Register now to get rid of these ads!

How many projects do you have going at the moment?

Discussion in 'The Hokey Ass Message Board' started by dirt slinger, Nov 7, 2010.

  1. rixrex
    Joined: Jun 25, 2006
    Posts: 1,433

    rixrex
    Member

    Too many, but I must like it that way..48 Cadillac has a leaky power steering pump that causes a horrible belt screech, fixing that, also needs paint and interior of course..53 Studebaker trunk popper solenoid quit working so I can't get into trunk and am paranoid to have a flat till I fix it, could use paint and interior of course..39 Chevy also has a horrible belt screech? but nothing is leaking onnit maybe just adjustment..59 Edsel has a fried transmission and it could use paint..am trying to sell my 29A project to raise money for a rolling chassis to put under my 34 Pickup..MGA is being brought out of retirement as well, bad gas tank I think...Sally is upholstering the front seat of the 48 Studebaker..
     
  2. slick a&t
    Joined: Dec 31, 2008
    Posts: 361

    slick a&t
    Member

    None at the moment.Slowly sold off the sport coupe project over the last two years.Hoping to slowly start buying parts again during the winter,now that work has increased.
     
  3. 1 the other 3 are done!!
     
  4. This winter I'm putting the finishing touches on the '54, Getting the '34 road worthy (swapping in a 59ab, '40 ford wheels/Firestones, wiring, etc...) and starting to mock up the Topolino I've been collecting parts for.

    I'm also just finishing up insulating my 24x40 shop - still don't have a heater though!

    It's gonna be a busy winter!!
     

    Attached Files:

  5. Zombie Plymouth
    Joined: Sep 13, 2008
    Posts: 142

    Zombie Plymouth
    Member

    three:
    1) 55 chevy
    2) 50 Plymouth
    3) 26 Dodge

    my wife wont let me have more.
     
  6. big bad john
    Joined: Aug 11, 2010
    Posts: 4,726

    big bad john
    Member

    ........Just one......Going to finish it this winter.....1937 Ford coupe
     
  7. Mr63
    Joined: Jan 31, 2010
    Posts: 130

    Mr63
    Member
    from Gilbert Az

    1963 vw in progress since I was 16 (that was in 1986)
    1947 plymouth sedan stalled due to adhd
    recent 1946 chevy pickup ben simmiring in the garrage since sunday
     
  8. 3Kidsnotime
    Joined: Oct 4, 2010
    Posts: 247

    3Kidsnotime
    Member
    from Utah

    I like to have just one at a time, but I have a family problem... usually works like this whe anyone in my family buys a new project means I get another project... so at this point I have 3 going on...
     
  9. Old Gold
    Joined: Dec 31, 2007
    Posts: 438

    Old Gold
    Member

    A few:
     

    Attached Files:

  10. mkilger
    Joined: Sep 4, 2009
    Posts: 424

    mkilger
    BANNED

    well lets see 32 pickup, 29 tudor, 29 bonneville roadster, 41 ford coupe, 54 chevy sedan delivery, 40 ford pickup, 40 ford sedan, I think that it but only really work on the 32 and Bonneville car right now.
     
  11. 34 Ford Pick Up
    32 Ford Sedan
    67 "S" code Mustang Convertable
     
  12. hillbilly4008
    Joined: Feb 13, 2009
    Posts: 2,924

    hillbilly4008
    Member
    from Rome NY

    Just started bringing parts home for another one today. that makes it....let me see here...4 unfinished cars, 1 pedal car, 1 radio flyer, 1 motorcycle.
     
  13. havi
    Joined: Dec 30, 2008
    Posts: 1,876

    havi
    Member

    I have more projects than garage space.... and that is a problem up here in the snow.
     
  14. chopt49
    Joined: Jul 5, 2006
    Posts: 945

    chopt49
    Member

    1949 Chevy Kustom
    1926 Ford Roadster ('40's gow-job)



    .
     
