Register now to get rid of these ads!

Interior Ideas...60 Chevy

Discussion in 'The Hokey Ass Message Board' started by MetalFlaked60, Feb 9, 2006.

  1. MetalFlaked60
    Joined: Oct 11, 2003
    Posts: 917


    I am about to get my interior done in my 60 tomorrow and I still dont know what color I sould do it in or materiel...Can I get some imput on this...What would look the best?


  2. MikeRose
    Joined: Oct 7, 2004
    Posts: 1,577

    from Yuma, AZ

    How about bright white or silver vinyl, tuck and roll with blue zodiac piping?
  3. Slag Kustom
    Joined: May 10, 2004
    Posts: 4,312

    Slag Kustom

    i would go the other way with a dark blue with white piping maybe white around the top of the seat and between the center of the seat
  4. 40StudeDude
    Joined: Sep 19, 2002
    Posts: 9,477


    A light colored interior "opens" up the space, while a dark colored interior tends to "close" it up...white means not so hot in the summer while a dark interior gets damned hot, even in the shade...I always opt for a light colored interior.

    vince89 likes this.

  5. Nads
    Joined: Mar 5, 2001
    Posts: 11,708

    from Hypocrisy

    How about a couple of hot naked chicks in the back?
  6. CPR Customs
    Joined: Dec 26, 2005
    Posts: 48

    CPR Customs

    A white base with either black or dark blue tuck and roll
  7. Squablow
    Joined: Apr 26, 2005
    Posts: 15,878


    White vinyl on the seats with white and blue on the door panels would look real nice and be period correct.

    Please, PLEASE tell me you're not using those modern bucket seats in the front of this car? No matter what pattern, color, or material you use, those seats are going to look like dogshit. You have a very 1960's looking car there and a set of 90's buckets are going to stick out like a boner in sweatpants. Go with a bench, or at least some very squared off, low back bucket seats, like Corvair, if you have to have buckets.
  8. MERG54
    Joined: Sep 7, 2004
    Posts: 146


    If you are going to use the new seats, and the shop your going to is decent then have them remove and fill the head rest mounts and have them reshape them more to match the rear seats.

    I would think that if you went true sixties stylewhite vinyl w/ diamond pattern in the inserts in a color similar to the darker tone, and match the piping to would have a real smooth custom look.

    I wish you could have thrown this out a few days before you were getting it done, I would have loved to sketch up a few ideas for you.

    everyone does roll and pleat, yet there were other eras of custom car interiors. I would stick to a good vinyl no matter what, it will age best.
  9. graverobber63
    Joined: Sep 8, 2004
    Posts: 4,133

    Alliance Vendor

    this one is killer

    Attached Files:

  10. Bloomdog
    Joined: Jan 17, 2006
    Posts: 93

    from Texas

    I would go with all white tuck and roll.:cool:
  11. MetalFlaked60
    Joined: Oct 11, 2003
    Posts: 917


    I think thats gonna be the choice..but with blue piping...I have taken the headrests off of the seat and they look alot better...these are old pics its been buffed out since these shots were taken...

    You can draw up a design if ya want...I dont have to take it tomorrow...Ill just wait till ya get it drawn up....
  12. Dude! I need your old door panels for my 60 wagon :eek: ....wait...looks like you don't HAVE any......:rolleyes:
  13. Nekronomicon
    Joined: May 23, 2005
    Posts: 814


    Do a search theres heaps of good pix on here. I have alot cause im about to get my 63 interior the time i put them here the interior will probably be half done. More time would of been good!!! :rolleyes:
  14. notebooms
    Joined: Dec 14, 2005
    Posts: 2,077

    Alliance Member

    Dude! If you get those panels for that 60 wagon.... give 'em to me... I need panels for my 60 wagon too.

    -scott noteboom


    Attached Files:

  15. MERG54
    Joined: Sep 7, 2004
    Posts: 146


    here is a quick sketch of what I was did not do it for me...but sticking to something similar to what was there factory...

    now on the light color...I think you have to feel out the white or the silver...then the lowwwer tone match it to the blue...

    Attached Files:

Share This Page

Register now to get rid of these ads!


Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.