Register now to get rid of these ads!

Hot Rods Curbspeed Coupe. "Holy Hell" 5/23/2019

Discussion in 'The Hokey Ass Message Board' started by curbspeed, Dec 19, 2010.

  1. Dale, the reveal is an awesome idea and the work looks excellent. I too am no fabricator, I also do everything with a MIG and a grinder so I know the work your doing :D I can't wait to see the reveal with the body sitting on it, I bet it will be slick ;)
     
    heavydumper likes this.
  2. Here is my rear Model T spring and quickie. I still need to have everything done inside the QC. Also my 37 tube axle and PSI hairpins. My rear spreader bar end mod.
     

    Attached Files:

    mgtstumpy and Stogy like this.
  3. Chris, I put pics up on post 24 of the reveal.
     
  4. I bought some wheel disc's from Kevin Lee many years ago when I was building my rpu. I got an aluminum set that I ran for a while on the truck when I had Kelsey's on it. I also had him spin me up a set of steel ones as well. Here is the mock up with the 39 Lincoln brakes and C4 Racing backing plates that will be chrome. I plan to chrome most of the frontend. The wheel disc's will be powdercoated black. This car will be fully painted. No flatblack this time. I learned my lesson. Plans call for Hugger Orange with a wide white stripe down the middle with black pinstipping outlines on the white stripe. Tires are now mounted up on 8.20x 16 rear Firestone dirt track tires and the front are 560x 16. Rims are 40 Ford fronts that are 4 1/2" and rears are 39 Merc that are 6".
     

    Attached Files:

    Last edited: Dec 19, 2010
    ls1yj, mgtstumpy, Stogy and 1 other person like this.
  5. Well, I am getting tired for the night. I will resume this post at a later time with update as I do them. Thanks for looking. Inspiration comes in all forms.
     

    Attached Files:

    mgtstumpy and Stogy like this.
  6. 63Compact
    Joined: Feb 14, 2007
    Posts: 1,177

    63Compact
    Member

    Looking good I like the front horn mod. And the reveal adds to the flow.
     
  7. GaryB
    Joined: Dec 19, 2008
    Posts: 3,530

    GaryB
    Member
    from Reno,nv

    wheels are killer,gonna be a badass coupe
     
  8. WEBSTER
    Joined: May 6, 2006
    Posts: 60

    WEBSTER
    Member Emeritus
    from Tacoma, Wa

    Dale: Looks very swoopy so far, nice to see your ideas coming together just like you and I discussed. Makes me want to drop some pics of the Tall T sedan on the HAMB. Dad
     
  9. I think you should Dad. Your 27 T sedan is looking good and I am sure everyone here would like to see it. I'll call you soon to talk shop and Christmas stuff. Thank all for the compliments. Hope to get more done this weekend.
     
  10. 3wLarry
    Joined: Mar 11, 2005
    Posts: 12,804

    3wLarry
    Member Emeritus
    from Owasso, Ok

    Those seats are passenger seats out of a Beech 18.
     
    Stogy and kidcampbell71 like this.
  11. Rocket88
    Joined: Jul 11, 2001
    Posts: 911

    Rocket88
    Member

    Hay Dale, good to see you're alive and well!
    This will be a great build, I wouldn't expect anything less after the RPU.
    What about a Packard 3 speed with an overdrive for a tranny?
    I've got several sitting under the bench.
     
  12. Nads
    Joined: Mar 5, 2001
    Posts: 11,557

    Nads
    Member
    from Hypocrisy

    Very nice indeed, I love what you did to the frame rails.
     
  13. the-rodster
    Joined: Jul 2, 2003
    Posts: 6,552

    the-rodster
    Member

    LOVE IT !

    Keep us posted.

    Rich
     
  14. thunderbirdesq
    Joined: Feb 15, 2006
    Posts: 6,649

    thunderbirdesq
    Member

    Awesome work man, great ideas too!
     
  15. tinmann
    Joined: Nov 11, 2005
    Posts: 1,584

    tinmann
    Member

    Love the chassis mods. Carry on.
     
