Playing with my new toys...... Took the old Superflow 901 dyno out of service and installed a new 902 a few weeks ago This is our 4th new dyno and by far the best Heres a 324 Olds we been playing with this week..... Turn your speakers up Tony
Holy crap...I was waiting for a rod to go through the pan.. What was the rpm? It also sounded cool as it was coming back down to idle at the end. (inside joke from a few weeks back: not too shabby for a "V6")
LOL Thats a whole 5300 rpm I just started another thread with a chevy...Its 6500 rpm Enjoy I do have a cool occupation huh? Tony
"It also sounded cool as it was coming back down to idle at the end." If you notice we start our pull at 2500 at WOT Let him pull up along side one of these "v6's" lol My brake unit can stall a big inch motor Tony
I had 355 with a solid roller and AFR heads and some other goodies dynoed and we twisted it to 7800 and that was crazy wicked I run thru the gears at 7600 all day !! Bad A$$ !!
Be still, my revving heart! While listening to the first video, I was thinking, "For a motor that makes peak power at 5600 (stock), he is certainly exceeding that! Sounds more like 6500"!
Oh yes. Thats the best 'new music' I have heard recently. guy asked on an olds forum about a starter motor for a 324 so sent him your way.
guy asked on an olds forum about a starter motor for a 324 so sent him your way.[/QUOTE] Flatoz, Thanks for that!! Tony
It warms my heart knowing that I get to do the first big burn out with that motor. What was the HP? Marshall
Marshall, Will you be starting out with slicks? or is that what they'll be when your done Tony We can make that happen. Plenty of experiance,Dad has a 49 2dr club coupe Tony
The Jalopy Journal
