Register now to get rid of these ads!

Featured Projects Free car build to honor HAMB Andy

Discussion in 'The Hokey Ass Message Board' started by Jake_Lancer, Sep 12, 2017.

  1. Jake_Lancer
    Joined: Aug 26, 2017
    Posts: 33

    Jake_Lancer
    Member

    Hello everyone! I have recently received a free car through the H.A.M.B from unclescooby and I wanted to start a build thread to update everyone on the progress. The car is a 1952 Chrysler Windsor 2 door. (I'll leave a link to the free car thread at the bottom if you want to check out how I got this car!) I wanted to do something more than just a normal car build like everybody else does I heard about a young man who was on the H.A.M.B named HAMB Andy, and I have to say that I am touched by his story, so I wanted to do a car build to honor HAMB Andy. So far, I have a list of a few things that I know for a fact I'll need. I'll post more when we decide on a more detailed plan.
    Almost all glass
    Left trunk hinge
    1 Coker classic white wall tire (P205/75R15)[i have 3 already]
    Most of the interior
    link to free car thread: https://www.jalopyjournal.com/forum/threads/free-car.1074803/
    IMG_0237.PNG IMG_0238.PNG IMG_0240.PNG
     
  2. flamedabone
    Joined: Aug 3, 2001
    Posts: 4,009

    flamedabone
    ALLIANCE MEMBER

    I can't even take my HAMB Andy T shirt out of the closet without tearing up a little...

    Good luck with the car.


    -Abone.
     
    Wurger, dwollam, koolkemp and 4 others like this.
  3. Blues4U
    Joined: Oct 1, 2015
    Posts: 1,701

    Blues4U
    Member
    from So Cal

    Hey Jake, best wishes to you on this project. Don't get discouraged if things seem to get difficult or seem to be taking a long time, everything of value takes effort and if it was easy everybody would do it. Just stick to it, and little by little it will get done and you'll have something to be very proud of. You've got a great resource of people here willing to help, so don't be afraid to ask. Good luck!
     
    LBCD, Wurger, dwollam and 5 others like this.
  4. slim38
    Joined: Dec 27, 2015
    Posts: 106

    slim38
    Member
    from Sudan TX
    1. H.A.M.B. Chapel

    Cool! Good luck. Hope u have a blast while your doing it.
     
    Register now to get rid of these ads!

  5. brady1929
    Joined: Sep 30, 2006
    Posts: 7,130

    brady1929
    Member
    from Mesa, Az

    Congrats and good luck.
     
  6. Hombre
    Joined: Aug 22, 2008
    Posts: 332

    Hombre
    ALLIANCE MEMBER

    Now the fun begins. Get after it son, you have some very good folks ready and willing to help so I am sure this is going to be interesting. I like the HAMB Andy aspect as well should provide good inspiration.
     
  7. Jalopy Joker
    Joined: Sep 3, 2006
    Posts: 18,286

    Jalopy Joker
    Member

  8. 56 Dodge Pickup
    Joined: Jul 1, 2009
    Posts: 1,286

    56 Dodge Pickup
    ALLIANCE MEMBER
    1. H.A.M.B. Chapel

    Subscribed can't wait to watch this one! Hobo Jim
     
  9. Congrats on the car and thanks for starting the build thread. I will be following along.
     
  10. shivasdad
    Joined: May 27, 2007
    Posts: 385

    shivasdad
    ALLIANCE MEMBER
    from Texas

  11. unclescooby
    Joined: Jul 5, 2004
    Posts: 4,813

    unclescooby
    Member
    from indy

    I've got some back glass I'll send you tomorrow
     
  12. Thor1
    Joined: Jun 6, 2005
    Posts: 830

    Thor1
    ALLIANCE MEMBER

    Jake,

    Welcome aboard! I am looking forward to your build and seeing your vision for the car. As has already been mentioned you have a lot of support and resources available here on the HAMB. Don't be afraid to ask for help or advice.

    Go Man Go!

    Thor
     
  13. cactus1
    Joined: Apr 10, 2006
    Posts: 7,924

    cactus1
    ALLIANCE MEMBER

  14. Stogy
    Joined: Feb 10, 2007
    Posts: 3,355

    Stogy
    ALLIANCE MEMBER

    Thats pretty darn touching stuff. Go Jake Go!!!
     
