Hot Rods How about a List and Pictures of Intakes with 4 carbs or more HotRods only

Not imports or direct port injection.

Lets describe/list the manufacturer and engine type.

I'll start SBC Offenhauser 6X2 and Weiand 4X2

Movin/on

 

Jot Horne made about 100 multi-carb intakes in the fifties. Olds, Cad, Hemi, and some Ford Y-Blocks.

 

Man-A-Fre 4X2 intake. Milner's car from American Graffiti with four 2bbl Rochester 2Gvs.

 

why not add /include pics and possible log types ??

 

This should help http://victorylibrary.com/mopar/edel.htm

 

edelbrock , manafre, weiand, offy, horne, crager, u-fab

 

This thread needs pictures and lots of them. It needs pictures of bare manifolds, and pictures of manifolds fully installed on engines with carbs and stuff.

 

Not a good picture but a here's a Weiand 4X2 with 97's on a 241 Dodge Hemi

 

would like to a weiand wc245 4x2 intake for 331-392 hemi with alternatives to carbs that are not stromberg 97's holley 94's ect. single barrels other two barrels. this is something i have seen so little of.

 

Picture of my OFFY 4X2 with (4) 2bbl Rochester 2GVs. Not quite finished, but you get the idea.

 

Early overhead Caddy Edelbrock 4x2. They also made these without heat risers.

 

Weiand WC245 with 4 97's. 392 Chrysler

 

lets see here

horne hemi 4x2
horne cadi 4x2
horne olds 4x2
horne y-block 4x2
cragar hemi 4x2
cragar olds 4x2
cragar cadi 4x2
edelbrock cadi 4x2
edelbrock olds 4x2
edelbrock sbc 4x2
edelbrock flathead 4x2
edelbrock 348/409 4x2
weiand hemi 4x2
weiand flathead 4x2
weiand sbc 4x2
offy sbc 4x2
man-a-fre- sbc 4x2
man-a-fre bbc 4x2
man-a-fre pontiac 4x2
man-a-fre sbford 4x2
fenton flathead 4x2
schnell flahead 4x2

this is just 4x2's and off the top of my head

 

gotha nailhead 6x2
gotha olds 6x2
offy everything! 6x2
nailhead
cadi
olds
hemi
y-block
348/409
edelbrock sbc 6x2
edelbtock 348/409 6x2
edelbrock olds 6x2
edelbrock nailhead 6x2
edelbrock cadi 6x2
edelbrock fe 6x2
edelbrock pontiac 6x2
edelbrock y-block 6x2
edelbrock mel 6x2
edelbrock sbc crossram 6x2
edelbrock pontiac crossram 6x2
edelbrock hemi crossram 6x2
edelbrock bbc crossram 6x2
cragar olds 6x2
cragar cadi 6x2
cragar hemi 6x2
weiand nailhead 6x2
weiand cadi 6x2
weiand olds 6x2
weiand hemi 6x2
weiand y-block 6x2

offy hemi 8x2
edelbrock hemi 8x2
cragar hemi 8x2

 

Weiand WC4D and a Man-e-Fre

 

heres a few pics

 

Saw an Edelbrock 60's Pontiac 6x2 that was essentially two manifolds with 3 crossovers between them at the swap meet today. If I didn't have 70's Pontiac motors I would've bought it.

Edit: Damn, Titus already mentioned it.

 

this is a 348 chevy intake with fuel injected strombergs .
(the chevy intake is for sale)
I am going to take the strombergs and put them on the ford cross ram

 

My SBC Edelbrock manifolds, C97 and X1.

Here are a few more, www.victorylibrary.com/mopar/edel.htm

 

Here is a link to a listing of multi-carb manifolds for Pontiac which I extracted from the A/M manufacturers catalogues:

http://www.thecarburetorshop.com/Pontiacmultiplemanifolds.htm

And here are links to a couple of pictures of the X-2 for Pontiac:

http://www.thecarburetorshop.com/X2-top.jpg

http://www.thecarburetorshop.com/X2-side.jpg

And a picture of the M-6:

http://www.thecarburetorshop.com/Edelbrock-MLP-6.jpg

Jon.

 

Hello, here are a few, over the counter and custom..
Duane.

 

I quess if you can't find one you like you could make one...................

Can' beat a nice Drag Star

 

Duane! Those are ridiculously Insane! I'm in total Envy!!!

 

mine...

Rat

 

Six Stromberg 97's on a 56 Ford Y block 312; Then more 312 , 3332 and FE 406 setups from the factory during Ford racing's hey day.
Normbc9

 

MMM.. Eye candy!!^^^^..

 

This may be what you are looking for. I have more but mostly with the Weber sidedraft 44 MM's.
Normbc9

 

here is a pic 6x2 offenhauser 6 stromberg 97's

 

‘56 Pontiac 317ci Edelbrock 6x2