Register now to get rid of these ads!

EZ Triumph motorcycle wiring

Discussion in 'The Hokey Ass Message Board' started by johnnygringo, Jan 25, 2004.

  1. johnnygringo
    Joined: Oct 2, 2003
    Posts: 381

    johnnygringo
    Member
    from Nashville

    I just finished wiring my 51Tbird and after seeing a couple of people building motorcycles on here I figured I'd shoot pics and do a simple wiring tech

    I'm running batteryless with a mag and a tympanium

    here we have the tympanium unit with 4 wires (concealed under seat)

    red is my power...brown is my ground (anywhere on frame)

    2 outside yellow hook up to the 2 coming out of the stator (either one in this instance)
    [​IMG]

    inline fuse for power line
    [​IMG]

    2 coming from stator out of back of primary go to 2 yellow on the tympanium

    notice the wire coming off of the mag which goes to a kill switch on the handlebars
    [​IMG]

     
  2. Cool!
    I'm gonna run a mag and a PODtronics....

    Thanks for postin'!

     
  3. johnnygringo
    Joined: Oct 2, 2003
    Posts: 381

    johnnygringo
    Member
    from Nashville

    and

    here we have the black(power) going to the 2 doublered which is power for the lamp switch

    the one under is the mag kill
    [​IMG]

    green to green and black to black from the switch to the lamp..

    grounded the lamp at the neck stop
    [​IMG]

    FIRE


     
  4. junkboy
    Joined: Dec 30, 2003
    Posts: 55

    junkboy
    Member
    from Las Vegas

    Excellent info with credibility provided by your wrench turnin',busted thumb knuckle in the "inline fuse" photo!

    Mark
     

  5. Rocknrod
    Joined: Jan 2, 2003
    Posts: 648

    Rocknrod
    Member
    from NC, USA

    One comment...

    Use shrink connectors, and if your one of those guys that color codes everything, slide a shrink tube of the right color over the connection and never worry about corrosion again.

    [​IMG]
     
  6. dawggone1
    Joined: Mar 16, 2009
    Posts: 1

    dawggone1
    Member

    Hi to one and all! I have an old 59 Triumph T100R. I bought it with a hard tail bolted on and a motor which needed wiring. I have followed the diagrams in the back of my motor manuals but still have problems -- Is there anyone out there who can help??
    Thank you!
    Dawggone1
     
  7. Check out www.jockeyjournal.com
     
  8. lozza
    Joined: Jun 10, 2011
    Posts: 1

    lozza
    Member

    why cant i see your diagrams, have a few probs myself with wiring on my 65 t-bird bobber...any help?
     
  9. Iceberg460
    Joined: Jun 6, 2007
    Posts: 880

    Iceberg460
    Member

    This thread is a few years old, the OP probably deleted them from his account long ago. You might try asking on www.jockeyjournal.com. It's the sister site of the HAMB for bikes. Lotta Trump guys over there


    Edit: hotroddon types alot faster then me...
     
  10. 49ratfink
    Joined: Feb 8, 2004
    Posts: 18,084

    49ratfink
    Member
    from California

  11. kroozn1
    Joined: Dec 10, 2004
    Posts: 144

    kroozn1
    Member

    Nope.... the plumber's crack he is showing cancelled the "right of the tats" posting deal.
     
  12. Someone PLEASE tell lozza, " Crack is whack "
     
  13. :D Bwwaaa HHAAAAA HAAAAA HAA HA :eek:
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.