Hot Rods Lenco coupler information

I have a Lenco female coupler and I am wondering if the female coupler of Strange coupler ( U3651) is compatible . and does any one have experience with the two piece quick release coupler?
I am putting a powerglide in my dragster over the winter and already have a lenco coupler for the 3rd member, And I would like to be able to disconnect at the coupler to cackle the car.
Thanks
Merry Christmas
Howard

 

All couplers (lenco, M/W, Strange, Donovan) are the same and compatable

 

There is a long coupler available that will allow you to remove a clamp and slid it forward towards the trans and do ask you stated. The engine has to be out far enough to allow that to happen.

 

It sounds like you have your answer, those couplers are Greek to me .

 

Thanks for the answers guys.

Great pun Marty