Register now to get rid of these ads!

Hot Rods Help!! Waldens Stopped Lower pulley for Blower Drive

Discussion in 'The Hokey Ass Message Board' started by nitro29, Sep 30, 2014.

  1. nitro29
    Joined: May 26, 2005
    Posts: 66

    nitro29
    Member

    Hi, Does anybody have or could make a Cad Drawing of a lower pulley for a Crager 3 belt blower drive as I have just been waiting on one from Waldens who say that they have dropped the pulley due to a poor supply problem. As this is the only piece that I need to finish the drive for my flathead I am willing to pay for either a Cad drawing or for the Pulley its self. The pulley should suit a SBC. In advance, Thanks Roger.
     
  2. deto
    Joined: Jun 26, 2010
    Posts: 2,621

    deto
    Member

    Do you have a rough drawings?
     
  3. nitro29
    Joined: May 26, 2005
    Posts: 66

    nitro29
    Member

    Hello Deto. No I don't sorry Roger
     
  4. deto
    Joined: Jun 26, 2010
    Posts: 2,621

    deto
    Member

    If someone has one to pull dimensions from I can draw it.
     
    Register now to get rid of these ads!

  5. WaldenSpeed
    Joined: Feb 11, 2008
    Posts: 29

    WaldenSpeed
    Member
    from Pomona CA

    Holy shit! Just be patient!! I am still making all of the v-belt blower pulleys and all of the other drive parts. No one from Walden Speed said that we were going to stop making them!! They are being made at the CNC shop that I use. They are a big company so I have to wait my turn in line. I will have them
     
    GOATROPER02 and the metalsurgeon like this.
  6. 3wLarry
    Joined: Mar 11, 2005
    Posts: 12,804

    3wLarry
    Member Emeritus
    from Owasso, Ok

    ahahaha!
     
    kidcampbell71 likes this.
  7. the metalsurgeon
    Joined: Apr 19, 2009
    Posts: 1,239

    the metalsurgeon
    Member
    from Denver


    anything from your place is worth the wait for sure!
     
  8. nitro29
    Joined: May 26, 2005
    Posts: 66

    nitro29
    Member

    To Robert Walden , Please accept My most Humble Apoligizes as what I received in the E-Mail was that the pulley had been Discontinued. I will wait and I would like to again say sorry for any harm to Walden's reputation. Roger Harrison
     
  9. damm! hell of a catch because that ball looked like it was over the wall for sure! :cool: Impressive damage control!
     
    brandon likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.