Hot Rods I need some I-beam alignment help

One thing that isn't talked about much is king pin inclination . On most old Fords it should be 8 deg. if your camber is OK and but the pin inclination is off you have a bent spindle and cause bad handling.

 

I gave up using those dial angle finders for alignment and pinion angle.
http://www.speedwaymotors.com/Intercomp-102144-Digital-Angle-Gauge,46867.html
Not trying to be a smartass but your not ready the pointer to the same side of the center line as you go from one side of the car to the next.