These were sanded to 1000 grit then polished. They are not a show finish but will be ok on a driver. There is corrosion on each VC that I can't figure out how it must have happened. I got them with it. one photo shows the spots on the top but would be near a Brake cylinder. These are quite difficult to polish due to the bosses for the VC bolts and the fins running down to the VC rail I'm asking $225 plus shipping. I'll post additional pictures if necessary. Part # is 40-2700 and it doesn't look like they are currently made. Richard >>> Movin/on
The Jalopy Journal
