Register now to get rid of these ads!
Auctions

Hemi Chrysler Desoto Firedome SBC Crankshafts Blocks etc.

Discussion in 'Parts For Sale' started by JF, Dec 3, 2018.

  1. JF
    Joined: May 15, 2008
    Posts: 519

    JF
    Member
    from Utah

    City: Salt Lake City

    State: Utah
    Price: 275
    prices vary, Cranks and blocks cranks $500 to 250
    Blocks $650 - 400

    Cranks as follows
    1.) SBC 283 10 rods 10 Mains Steel 3&1/4" stroke(needs balance, made from 327 cranks) casting #4577 (Forged Steel) $375 obo

    2.) SBC ? Cast #1130 approx 2.40" mains 2.09" rods

    3.) Crankshaft # 361798 ? Main Journals s have groove 2.480" Mains 2.220 Rods
    4.) Chrysler Hemi 354 .010 Mains .030 Rods Casting # 1323335 (needs turned)
    5.) 1956 1957 Desoto 20M 20 Rods nice (in bag)
    6.) Chevy 348 Crank # 32692 10 M 10 R Nice
    7.) 1955 301,331, 354 10 M 10 R in bag rear journal has some rust from long term storage
    8.) 354 Chrysler Hemi Crank 20 R 20 M casting # 1323335 nice (excepting on main journal has scratches.
    9.) SBC Large Journal 3.30" Stroke 10 R 20 M (forged Steel ) $375
    10.) 1956 Desoto castring # 1335785 10 R 30 M needs polish or turn, Slight rust spots on journal from storage.
    11.) Desoto 272 291 CAst # 1402624 2.355 M 2.043 Rods
    12.) Desoto 330 1956 # 1635785 10 R 10 M light rust on Journal from storage polish or turn.
    13.) Chrysler 354 Hemi 30 R 20 M (Needs polished?)


    Blocks
    1.) 1956 Hemi Firedome 330 Casting S23-22577 3.720+- bore
    2.) 1956 Hemi Firedome 330 Casting # S23-8375 3.710" +-bore
    3.) 1956 Hemi 354 NE-56 8501 (pan Rail crack, looks sealed or ?? 4" bore sleeved or fire rings?)
    4.)1956 1958 Hemi 354 Casting # 1619829-1 4" bore
    5.) GM Nailhead ? 322? Casting number 1165165 4.020+- bore Stamped into block head surface V 814287 7
    6.) Oldsmobile 394 4.020+- bore Casting # 574534 4&1/8"
    7.) Hemi 1955 331 NE 5541883 3.825"+- bore
    8.) Hemi Desoto 1952 276 Firedome S-17 45639 3.660 +- bore


    More Cranks not yet listed. (I do not have any Hemi 392 Cranks left, Sorry)
    disclaimer , the measurements in inches above were rough measurements with a caliper so some variance should/could be expected. if inquiring on a specific crank or block we can provide a more accurate measurement if needed however its best to view the parts in person to gauge the condition and usability. Free local pickup or freight qoute available. package sales always considered.

    phone calls at 801-six 94- 882six
    If Im at work I cant always take calls so please leave a message if I don't pick up and I will call you back.
     

    Attached Files:

    Last edited: Dec 3, 2018
    chasmatik likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.