Register now to get rid of these ads!

Hello from cascade, Iowa

Discussion in 'New to the H.A.M.B.? Introduce yourself here!' started by binderbart, Jan 28, 2012.

  1. binderbart
    Joined: Jan 27, 2012
    Posts: 104

    binderbart
    Member
    from iowa

    New to this site, a link on another site brought me here. In the gathering stage of building a rat rod/ custom/traditional....Don't even know what I'm actually going to build. It will probably be a Bart Built when I'm done cause this time I'm not going to follow any rules I'm just going to do it the way I want and what feels right at the time. I followed the rules to a t when I did my 73 scout. It will be great to just do one the way I want. Its a 56 I.H. truck. and I plan on dropping it on a scout travaler frame and drive train complete with a 345 v-8, 727 torqueflite and dana 20 transfer case. probably use 354 geared dana 44's. good all around axle. this will probably always be a work in progress. this seems like a cool site with some great people in it. well a big HELLO to everyone.
     
  2. bob cutler
    Joined: Jul 8, 2009
    Posts: 291

    bob cutler
    Member

    Hi from washington ia, just so you know dont mention rat rods on here, it upsets some people, not me though enjoy your self on here lots on good info.
     
  3. nabby98
    Joined: Oct 30, 2010
    Posts: 28

    nabby98
    Member
    from Amana, IA

    Hello from Amana, IA.
     
  4. Master of None
    Joined: Dec 18, 2009
    Posts: 2,279

    Master of None
    Member

    Welcome from Rockwell city,Ia
     

  5. carmak
    Joined: Aug 8, 2005
    Posts: 451

    carmak
    Member

    Welcome from Riverside, IA.

    Post some pictures of your binder.

    I have lots of family in Monti and a great car friend up in Dyersville. Good car country up there.

    Carmak
     
  6. IAVWGUY
    Joined: Nov 19, 2010
    Posts: 110

    IAVWGUY
    Member

    Welcome from Sioux City, Ia
     
  7. 60 ford
    Joined: Nov 23, 2007
    Posts: 1,806

    60 ford
    Member

    Welcome from Indiana.
     
  8. Welcome from Davenport Iowa !!! Right on the Mighty Mississippi river !! There is a lot of talent & knowledge here for any question or needed tech tip, just try a search or ask your question here and you will get results. but first, let me tell ya DO NOT SAY RATROD ,they dont like that kinda language here on the Ol HAMB. Be respectful and some of these guys will bend over backwards to help you out. Take care & Be well
     
  9. chevydave1965
    Joined: May 2, 2010
    Posts: 370

    chevydave1965
    Member
    from Iowa

    Welcome from Marshalltown !
     
  10. Say "ratrod" if you want, but understand the term "ratrod" is discouraged on the HAMB. Building a roots hotrod is encouraged. Hope your build goes well. Welcome to the HAMB!
     
  11. Welcome from Minnesota
     
  12. norms30a
    Joined: Jul 17, 2008
    Posts: 575

    norms30a
    Member

    Welcome from southeast SD
     
  13. khead47
    Joined: Mar 29, 2010
    Posts: 1,776

    khead47
    Member

    Welcome from Mi.
     
  14. binderbart
    Joined: Jan 27, 2012
    Posts: 104

    binderbart
    Member
    from iowa

    got it.
     
  15. TexA
    Joined: Sep 7, 2010
    Posts: 13

    TexA
    Member

    HELLO from Estherville, iowa.....

    I'm working on a 1930 Model A Coupe.
    50s/60s-type Street Rod under re-construction.
    302 w Full-fendered/running boards but no air/PS etc
    Just a Cruiser :)
     
  16. A big welcome from Des Moines! Be careful using the "R" word around here. Hope to see you at Vintage Torque Fest!
     
  17. binderbart
    Joined: Jan 27, 2012
    Posts: 104

    binderbart
    Member
    from iowa

    got the R word thing. been to both of the torque fest so far. great time each time. and , a big hello back from the Busted Knuckle Garage in cascade Iowa. If ever you should be passing by, stop in for a cold one. I"m new to all this. not even sure what to classify what I'm going to build. Just going to dive in and see what comes of it. you ever make hawkeye downs swap meet? or Jefferson, wisc? the torque fest is only about a half hour away from here. thats a big benefit. Last year my brother and I walked out of the blue building and met Frank Fritz from american pickers. that was kinda neat.
     
    Last edited: Jan 31, 2012
  18. binderbart
    Joined: Jan 27, 2012
    Posts: 104

    binderbart
    Member
    from iowa

    took a minute today and shot some pics of what I'm going to build. thought I would pop in and post them. this is just the body, I apologize for all the junk that gathered around it, and how quick that happens.
     

    Attached Files:

  19. robleticia
    Joined: Oct 15, 2007
    Posts: 2,497

    robleticia
    Member

    Welcome from Texas!
     
  20. out plowing
    Joined: May 5, 2010
    Posts: 369

    out plowing
    Member

    Welcome from Waverly, IA
     
  21. The Show is a truely awesome time isn't it!! I usually make it to Hawkeye downs in the fall. I was there last yearset up next to John (coolstuff) and helped him out alittle at his booth. Sounds like we'll see you in a few months, I'm not very hard to find (should be the only 1 armed guy there, possibly waering an army helmet that says LEFTY!), look me up at the show.
     
  22. binderbart
    Joined: Jan 27, 2012
    Posts: 104

    binderbart
    Member
    from iowa

    I will , hey, he didn't have any posters left when I talked to him at hawkeye, I got torquefest posters on the wall at the shop for the last 2 years would like to hang one for this year and give you guys some advertising. if you think you can get me one I'll send you my mailing address.
     
  23. verno30
    Joined: Aug 25, 2008
    Posts: 1,090

    verno30
    ALLIANCE MEMBER

    hello from nearby Dubuque, IA
     
  24. Willy_P
    Joined: Mar 19, 2011
    Posts: 762

    Willy_P
    Member

    Welcome from Kansas.
     
  25. styleline
    Joined: Feb 14, 2009
    Posts: 868

    styleline
    Member
    from so-hol

  26. tommyd
    Joined: Dec 10, 2010
    Posts: 11,480

    tommyd
    Member
    from South Indy

    Welcome from Indy.
     
  27. 40StudeDude
    Joined: Sep 19, 2002
    Posts: 9,467

    40StudeDude
    Member

    Welcome from Aurora, ColoRODo, from a used-to-be-Iowegian...born and raised in Denison...and thot I knew all the towns in Iowa...cuz I used to terrorize them in my three year old '57 Chevy back in the day, but damned if I can place Cascade...

    R-
     
  28. E HANSEN13
    Joined: Aug 2, 2009
    Posts: 500

    E HANSEN13
    Member

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.