Register now to get rid of these ads!

Did a seach but no luck. Acid dipping in MN or close state?

Discussion in 'The Hokey Ass Message Board' started by Ricola, Jan 29, 2012.

  1. Ricola
    Joined: Sep 8, 2007
    Posts: 100

    Ricola
    Member
    from MN

    Anyone know of a place in Minnesota or a close state that will acid dip a body?
     
  2. Ricola
    Joined: Sep 8, 2007
    Posts: 100

    Ricola
    Member
    from MN

    Bump for the afternoon crowd. TIA:D
     
  3. I did a search in the MSRA yearbook and didn't find any chemical strippers. I thought there used to be one in Shakopee or Savage?
     
  4. Ricola
    Joined: Sep 8, 2007
    Posts: 100

    Ricola
    Member
    from MN

    Ya, thanks, I thought there was a shop down there someplace but I'm drawning a blank. Anyone else have any ideas?
     

  5. Ricola
    Joined: Sep 8, 2007
    Posts: 100

    Ricola
    Member
    from MN

    Once more try at this. Bump myself up.
     
  6. desotot
    Joined: Jan 29, 2008
    Posts: 1,844

    desotot
    Member

    not acid but I saw this on utube today after talking to somebdy and I'm considering making a tank large enough to do a carbody or frame.
    http://youtu.be/KZCFcxf5IBw
     
  7. belle
    Joined: Jul 30, 2006
    Posts: 150

    belle
    Member

    i think you guys are talking about Metal Strippers in Savage. it was run by guy named Jack , but i believe it has been out of business for years
     
  8. henryj429
    Joined: Jan 18, 2007
    Posts: 1,062

    henryj429
    Member

    The guy you want is Clarence. He does dipping just South of Grand Forks ND. He did all the sheet metal for my Lincoln. The parts come back super clean and the price is not bad.

    PM me if you want his contact info.
     
  9. FrozenMerc
    Joined: Sep 4, 2009
    Posts: 2,739

    FrozenMerc
    Member

    HenryJ beat me too it. Clarence did the hood on my '51 6-7 years ago. Turned out really well, and not badly priced.
     
  10. i have heard guys had problems with "bleed through". did you experiance any problems?
     
  11. FrozenMerc
    Joined: Sep 4, 2009
    Posts: 2,739

    FrozenMerc
    Member

    I just did a hood, so there really wasn't any place for the chemical to get trapped. But for larger parts like doors and bodies that have little pockets here and there, that can be a problem and those parts have to be cleaned and dried very thoroughly before painting can start.
     
  12. paqs1967
    Joined: Oct 16, 2014
    Posts: 2

    paqs1967

    Do you guys have Clarence's information?
    Ive tried pm'ng henry but no response yet
     
  13. paqs1967
    Joined: Oct 16, 2014
    Posts: 2

    paqs1967

    Milwaukee is a little to far right now for me but thanks for the information. Im trying to find out about Grand Forks since its only 2.5 hours away.
     
  14. Quarterscale
    Joined: Feb 16, 2021
    Posts: 1

    Quarterscale

    Anyone know if he still does metal dipping by Grand Forks?
    Share contact info?
     
  15. john worden
    Joined: Nov 14, 2007
    Posts: 1,708

    john worden
    Member
    from iowa

    Redi Strip in Roselle Illinois. West of Evanston.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.