocks and other heavy items might just make a deal possible. In any case, I'm willing to sell and ship any of the parts adding only actual shipping cost.

In addition to the parts above, I have a very nice '30/'31 Ford Model A frame. SOLD. It's been cleaned (blasted?) and is in red primer. I've not noticed any issues other than very slight pitting.

Lynn
(573) 788-2574 Home
(573) 286-3335 Cell (I could text photos easily)
[email protected]

 

Parts listed above not marked SOLD are still available.

I'll add a set of 15" 5.5" bolt pattern wheels. 2-7" wide and 2-6" wide. SOLD


Once again I expect to be making a trip in late January to mid February, but to Indianapolis, IN instead of Columbus, OH. I'd be happy to bring any of the parts along to meet up and save shipping cost.

Lynn Winter
(573) 788-2574 Home/Shop
(573) 286-3335 Cell