Register now to get rid of these ads!

Chevrolet 261s Harper 3x2 Hunter Performance Blower

Discussion in 'Parts For Sale' started by Eddie, May 19, 2019.

  1. Eddie
    Joined: Apr 2, 2006
    Posts: 432

    Eddie
    Member
    from Georgia

    City: Marshallville

    State: Georgia
    Price: $4,000.00
    Chevrolet 261s, HARPER, blower, etc.
    #1
    1954 261 short block, casting # 3733950, unusual in that it has no captains bars, block has been modified for full flow oil filter, vatted, honed, new cam bearings, takes the short water pump, bored 1/8 over = 278 cu. in., Jahns pop up pistons, Cliffords 270 cam, crank is 10/10. Very rare Harper 3x2 intake with large logo Stromberg carbs. This is the set-up that has the primary/secondary conversion mods to the carbs and the correct linkage. $4,000.00
    #2
    1955-57 261 short block, casting # 3837012, converted for full flow oil filter, bored .060, Venolia dished pistons, vatted, honed, new cam bearings, polished GMC rods with ARP bolts, crank is 20/20, rotating assembly appears to have been balanced, stock 261 cam and lifters, Intake is very rare Hunter Performance blower intake with a B&M 144 blower, $4,000.00
    I am only interested in selling one of the above, either one. Included with either of the above I have some other items such as Fenton iron headers, oil pan, timing cover, lifter cover, oil pump, some bearings, rings, tubular push rods, rocker arms, misc. and possibly a cylinder head. Not interested in parting out or mixing any of the above combinations.
    #3
    1958 and later 261 short block, this is just a core, will not turnover due to rust in cylinders, it is still assembled with oil pan, timing cover, bell housing, flywheel, etc. $600.00
    Located in central GA, Eddie 478-967-3362
     

    Attached Files:

    flyin-t and Stovebolt like this.
  2. Eddie
    Joined: Apr 2, 2006
    Posts: 432

    Eddie
    Member
    from Georgia

  3. Eddie
    Joined: Apr 2, 2006
    Posts: 432

    Eddie
    Member
    from Georgia

  4. Eddie
    Joined: Apr 2, 2006
    Posts: 432

    Eddie
    Member
    from Georgia

    Register now to get rid of these ads!

  5. Eddie
    Joined: Apr 2, 2006
    Posts: 432

    Eddie
    Member
    from Georgia

  6. Eddie
    Joined: Apr 2, 2006
    Posts: 432

    Eddie
    Member
    from Georgia

  7. Eddie
    Joined: Apr 2, 2006
    Posts: 432

    Eddie
    Member
    from Georgia

  8. Eddie
    Joined: Apr 2, 2006
    Posts: 432

    Eddie
    Member
    from Georgia

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.