  16. I have been waiting a long time for your build thread to start on this car. Did you keep the first house or did you sell it? It looked like the garage work out great for the start of the build. keep the updates coming.
     
  17. Tuff Tin
    Joined: May 23, 2004
    Posts: 921

    Tuff Tin
    Member

    Off to a good start Dale. That's goin to be a coooool ride.
    Mike
     
  18. Loving it so far.
    I think you've got a bit of a wait before Squeak gets back from NZ.
     
  19. 37RAT
    Joined: Dec 7, 2006
    Posts: 144

    37RAT
    Member
    from Wisconsin

    Gee's, made my day just looking at the great ideas and craftsmanship. Wish I was living in AZ again! Have a Merry Christmas!
     
  20. WOW! I'm building a 34, five window also. Love your ideas. I was wondering what to do with my rear rails as my car is gonna be bobbed off too. Never gave a thought to doing what you did with yours. I'll be looking into it. Plan to lean the A-pillars? If you plan to fill the top, I've found an early corvair coupe top skin has the perfect contour.
     

    Attached Files:

    mgtstumpy and Stogy like this.
  21. Evel
    Joined: Jun 25, 2002
    Posts: 9,025

    Evel
    Member
    1. 60s Show Rods

    man this thing is going to rule!! I really dig the PSI hairpins.. where did you get those? if you don't mind me asking :D
     
  22. seatex
    Joined: Oct 24, 2006
    Posts: 2,661

    seatex
    Member

    Off to a damn good start Mr. Seaholm. If that thing turns out as cool as your truck, it's going to one badass ride! Congrat's, it's looking damn good........................ jb
     
  23. JeffreyJames
    Joined: Jun 13, 2007
    Posts: 16,590

    JeffreyJames
    Member
    from SUGAR CITY

    Really nice work. Love the front end and the '32 rail treatment!!!!
     
  24. Jimmy
    Joined: Dec 11, 2002
    Posts: 115

    Jimmy
    Member

    Dale -

    Looking good man. I'm glad to see you are finally able to dig into this. Love the pictures. Keep them coming.
     

  25. x2, Took the words right out of my mouth! haha....how cool are they!?!?

    And how cool are those wheel/disc/backing plate combos!?!?! and how cool is that frame looking with the 32 reveals grafted in ?!?!?!?!??

    On a side note, Dale's pickup was one of the first hotrods that I truly fell in love with after seeing it in a magazine years ago. A while after that, I was pleasantly surprised to see it in one of my Mad Fabricators DVD's.....it was one of the major influences and inspirations for me to build my own hotrod pickup.

    Looks like there's going to be another one of his creations now, to influence and inspire us all again, and most likely bring some more new rodders into the craft.

    Keep up the great work ! You have a great sense of style in your designs, concepts and execution. As an artist, I see the real depth of your work and have a great appreciation for it. Most people don't realize how difficult it is to create unique one off things with so much depth, but at the same time making them so simple in their aesthetic and function.

    I think you would have gotten along great with Henry!

    -Steve
     
  26. HotRodMicky
    Joined: Oct 14, 2001
    Posts: 1,756

    HotRodMicky
    Member

    The PSI hairpins are the tits!!!!!!!!!!!!!!
     
  27. daddy_o's_diner
    Joined: Sep 8, 2007
    Posts: 2,774

    daddy_o's_diner
    ALLIANCE MEMBER

    ^^^^^^^^ Everything about this build "are the tits"!!! ^^^^^^^^^^^^^
     
  28. kisam
    Joined: Feb 28, 2005
    Posts: 1,920

    kisam
    Member

    Subscribed! This is gonna be good!
     
  29. Kelly Burns
    Joined: May 22, 2009
    Posts: 530

    Kelly Burns
    Member


    X2! Man I'm not sure what my favorite part of this build I like the most so far! The whole build is bitchin'! POST MORE!
     
  30. coopsdaddy
    Joined: Mar 7, 2007
    Posts: 884

    coopsdaddy
    Member
    from oklahoma

    Whos black 3 window,any info on it,nice build.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.