Register now to get rid of these ads!

Hello Real Hot Rodders

Discussion in 'New to the H.A.M.B.? Introduce yourself here!' started by WoooDaaaa, Dec 15, 2006.

  1. WoooDaaaa
    Joined: Dec 14, 2006
    Posts: 43

    WoooDaaaa
    Member

    I've been looking at this site for some time because it covers the life I have been living for the last 50 years. Don't know why I have'nt joined yall before now but here I am. I am 63 years old and started working on cars when I was 13. The first cars I had were a 1932 Austin roadster and a 1935 Austin coupe. Of course I ran the roadster without fenders and hood side pannels. All the parents in the neighborhood thought I was a crazy hot rodder at the age of 14 :D . I still have these cars! From there I got into 1940 fords and still have a 40 coupe with a Nailhead Buick and 4 speed. My every day driver for along time was a 1934 ford c-dan with a 301 sbc and still have that car. One project I am ancious the get back on is a 29 coupe on 32 rails with a 48 merc flathead. At present I have about 13 project cars in the shop and love every one of them!!! I am retired and speend all day every day in he shop. I will definitely be at the HAMB drags this comming August and hope to meet some of yall there and see your real hot rods. WoooooooooooDaaaaaaaaaaaaaaaaaaa
     
  2. Sutton
    Joined: Apr 7, 2005
    Posts: 699

    Sutton
    Member
    from BTR

    Welcome to the HAMB...we need more BR Hambers
     
  3. Assdragger
    Joined: Jan 28, 2002
    Posts: 811

    Assdragger
    Member

    Welcome, sounds like you have some nice toy`s!

    Any pic`s?
     
  4. david4991
    Joined: Feb 1, 2006
    Posts: 105

    david4991
    Member
    from Louisiana

    Welcome.
    I'm from Denham Springs.
     

  5. k9racer
    Joined: Jan 20, 2003
    Posts: 3,091

    k9racer
    Member

    Welcome from alabama.. last time I was in BR I visited LSD.. I love to explane that one...... Bobby..
     
  6. ManiacT
    Joined: Dec 15, 2006
    Posts: 66

    ManiacT
    Member

    Hey Woodaaa,
    Nice to know you plan to do the model a but you better get that sbc truck going first.
    Know what you mean about working on the cars for a long time. I had to stop and that was a big mistake.
    I now follow my dream and hope to do so until I turn into rust myself.
    Remember it's better to be a tooler than an ugger !!!
    MaNiAcT....
     
  7. Creature13
    Joined: May 13, 2006
    Posts: 354

    Creature13
    Member

    Welcome... Happy New Year!
     
  8. Bassfire
    Joined: Nov 17, 2006
    Posts: 468

    Bassfire
    Member
    from Mart, Tx.

    Wecome to the HAMB
     
  9. WoooDaaaa
    Joined: Dec 14, 2006
    Posts: 43

    WoooDaaaa
    Member

    Bobby, I know what ya mean...my wife works part time at LSD. When someone asks where she is, I say she is at LSD yelling at the kids! :rolleyes:
     
  10. WoooDaaaa
    Joined: Dec 14, 2006
    Posts: 43

    WoooDaaaa
    Member

    I'm glad to hear that! What do you need the 94/97's for?
     
  11. WoooDaaaa
    Joined: Dec 14, 2006
    Posts: 43

    WoooDaaaa
    Member

    Never mind all that crap...you just keep chewing on that T-bone.
     
  12. The37Kid
    Joined: Apr 30, 2004
    Posts: 28,275

    The37Kid
    Member

    Welcome to the HAMB, sounds like you'll fit in nicely. There is an Austin a Pennsylvania member has that should be out this year. Best wishes, Bob
     
  13. WoooDaaaa
    Joined: Dec 14, 2006
    Posts: 43

    WoooDaaaa
    Member

    Hey Bob, we went to Butler, Pa. this past year for the 75th aniversary of the Austin. Most Austins I have ever seen! The Austin/Bantams were built in Butler. Part of the original factory is still there. There was a guy down here that raced a Bantam coupe with a blown olds engine for many years...awesome:eek: . Hey, is that a 37 Harley ..flathead or knuckle in your avatar? Can't see the picture very well...I have a 32 VL.
    Later, Robert
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.