Hey guys, first official question so far... Just mocking up some pieces to get a feel for dimensions, etc. These are repo 28/29 wheel wells placed on the new subrails that I just jigged up. Should the wheel wells have a bend in them to follow the jog in the back of the subrails? My model A is toast in these areas, so I don't have a reference. See pic of the gap...
I just checked my '29, which I added new w/w to new subrails. I did fold the bottom under and up the inside and theres about a 1/4" gap that tapers back to nothing at the rear. Don't know if that's correct or not. The subrails are curved as you mentioned, the w/w are straight. RB