Register now to get rid of these ads!

decided to finally post some pix of my 32 3 window

Discussion in 'The Hokey Ass Message Board' started by hotroddeuce, Oct 8, 2011.

  1. hotroddeuce
    Joined: Feb 13, 2009
    Posts: 265

    hotroddeuce
    Member
    from Mi

    All my pics. were lost there are a few on page 6 I put back on will try to reload when I get time. Thanks

    well I don't post much in the general discussion just a lurker for the most part here but thought I would finally post some pix of my 3 window 95 % original patina and threw some of the rarest parts I could find on it, has been a blast to drive this year finally! This 'ol gal will never get painted as long as I own it. Body has never been messed with.No patch panels,chopped,or filled.
    Chassis was built in early 60's with juice brakes,hurst mount,SB adapter to the 32 tranny, has a 1956 265 motor I added a rare one of a kind 4x2 setup built in the 60's by Bill Wanderer has all gear driven linkage just a trick setup,chicago streamlite rims, lots of old chrome suspension and interior mouldings and dash,SW wing gauges and ect...........
    long story basically on it but heres the result
    I am not fast at getting pix to load up so check back
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    more to come
     
    Last edited: Oct 9, 2017
  2. Very nice, don't change a thing!!!!!

    I like your fuel bowser too!!


    Waz.
     
  3. hotroddeuce
    Joined: Feb 13, 2009
    Posts: 265

    hotroddeuce
    Member
    from Mi

  4. flatheadpete
    Joined: Oct 29, 2003
    Posts: 10,105

    flatheadpete
    Member
    from Burton, MI

    Nice. Now go for a ride!
     

  5. I would love to have that car just like it is, an drive the wheels off of it.
     
  6. jipp
    Joined: Jun 20, 2011
    Posts: 1,112

    jipp
    Member

    i joke about everyone and there mother having a 32 in jest.. with that said.. i really like your car.. to me it just screams cool.. little warn around the edges.. just like me.. drive the piss out of her and enjoy your days.. they go fast. rock on.
    chris.
     
  7. Donnj
    Joined: Dec 5, 2007
    Posts: 304

    Donnj
    Member
    from North NJ

    VERY VERY nice,
     
  8. She's a beaut Russ!
     
  9. hotroddeuce
    Joined: Feb 13, 2009
    Posts: 265

    hotroddeuce
    Member
    from Mi

    interior all chrome mouldings and dash original top insert
    [​IMG]
    [​IMG]
    old moon drop and a old bakelight cigarette dispencer
    [​IMG]
     
  10. I would start smoking again if I had that! Too cool.
     
  11. ooh louvers too, even better!!
     
  12. jipp
    Joined: Jun 20, 2011
    Posts: 1,112

    jipp
    Member

    wow, iv never seen a original roof.. never knew they used what looks like chicken wire.. and the moon drop is way cool.. i do not s moke cigs so id have to load the dispenser up with some green stuff :d

    chris.
     
  13. greaser
    Joined: Apr 30, 2006
    Posts: 857

    greaser
    Member

    I love it...don't change a thing!

    can you share a pic of how that hood top is secured?
     
  14. VOODOO ROD & CUSTOM
    Joined: Dec 27, 2009
    Posts: 1,236

    VOODOO ROD & CUSTOM
    Member

    KILLER deuce. Drive the tires off of 'er.

    That's what Life is all about.

    VR&C.
     
  15. JeffreyJames
    Joined: Jun 13, 2007
    Posts: 16,612

    JeffreyJames
    Member
    from SUGAR CITY

  16. hotroddeuce
    Joined: Feb 13, 2009
    Posts: 265

    hotroddeuce
    Member
    from Mi

    Had the old Heddman headers on yet when I bought the chassis added the pipes which are old tapered driveshafts and had chromed after running for awhile look like they belong now. quarter behind pass door you see is only rust on body besides couple small holes in floor!
    [​IMG]
    [​IMG]
    [​IMG]
     
  17. JeffreyJames
    Joined: Jun 13, 2007
    Posts: 16,612

    JeffreyJames
    Member
    from SUGAR CITY

    Chrome Headmens......rad.
     
  18. a generator instead of an alternator, good to see, very traditional!
     
  19. Harms Way
    Joined: Nov 27, 2005
    Posts: 6,869

    Harms Way
    Member

    Thanks for posting those pictures,.. I really dig your Deuce !
     
  20. 35Chevy.com
    Joined: Nov 27, 2007
    Posts: 542

    35Chevy.com
    Member
    from New Jersey

    I love the car,the only thing I dont like is the fuel lines between the distribution block and the carbs

    Gary

    [​IMG]
    [​IMG]
     
  21. hotroddeuce
    Joined: Feb 13, 2009
    Posts: 265

    hotroddeuce
    Member
    from Mi

    greaser, pretty simple hood latch I did not want straps or any outside fastener showing so just lined the 2 front and back inner hinge part with brass for ease of sliding, welded a washer on back side of second hinge area a spring is used between the washer and 1/4" rod used to make it spring loaded made a bracket off rad shell and drilled a hole in cowl area to secure. could be made a lot better looking than mine but made mine to fit the build.
    [​IMG]
    [​IMG]
    [​IMG]
     
  22. greaser
    Joined: Apr 30, 2006
    Posts: 857

    greaser
    Member

    Thats cool...can I steal your design?? I love the simplicity, and I really dislike those straps.
    Thanks for the pics,
    Dennis
     
  23. flatheadpete
    Joined: Oct 29, 2003
    Posts: 10,105

    flatheadpete
    Member
    from Burton, MI

    Damn what a cool hot rod!
     
  24. VoodooTwin
    Joined: Jul 13, 2011
    Posts: 3,455

    VoodooTwin
    Member
    from Noo Yawk

    Fantastic rod. I'm drooling.
     
  25. bigfive
    Joined: Oct 3, 2003
    Posts: 648

    bigfive
    Member
    from south L.A.

  26. woodypecker
    Joined: Jan 23, 2011
    Posts: 300

    woodypecker
    Member

    It doesn't get any better than this. Take lots of pictures.
     
  27. hiboy32
    Joined: Nov 7, 2001
    Posts: 2,775

    hiboy32
    Member
    from Omaha, NE

    that coupe is just bitchin.
     
  28. BAD PENNY
    Joined: Aug 22, 2011
    Posts: 1,247

    BAD PENNY
    Member
    from mass

    Love them 3-windows...awesome looking ride man !!! Maybe I'll tear the fenders off mine. Gotta re-do the front end 1st though. :cool:
     
  29. NealinCA
    Joined: Dec 12, 2001
    Posts: 2,882

    NealinCA
    Member

    Wow! Bitchin car. I LOVE all of the old plating. Now you need to find some wheels with old plating...

    Neal
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.