Register now to get rid of these ads!

Projects Frenzel Supercharged Ford 1936 3 Window Coupe-Chopped Build

Discussion in 'Traditional Hot Rods' started by TWO9FORD, Jan 17, 2021.

  1. TWO9FORD
    Joined: Apr 16, 2017
    Posts: 55

    TWO9FORD

    I figured I would start a build on my 1936 Ford 3 Window Coupe since I am finally back after it.
    You can follow along on my IG @Spankys_garage
    Going to have a solid chassis/suspension underneath, pretty engine and interior, and rough outside...

    Chopped and roof filled by the Menges Twins Speed Shop:
    IMG_1742.jpg
    Screenshot_20200703-175716_Instagram.jpg
    FB_IMG_1594415743483.jpg
    FB_IMG_1594415737859.jpg
    Frenzel Supercharger by Aaron Loveless and hand delivered by a Cessna:
    IMG_0982(1).jpg
    Anthracite powdercoating on the Eddie Meyer Heads and Black for the intake. Duel Stromberg 97's
    20201030_173718.jpg
    Filled in the firewall and painted it Wimbledon White:
    20201025_143925.jpg
    Stock 36 front axle dropped 5" by Anson Axles with 2 leafs removed from the stock leaf. Flattened rear crossmember by John w/ Brass Junkie:
    119468478_3458312144234474_5095099855350534957_o.jpg
    Custom glass all the way around... Getting the hood and decklid louvered Monday by Gene Winfield...
    139781758_3799107880154897_3274375562070352251_o.jpg
    Old cloth style wires...
    139825487_3798989153500103_2802572144234472275_o.jpg
    Just because:
    131979028_3733194843412868_1851341919168633762_o.jpg
    Finally sitting on all fours... I like the stance and love me some wide fives!
    IMG_20210113_162231_583.jpg
    Currently at
    Hot-rod Chavik for some finishing and customizing. Body is coming off and frame is getting blasted, then add a T-5 Trans, and some mods (flattened rear crossmember) then powder coating it to have a good base to start from. Run brakes, Fuel, Power, Suspension, Open Driveline, and fire that baby up!
    139520453_3798989526833399_1585496756880305393_o.jpg
     
    j hansen, Sprout, ibflyin and 41 others like this.
  2. Kiwi 4d
    Joined: Sep 16, 2006
    Posts: 2,972

    Kiwi 4d
    ALLIANCE MEMBER

    Absolutely wicked, there clearly has been some serious thought gone into this one. Its going to be a game changer.
     
    TomT, chryslerfan55, fegsta and 2 others like this.
  3. TWO9FORD
    Joined: Apr 16, 2017
    Posts: 55

    TWO9FORD

    Thank you! Its a dream build so I am pulling out all the stops and having some serious talen lay their hands on it....
     
  4. x77matt
    Joined: Mar 2, 2004
    Posts: 713

    x77matt
    ALLIANCE MEMBER

    Awesome!
     
    TWO9FORD and loudbang like this.

  5. akoutlaw
    Joined: May 13, 2010
    Posts: 847

    akoutlaw
    Member

    Nice! Do you have any in progress pics of the chop?
     
    chryslerfan55, TWO9FORD and loudbang like this.
  6. $um Fun
    Joined: Dec 13, 2008
    Posts: 549

    $um Fun
    Member
    from Nor Cal

    That is just too cool as a jewel.
     
    TWO9FORD and loudbang like this.
  7. Rustygt
    Joined: May 18, 2014
    Posts: 195

    Rustygt
    Member
    from Emeryville

    A cool looking rod for sure that Frenzel is like unobtainable to most
    Enjoy your dream
     
  8. hotcoupe
    Joined: Oct 3, 2007
    Posts: 505

    hotcoupe
    Member

    Wowza!
    Tom
     
    loudbang and TWO9FORD like this.
  9. brady1929
    Joined: Sep 30, 2006
    Posts: 8,550

    brady1929
    Member

    Incredible.
     
    loudbang and TWO9FORD like this.
  10. TWO9FORD
    Joined: Apr 16, 2017
    Posts: 55

    TWO9FORD

    I do have a decent amount of pics... I will post some up if you would like?

    Thank you!
    Thank you! Not sure how I got here but I'll take it and enjoy the build and ride!
    Thanks!

    Thank you!
     
  11. hotcoupe
    Joined: Oct 3, 2007
    Posts: 505

    hotcoupe
    Member

    A car like that, you should consider using Lincoln Zephyr brakes, REAL ones.
    Tom
     
    chryslerfan55 and TWO9FORD like this.
  12. akoutlaw
    Joined: May 13, 2010
    Posts: 847

    akoutlaw
    Member

    Please! Thank you!
     
    loudbang, chryslerfan55 and TWO9FORD like this.
  13. Is the Frenzel a new made piece. Great looking car & engine.
     
    loudbang, chryslerfan55 and TWO9FORD like this.
  14. Doc.
    Joined: Jul 16, 2005
    Posts: 3,551