  15. BISHOP
    Joined: Jul 16, 2006
    Posts: 2,571

    BISHOP
    Member

  16. HotRod60F100
    Joined: Jul 13, 2004
    Posts: 1,196

    HotRod60F100
    Member

    YEEEEEEEEEEEEEEEEEEES!!!!!!!!!!!!!!!!!!!!!!!! it eats Camaro's and shits mustangs,not everyone drag races a belly button mobile!:p
     
  17. Captain Chaos
    Joined: Oct 16, 2009
    Posts: 652

    Captain Chaos
    Member
    from Missery

    uhmmm.....8 cars 3 motorcycles and a few old BMX .
    My attention is on my Amen Savior choppers and my 59ranchero at the moment though. although I did locate a 57 olds body at the swap meet yesterday ; )
     
  18. -51 Plymouth 3W coupe. (that one's been 15 years in the making, so it's no hurry)
    -The son's O/T Mustang corner burner.
    -The new supermodified (waiting on the money tree to sprout).
     
  19. yardgoat
    Joined: Nov 22, 2009
    Posts: 724

    yardgoat
    Member


    NO SNOW but understand the problem 100%,good luck.................YG
     
  20. Fat47
    Joined: Nov 10, 2007
    Posts: 1,460

    Fat47
    ALLIANCE MEMBER

    Thank God, I'm not the only insane one. Currently 4 projects:

    A 33 Dodge coupe----build pictures here on the HAMB

    48 Chevy pickup for the wife-----need to finish this before the end of the year (you know the Xmas present thing)

    49 Buick Sedanette----Body work all done and 455 set in place

    50 Ford----top chopped, chasis just about finished
     
  21. Holidazed
    Joined: Mar 4, 2003
    Posts: 44

    Holidazed
    Member

    56 Olds 98, camaro front clip, `68 455 engine.
    2001 Banshee atv for the sand (blew the motor up)
    12 x 16 shed in the backyard so I can clear some of the junk out of the garage, so I can get back to working on the Olds.
     
  22. chevyben
    Joined: Nov 14, 2010
    Posts: 70

    chevyben
    Member
    from washington

    One car 53 bel air,01 chev blown 496,one bike
     
  23. L-Diablo
    Joined: Sep 11, 2010
    Posts: 75

    L-Diablo
    Member

    well lets see
    1959 apache fleet side
    1963 ford econoline
    1967 lincoln continental
    1965 crysler imperial
    1972 firebird
    1960 c/10
    and the daily a 1993 corvette
     
  24. dmw56
    Joined: Jan 1, 2008
    Posts: 713

    dmw56
    Member

    Let's see! I'm currently working my 34 Ford 5 window and 50 Stude Champion. Gathering parts for my 29 Model A convertible. Then there is the 30 Model A pickup, the 54 Studebaker Pickup and the 35 Plymouth Tudor Sedan waiting to be worked on. Plus maintenance on the 65 Rambler 660 Classic , 68 Mustang Fastback, 70 AMX, 71 Challenger and 72 Chevelle.
     
  25. enfieldjoe
    Joined: Jun 5, 2009
    Posts: 839

    enfieldjoe
    Member
    from Eustis, FL

    Several more than I want to work at one time. Bought a 50 Merc, then bought a custom chassis for the 50, but got a good deal on a 51 Merc. Now looking at a reposessed 3/4 ton Ford pickup for the motor/trans for the 51 Merc. Decided to use the custom chassis on the 51 Merc, but took the 50 Merc apart to work the rust. Not a driver in the bunch, but lots of projects to work on.
     
  26. lonestarluck
    Joined: Apr 17, 2008
    Posts: 38

    lonestarluck
    Member

    58 2 door fairlane running drivable project, 62 chevy van and a 72 shovelhead are the main projects I've got going but there's always on the side!
     
  27. hammeredcoupe
    Joined: Feb 28, 2008
    Posts: 513

    hammeredcoupe
    Member
    from Tacoma,WA

    Two right now, and I fight the urge to bring something else home almost weekly. There are a lot of really good deals out there right now,but I'm trying to stay focused on what I've started.
     
  28. dirt slinger
    Joined: Jan 30, 2010
    Posts: 645

    dirt slinger
    Member

    Now I know that Im not the only one that drifts from project to project. It may sound insane but I love it!
     
  29. Strange Agent
    Joined: Sep 29, 2008
    Posts: 2,879

    Strange Agent
    Member
    from Ponder, TX

    '57 Buick Super
    '71 Mercury Capri (daily driver/project)
     
  30. noxided
    Joined: Aug 28, 2006
    Posts: 780

    noxided
    Member

    1961 Studebaker Lark, 1970 Beetle, 1953 Mercury, 1952 Chevy Truck and 1963 Lincoln and they all must be done in a few months.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.