  15. Glad you got the thread started right away. I'll be checking it out.
     
    RockinRivi and lothiandon1940 like this.
  16. woodbutcher
    Joined: Apr 25, 2012
    Posts: 2,441

    woodbutcher
    Member

    :D Outstanding young sir.Will be following along.
    Good luck.Have fun.Be safe.
    Leo
     
  17. I still get misty eyed when I think about Andy,He was a kid that taught all of us how to be thankful for every day,he went through so much pain and always had a smile on his face. HRP

    upload_2017-9-13_12-3-55.jpeg
     
    pitman, catdad49, ROCKER77 and 23 others like this.
  18. dickster27
    Joined: Feb 28, 2004
    Posts: 2,917

    dickster27
    Member
    from Texas

    Count me in on anything that is remotely connected to our young inspiring Hamb Andy. He was a real mentor to us all.
     
    crminal, Blues4U, unclescooby and 4 others like this.
  19. Legends47
    Joined: Feb 15, 2014
    Posts: 140

    Legends47
    ALLIANCE MEMBER

    Congratulations, good luck on the build. That is a great that you are honoring HAMB Andy. I will be following along.
     
  20. Fedcospeed
    Joined: Aug 17, 2008
    Posts: 1,841

    Fedcospeed
    Member

    Outstanding!!!
     
    chryslerfan55 likes this.
  21. seanbelushi
    Joined: Jan 26, 2011
    Posts: 136

    seanbelushi
    Member

    How about setting up a Patreon account where we can donate to the cause? Even just $5-10 from a few of us would help this fine young man along the way towards getting his tires and glass.
     
  22. cvstl
    Joined: Apr 15, 2009
    Posts: 1,248

    cvstl
    Member
    from StL MO
    1. H.A.M.B. Chapel

    Hey Jake, I've got no 52 Chrysler parts and don't expect to in the near future, but I'm local and can lend a hand if you need, and I do have a friend that's a big 50s Mopar guy so I can see what he may know of in the way of local parts.
     
  23. 1959Nomad
    Joined: Jun 21, 2009
    Posts: 1,794

    1959Nomad
    Member

    Congratulations on the deal, looking forward to seeing what you do with the car!
     
    chryslerfan55 likes this.
  24. NashRodMan
    Joined: Jul 8, 2004
    Posts: 1,158

    NashRodMan
    Member

    This is gonna be an epic thread.
     
    hotrodharry2 and chryslerfan55 like this.
  25. pumpman
    Joined: Dec 6, 2010
    Posts: 2,210

    pumpman
    ALLIANCE MEMBER

    Good for you, I was happy to see that you were chosen and can't wait to see your progress as we follow along.
     
    dwollam and chryslerfan55 like this.
  26. I'm in, great stuff.
     
    chryslerfan55 likes this.
  27. Jake_Lancer
    Joined: Aug 26, 2017
    Posts: 33

    Jake_Lancer
    Member

    Here are just a few more photos of the car. I was able to piece together a front seat, so I could actually sit in it! Does anybody have any ideas about a bench seat? If so, let me know!
    IMG_0275.JPG IMG_0276.JPG IMG_0292.JPG IMG_0293.JPG IMG_0295.JPG IMG_0297.JPG IMG_0279.JPG IMG_0280.JPG IMG_0281.JPG IMG_0283.JPG IMG_0284.JPG IMG_0275.JPG
     
  28. Jake_Lancer
    Joined: Aug 26, 2017
    Posts: 33

    Jake_Lancer
    Member

    And thanks so much unclescooby! I really appreciate it!
     
  29. s55mercury66
    Joined: Jul 6, 2009
    Posts: 1,548

    s55mercury66
    Member
    from SW Wyoming

    For a seat, you might look at some C Body (full size) Mopars, especially Chryslers. They had trim along the bottom on most, and were pretty comfy too. Check width and mounting points. Wish I had a specific answer, but Im sure you will several before too long.
     
    chryslerfan55 likes this.
  30. s55mercury66
    Joined: Jul 6, 2009
    Posts: 1,548

    s55mercury66
    Member
    from SW Wyoming

    Will get several answers, that is.
     
    tomschev2 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.