    Doc.
    ALLIANCE MEMBER

    Great looking build. Definitely not an original Frenzel. Nothing wrong with that,just answering a question
     
    loudbang and TWO9FORD like this.
  15. TWO9FORD
    Joined: Apr 16, 2017
    Posts: 55

    TWO9FORD

    It is a repop of the original.. #6 ... Best part is it has a few updated parts and I was told to run the crap out of it and if there's any issues, just bring it back in... and you bet I'm going to try...
     
    rumblytruck, VANDENPLAS and loudbang like this.
  16. TWO9FORD
    Joined: Apr 16, 2017
    Posts: 55

    TWO9FORD

    Had an epic day today at Gene Winfields getting 274 Louvers done on the hood and decklid... Great time with Great People!
    140188668_3805881256144226_1287154409278211237_o.jpg 140395529_3805882506144101_8875461345948231423_o.jpg 140041873_3805882209477464_2749156848750881887_o.jpg 139770371_3805882916144060_6890458454123286386_o.jpg 140111285_3805881889477496_1216862692649953558_o.jpg
     

    Attached Files:

  17. TWO9FORD
    Joined: Apr 16, 2017
    Posts: 55

    TWO9FORD

    Body was pulled and frame was taken apart to send out to get media blasted, do some fab work, then powder coat it... All by Hot Rod Chavik
    20210119_081152.jpg 20210119_084559.jpg 20210119_124624.jpg 20210119_144231.jpg
     
  18. 41rodderz
    Joined: Sep 27, 2010
    Posts: 5,385

    41rodderz
    Member
    from Oregon

  19. b4autodark, VANDENPLAS, Stogy and 8 others like this.
  20. JOHN H EDGE
    Joined: Dec 8, 2015
    Posts: 349

    JOHN H EDGE
    Member

    Love those chopped coupes ours has small block Chevy with mustang 2 front end and 9 inch ford with coil overs
    D0AEFEDC-C337-43AD-A79B-56C759655087.jpeg
     
  21. flatheadpete
    Joined: Oct 29, 2003
    Posts: 10,112

    flatheadpete
    Member
    from Burton, MI

    Uh....Flathead, check. Blower, check. Bad ass chopped coupe, check. Dang. Checks all the boxes for me.
     
  22. hotcoupe
    Joined: Oct 3, 2007
    Posts: 505

    hotcoupe
    Member

    Cool set-up, just curious, how are you going to drive the generator?
    Tom
     
    TWO9FORD likes this.
  23. akoutlaw
    Joined: May 13, 2010
    Posts: 847

    akoutlaw
    Member

    I love the look of this car! Were you the ones who chopped it? I have a 36 to do some decade, & would like the chop to look like this. Thanks.
     
    TWO9FORD and loudbang like this.
  24. fegsta
    Joined: May 17, 2020
    Posts: 311

    fegsta

    Gene made a massive impression on my grandson Liam. Liam said the same that man never stops. We was hopefully going to get over to tour his place. Anyway gene told Liam he was cool and that was that. 1592645230138.jpeg

    Sent from my KOB-L09 using The H.A.M.B. mobile app
     
  25. fegsta
    Joined: May 17, 2020
    Posts: 311

    fegsta

    loudbang, TWO9FORD and chryslerfan55 like this.
  26. TWO9FORD
    Joined: Apr 16, 2017
    Posts: 55

    TWO9FORD

    Very nice 36!!

    Thank you!! I had the same checklist! lol!

    Thats a great question and thats the game plan tomorrow... ill post what we come up with...

    Menges Twins Speed Shop in Creston, CA chopped it... they are legit!
     
  27. JOHN H EDGE
    Joined: Dec 8, 2015
    Posts: 349

    JOHN H EDGE
    Member

    Didn’t do the chop. Was done many years ago we upgraded
    The suspension and added a/c. Have had several guys get the dimensions from the windows to use for their cuts
     
    Stogy, fegsta, loudbang and 1 other person like this.
  28. AmishMike
    Joined: Mar 27, 2014
    Posts: 517

    AmishMike
    Member

    Love your hot rod. Any idea of boost & how rise by rpm?
     
    loudbang likes this.
  29. TWO9FORD
    Joined: Apr 16, 2017
    Posts: 55

    TWO9FORD

    A little more progress on the car....
    Body ready to be removed.
    20210119_081152.jpg
    20210119_084559.jpg
    20210119_102228.jpg
    original frame was shot... found a 40 frame here on the HAMB to change out..
    20210119_085847.jpg
    Flattened rear crossmember:
    20210119_090211.jpg
    Front frame horns were tweaked on the 40 frame so they were cut out and swapped from the original frame:
    20210125_152226.jpg
    20210126_131631.jpg
    Flattened crossmember, open driveline kit, and mocking up the T-5 trans and engine:
    20210127_144859.jpg
     
  30. TWO9FORD
    Joined: Apr 16, 2017
    Posts: 55

    TWO9FORD

    Little more on the adapter and trans:
    20210120_080533.jpg 20210120_132147.jpg 20210126_074731.jpg 20210126_074734.jpg 20210126_075349.jpg 20210126_112744.jpg
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.