Register now to get rid of these ads!

Technical jeep cherokee power steering conversion to 1955-56 ford

Discussion in 'Traditional Customs' started by simpletask, Mar 28, 2019.

  1. simpletask
    Joined: Mar 22, 2013
    Posts: 20

    simpletask
    Member
    from california

    Help, Help...jeep steering box is in, what pitman arm is available to use?
     
  2. jimmy six
    Joined: Mar 21, 2006
    Posts: 9,967

    jimmy six
    ALLIANCE MEMBER

    What's the spline/diameter on the box?
     
  3. Do you really think there is one that will just bolt right in place?
     
  4. ffr1222k
    Joined: Nov 5, 2009
    Posts: 1,180

    ffr1222k
    ALLIANCE MEMBER


  5. simpletask
    Joined: Mar 22, 2013
    Posts: 20

    simpletask
    Member
    from california

    Nope....being an old hot rodder sharing info was how we built our stuff... Followed mark t of PA, on the Journal, on the swap, everything was right on, except no "direction"
    to go for pitman arm!!!
     
  6. simpletask
    Joined: Mar 22, 2013
    Posts: 20

    simpletask
    Member
    from california

  7. You're probably getting that message because you're not a member of the 'group'...
     
  8. simpletask
    Joined: Mar 22, 2013
    Posts: 20

    simpletask
    Member
    from california

    Thanks jimmy six... 1.25 dia, 32total spline, 4 segments...Delphi 2605 76 28, 1999 jeep grand cherokee. Mark T of PA posted the conversion, followed his info, worked perfect, except pitman arm. I know I have to do some persuasion with my rosebud to reconfigure, just like to start somewhere!!
     
  9. It's been so many years since i tackled that project. But i think you can use the old pitman arm with some minor alterations to it.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.