Register now to get rid of these ads!

Hot Rods Help, I need a Yoke

Discussion in 'The Hokey Ass Message Board' started by raven, Aug 10, 2016.

  1. raven
    Joined: Aug 19, 2002
    Posts: 4,614

    raven
    Member

    Thrashing as usual and came up short. I need a yoke for a TH400. Anyone have one laying around their stash? Let me know. I'm trying to get the roadster back together before the drags and this (and the need to shorten the drive shaft) is going to break me...
     
  2. A monkey and a priest walk into a bar......... Oh, you said yolk, my bad.
     
    tb33anda3rd and LOU WELLS like this.
  3. raven
    Joined: Aug 19, 2002
    Posts: 4,614

    raven
    Member

    I should have expected that. Very funny...
    r
     
  4. belair
    Joined: Jul 10, 2006
    Posts: 8,605

    belair
    Member

    Beat me to it.
     

  5. Tim
    Joined: Mar 2, 2001
    Posts: 11,896

    Tim
    Member
    from Raytown Mo

    Does it overlap with any other transmissions or is it 400 only?
     
  6. raven
    Joined: Aug 19, 2002
    Posts: 4,614

    raven
    Member

    It's Benno's...
    r
     
  7. Have you a salvage yard near? HRP
     
  8. can you afford $69 ? part #802-92450 at speedway motors for a new one
     
  9. DDDenny
    Joined: Feb 6, 2015
    Posts: 14,303

    DDDenny
    Member
    from oregon

    Purely by my memory (for what it's worth?)
    Later B/W Super T'10
    Possibly some Muncie M-22
    Richmond Super T-10 ( I bought a new spicer yoke about $100 a few years ago).
    None of them terribly cheap, you either get (real lucky) and stumble onto a used one cheap, or bite the bullet and write the check, but they do crossover.
     
  10. The M-22 is the only one I ever knew about.

    I got one on a truck about 60 miles away. so 120 to get it then 120 to deliver it. If push comes to shove that'll be what has to happen. be easier if someone had one Even better if it was local.
     
  11. Inked Monkey
    Joined: Apr 19, 2011
    Posts: 1,824

    Inked Monkey
    Member

    How many spline is the 400? I know I have one around somewhere, or at least did, but I can only find a 27 spline one.
     
  12. studebaker46
    Joined: Nov 14, 2007
    Posts: 670

    studebaker46
    Member

    any drive line shop can shorten and balance your shaft and napa should have the yoke in stock
     
  13. Inked Monkey
    Joined: Apr 19, 2011
    Posts: 1,824

    Inked Monkey
    Member

    I found all the internals of a 400 and 3 27 spline yokes. With my luck these aren't the ones you need.
     
    Tim likes this.
  14. 35WINDOW
    Joined: Jul 7, 2005
    Posts: 454

    35WINDOW
    Member

    I have a new chromoly Strange 1350 Yoke (32 spline)-let me know if that works for you-
     
  15. aaggie
    Joined: Nov 21, 2009
    Posts: 2,531

    aaggie
    ALLIANCE MEMBER

    The shop doing the driveshaft should have the yoke, most do.
     
  16. Looks like they are 32 spline unless someone has different information.
     
  17. 53 ford
    Joined: Apr 8, 2012
    Posts: 143

    53 ford
    Member

    My turbo 400 from 78 chevy 1 ton had a bolt on yoke. I use the yoke from a 91 gmc truck 5 speed getrag. Works perfect. Harley
     
  18. raven
    Joined: Aug 19, 2002
    Posts: 4,614

    raven
    Member

    Got one from speedway. They guaranteed a Friday delivery and that is what I needed. Thanks guys for attending to my panic attack. (with humor).
    r
     
    MO_JUNK and Tim like this.
  19. Tim
    Joined: Mar 2, 2001
    Posts: 11,896

    Tim
    Member
    from Raytown Mo

    A lot of times if I order before 11Am I'll get it before 11am the next day. See ya soon!
     
  20. raven
    Joined: Aug 19, 2002
    Posts: 4,614

    raven
    Member

    Man, I hope so. Are you driving down with us next week?
    r
     
  21. Tim
    Joined: Mar 2, 2001
    Posts: 11,896

    Tim
    Member
    from Raytown Mo

    Leaving around 3 on friday
     
  22. raven
    Joined: Aug 19, 2002
    Posts: 4,614

    raven
    Member

    I'm hoping to get on the road Thursday night. I'll see at the hotel.
    r
     
    34toddster likes this.
  23. Tim
    Joined: Mar 2, 2001
    Posts: 11,896

    Tim
    Member
    from Raytown Mo

    lol I'll see you before then ;)
     
  24. Leaving on Thursday is a pipe dream when your favorite mechanic is a two speed and final drive is a granny 4.86:1. ;)

    I'll see both of you on Sunday.
     
    Tim likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.