Register now to get rid of these ads!

Divco barn find. pulled out into the Texas sun.

Discussion in 'The Antiquated' started by roadkillontheweb, Jan 26, 2009.

  1. roadkillontheweb
    Joined: Dec 28, 2006
    Posts: 1,409

    roadkillontheweb
    Member

    I had a long time Desoto collector buddy of mine send me pictures of the Divco that he found and purchased today down in Texas.
    [​IMG]

    Thats right the guy found a super rare Divco Junior made by Robel in the 1950s for use by dairies in parades and other promotions.

    [​IMG]

    Nothing like a little overkill?
    He could not get it in the truck with the topper on so he loaded it on his trailer and towed it home with a crew cab super duty diesel.

    He will be sending more pictures tomorrow!

    I know there are a lot of Divco fans on here so I thought I would share!

    Here is the original brochure.
    [​IMG]
    It used a 1 3/4hp Briggs 6BS motor
    more info and images here http://www.jrcentral.com/divco.html
     
  2. That is very cool! Good luck with it.
     
  3. 40Standard
    Joined: Jul 30, 2005
    Posts: 5,963

    40Standard
    Member
    from Indy

    pretty cool, nice find
     
  4. MP&C
    Joined: Jan 11, 2008
    Posts: 2,482

    MP&C
    Member

    Heck, he could get about 5 more on that trailer!
     

  5. roadkillontheweb
    Joined: Dec 28, 2006
    Posts: 1,409

    roadkillontheweb
    Member

    Yeah I loved that shot!

    I have only seen one more sell in the last year and it was a couple years before that when the last one changed hands. Have never seen two in the same place except for the brochure!
     
  6. I was expecting a full size Divco...Ha Ha Ha...that thing is hilarious....great find!!!:D
     
  7. Sir Woosh
    Joined: Dec 1, 2008
    Posts: 2,273

    Sir Woosh
    Member

    Thinking about maybe putting a Buick V-6 in the rear? Fun little truck for sure. Glad it survived............
     
  8. I think this Franklin aircooled would be great for it.

    1939 White Motors White Horse.
    The museum that I volunteer for (Crawford Auto-Aviation Museum in Cleveland, Oh) has an original engine for sale. It is a Frankliin Aircooled opposing. The valve covers have White embossed on them. Email me if interested.

    [​IMG]


    [​IMG]
    [​IMG]
    [​IMG]
    <!-- / message --><!-- sig -->__________________
     
  9. roadkillontheweb
    Joined: Dec 28, 2006
    Posts: 1,409

    roadkillontheweb
    Member

    Are you kidding me the thing is screaming "I want a hemi"
    HA HA yeah right!
    Even a 5hp Briggs would be an upgrade!
     
  10. krooser
    Joined: Jul 25, 2004
    Posts: 4,584

    krooser
    Member

    I'll have a quart of chocolate mile and a container of cottage cheese... leave it in the milk chute.
     
  11. tfeverfred
    Joined: Nov 11, 2006
    Posts: 15,791

    tfeverfred
    Member Emeritus

    I'd be droppin' a Harley mill in that thing.
     
  12. now that is too cool!
     
  13. oldspert
    Joined: Sep 10, 2006
    Posts: 1,263

    oldspert
    Member
    from Texas

    Not to hijack but 10 or 15 years ago there was a real Divco in a field between Dublin and De Leon Texas. Haven't been through there since then. Used to go to Dublin to buy real Dr. Pepper.
     
  14. CJ Steak
    Joined: Sep 23, 2008
    Posts: 1,377

    CJ Steak
    Member
    from Texas

    I say gasser it using the original wheelbase. 12" lift in the front.

    "Uncontrollable".
     
  15. roadkillontheweb
    Joined: Dec 28, 2006
    Posts: 1,409

    roadkillontheweb
    Member

    Engine is in the back.
    Driver sits toward the back
    fiberglass body
    and the front jacked up?
    You better have wheelie bars on it!

    It might look pretty good with some monster meats in the back, wheelie bars and a mini parachute!
     
  16. Balls Out Garage
    Joined: Dec 8, 2008
    Posts: 107

    Balls Out Garage
    Member
    from Arkansas

    That's great!!
    I want one!
     
  17. Big Dad
    Joined: Dec 20, 2005
    Posts: 4,775

    Big Dad
    Member

    Terrace Park in Sioux Falls used to have at least one if not more of those they would bring to parades around soo foo, I bet they did not get too far from there either
     
  18. 7"Chop
    Joined: May 8, 2008
    Posts: 493

    7"Chop
    Member
    from Denver

    Very Cool.....Haven't seen one in years
     
  19. JeffreyJames
    Joined: Jun 13, 2007
    Posts: 16,628

    JeffreyJames
    Member
    from SUGAR CITY

    I got dibs on those wheels for my Belly Tank project. Now if I could only find some 8" tall Firestone Indy tires to throw on them.
     
  20. How about some body molds...
     
  21. Throw a Legends Car chassis underneath that super nice body and terrorize the streets....
     
  22. ratster
    Joined: Sep 23, 2001
    Posts: 3,588

    ratster
    Member

  23. belair
    Joined: Jul 10, 2006
    Posts: 9,015

    belair
    Member

    I guess they only hauled pints and half pints.
     
  24. roadkillontheweb
    Joined: Dec 28, 2006
    Posts: 1,409

    roadkillontheweb
    Member

    My fiberglass guy that builds my other Junior car bodies could make the molds easy enough and pump them out, but I do not know if i can afford to buy the original to do that? they are pretty darned rare and when they do sell they are not cheap.

    there is one currently being modified with a high performance frame. here are a couple pictures.
     

    Attached Files:



  25. I gotta agree with Ratster....Zinger It !!

    [​IMG]
     
  26. tjsr19
    Joined: Jul 9, 2008
    Posts: 130

    tjsr19
    Member
    from Lincoln NE

  27. Rooney00
    Joined: Dec 2, 2006
    Posts: 312

    Rooney00
    Member

    That's cool. Just what I need to zip around the neighborhood.
     
  28. Flathead26T
    Joined: Dec 4, 2008
    Posts: 317

    Flathead26T
    Member

    What a cool find!! I have never seen one of those
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.