Vintage 1960s Schlitz Brewing 15.5 stainless steel keg that has been converted into a gas tank. I sold my project right before this was to be installed so all it needs are the stainless brackets tig welded on and a bung out the back for your fuel line. The Moon spinner cap came with an aluminum bung and since it couldn't be welded to steel, I had a stainless bung machined to fit the cap. We did a site guide for fuel level on the side and the brackets are thick stainless as well and a dimple die was used on the 1.5" in holes. All the hard work is done so don't miss out. This would make a bold statement in the back of any truck or hot rod. I will ship via FedEx.