Register now to get rid of these ads!

Couple Banger Motors for rebuild

Discussion in 'Parts For Sale' started by TBone69, Sep 24, 2018.

  1. TBone69
    Joined: Aug 21, 2007
    Posts: 793

    TBone69
    Member
    from NJ

    City: Freehold

    State: New Jersey
    Price: $150
    Hey Folks,

    I picked up a rebuilt motor for my project and need some room. I have two motors that need to be rebuilt asking $150 each or take them both for $200 pickup from my location.

    Tired of moving and tripping over them. Take them both and I will cut you a deal.
    Don't have money but have parts I'm open for trades. I'm looking for the following items. lightened flywheel, high comp head, header,down draft intake, finned side covers, clings trans adapter, 39 trans shift tower and rear bearing retainer.

    Engine #1 came in the chassis I rebuilt has parts marked Argentina, STD bore, Early oil pan and front cover ,comes with a head. No flywheel

    upload_2018-9-24_14-49-52.png

    upload_2018-9-24_14-51-2.png

    Engine #2 .060 over pistons but bores closer to .080, head included, no flywheel housing or flywheel. Good for a .100 over TROG racer
    upload_2018-9-24_14-53-25.png

    upload_2018-9-24_14-54-9.png
     
    Last edited: Aug 5, 2019
    HotJob likes this.
  2. TBone69
    Joined: Aug 21, 2007
    Posts: 793

    TBone69
    Member
    from NJ

    Ok folks, $150 each cash and carry. I have a hoist and can help load.


    Sent from my iPad using The H.A.M.B. mobile app
     
  3. TBone69
    Joined: Aug 21, 2007
    Posts: 793

    TBone69
    Member
    from NJ

    Still tripping over them, also open to trades. Need model B or lightened A flywheel, 39 shift tower, rear bearing retainer for closed driveshaft and v8 style clamshell


    Sent from my iPad using The H.A.M.B. mobile app
     
  4. TBone69
    Joined: Aug 21, 2007
    Posts: 793

    TBone69
    Member
    from NJ

    Spring is coming you know you need a project. $150 cash each or parts trade welcome.
     
    Register now to get rid of these ads!

  5. TBone69
    Joined: Aug 21, 2007
    Posts: 793

    TBone69
    Member
    from NJ

    Still have them, need the room more than the money , gave a buddy one of the heads, found a flywheel housing to add to the pile, take em both for $200.
    Have a hoist and can help load them for you.


    Sent from my iPad using The H.A.M.B. mobile app
     
  6. TBone69
    Joined: Aug 21, 2007
    Posts: 793

    TBone69
    Member
    from NJ

    Don’t be afraid to make an offer. Will also take part(s) in trade.

    Need V8 clamshell , rear bearing retainer for 32-39 closed drive shaft trans, shift tower with 3” fork.

    Need them out of the way.


    Sent from my iPhone using The H.A.M.B. mobile app
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.