Register now to get rid of these ads!

Projects Boling brothers

Discussion in 'Traditional Hot Rods' started by REDMAN48, Jan 16, 2020.

  1. REDMAN48
    Joined: Feb 7, 2010
    Posts: 39

    REDMAN48
    Member

    First I’d like to give props to the boys at Boling brothers early iron .. Derrick and his crew don’t get enough gratitude for their work .. from there communication to shipping my new frame .. these guys are excellent ! I’ll be using them again in the future [​IMG][​IMG]


    Sent from my iPhone using H.A.M.B.
     
  2. Roothawg
    Joined: Mar 14, 2001
    Posts: 19,347

    Roothawg
    Member

    Thanks for the review. Glad to hear it was a good experience.
     
  3. manyolcars
    Joined: Mar 30, 2001
    Posts: 8,226

    manyolcars

    are those the same guys who sell Bendix brake kits without the self adjusting parts?
     
  4. Mr48chev
    Joined: Dec 28, 2007
    Posts: 26,510

    Mr48chev
    ALLIANCE MEMBER

    The only hold down kits I saw were the ones for Lincoln brakes that don't have self adjusters but I couldn't tell if you were asking a question or complaining.

    Great looking frame Redman48 I'd expect to see some photos of it as a roller pretty soon. That may be the frame they showed on FB a few days ago as one they had just finished up.
     
    Blues4U and Roothawg like this.
    Register now to get rid of these ads!

  5. Doug G
    Joined: Jul 30, 2015
    Posts: 24

    Doug G

    I used them for a custom mandrel bent frame to my specs for my 1933 Chevy build and was pleased with price and communication !! Great company and would highly recommend also !
     
    REDMAN48 likes this.
  6. Tall t 26
    Joined: Oct 6, 2017
    Posts: 228

    Tall t 26
    ALLIANCE MEMBER

    Great looking frame. Awesome foundation!!
     
    REDMAN48 likes this.
  7. krylon32
    Joined: Jan 29, 2006
    Posts: 6,172

    krylon32
    Alliance Vendor
    from Nebraska

    Great guys to deal with. I've been a dealer for several years and they do their best to ship promptly and have always been very forth rite when I needed tech advise. Great looking frame, they are craftsman with that mandrel bender.
     
  8. D and his crew are top notch! More than pleased........
     

    Attached Files:

    gimpyshotrods, REDMAN48 and bct like this.
  9. Blue One
    Joined: Feb 6, 2010
    Posts: 10,333

    Blue One
    ALLIANCE MEMBER
    from Alberta

    There you go again being Mr. Negative.
    Do you have a valid concern or do you just like to bitch ?

    Boling is great, Derek does nice work and makes great products.
    I have a pair of their MT products Lincoln brakes on the front of my RPU, very nice stuff.
     
    gimpyshotrods likes this.
  10. Another happy customer.
     
    REDMAN48 likes this.
  11. I don't think anyone makes automatic adjusters for early Bendix brakes.
     
    Blue One likes this.
  12. Hot Rods Ta Hell
    Joined: Apr 20, 2008
    Posts: 4,028

    Hot Rods Ta Hell
    Member

    They do awesome work and they're super cool too. Thumbs up all the way!
     
    Blue One likes this.
  13. I just upgraded the front brakes on my '40 with a pair of their Bendix backing plates... good stuff!
     
    Blue One likes this.
  14. Great to deal with and great parts.
     
    Blue One likes this.
  15. I purchased their Lincoln brakes and hubs, excellent fit and quality, worth the money :cool:
     
    Blue One likes this.
  16. 38bill
    Joined: Dec 20, 2019
    Posts: 34

    38bill
    Member
    from Minnesota

    I also just used their Lincoln style brakes on the rear of my '38. Nice stuff!
     
  17. good to hear.........
     
  18. shortypu
    Joined: Dec 22, 2010
    Posts: 171

    shortypu
    Member

    IMG_1948.JPG IMG_1803.JPG Boling Bros just happen to be up the road from me and so it was a easy choice.I had seen several chassis that he built and loved the quality and their brake kit was a lot easier than hunting all the Lincoln parts.My current 31 and my next model a will be their chassis.
     
    Tim likes this.
  19. Used Up Junk
    Joined: Nov 12, 2008
    Posts: 669

    Used Up Junk
    ALLIANCE MEMBER
    from Merced, CA

    1AD5D599-CF2E-4931-B4ED-26932E6D855B.jpeg ADB833F5-EBDE-4D33-BD81-0ECFCDE30D12.png Couple of my friend’s cars. The Model A is on one of Boling Brothers complete rolling chassis and is running Boling Brothers Lincoln brakes. The ‘32 is running the Lincoln brakes on the rear only (no front brakes to save weight) and stops like you threw out and anchor. I can’t say enough good things about Boling Brothers products and services!
     
    HemiDeuce and Tim like this.
  20. mopacltd
    Joined: Nov 11, 2008
    Posts: 826

    mopacltd
    Member

    Never heard of them.
     
  21. gimpyshotrods
    Joined: May 20, 2009
    Posts: 16,923

    gimpyshotrods
    ALLIANCE MEMBER

    You should fix that.
     
    HemiDeuce, Tim, Blue One and 2 others like this.
  22. mopacltd
    Joined: Nov 11, 2008
    Posts: 826

    mopacltd
    Member

    I'll do some research. And maybe use them on my next hot rod build.
     
    REDMAN48 and Used Up Junk like this.
  23. clem
    Joined: Dec 20, 2006
    Posts: 2,752

    clem
    Member

    Anyone who crates up a chassis like that obviously has high standards and takes pride in their work.
    Chassis’s look like something anyone would be proud to own.
    Nice to hear so many positive comments about them.
     
    Blue One likes this.
  24. gimpyshotrods
    Joined: May 20, 2009
    Posts: 16,923

    gimpyshotrods
    ALLIANCE MEMBER

    Many of my customers run a chassis from them.

    All are more than pleased.
     
    REDMAN48, Tim, Blue One and 1 other person like this.
  25. Blue One
    Joined: Feb 6, 2010
    Posts: 10,333

    Blue One
    ALLIANCE MEMBER
    from Alberta

    That’s not true, just by reading this thread you have heard of them.

    And now you know they make nice stuff.
     
  26. Tim
    Joined: Mar 2, 2001
    Posts: 10,772

    Tim
    Member
    from Raytown Mo

    The quality of work and their price point makes me really really consider them for the next car. They mandrel bend the rails and can do custom one off stuff for whatever project you are working on.

    http://www.bolingbrothers.com/

    I also follow what they are up to on Instagram
    @bolingbrothers
     
    kidcampbell71 likes this.
  27. no55mad
    Joined: Dec 15, 2006
    Posts: 1,839

    no55mad
    ALLIANCE MEMBER
    from nipomo, ca

    Have talked to and bought from them at the Jan Turlock swap; good people!
     
    REDMAN48 likes this.
  28. DDDenny
    Joined: Feb 6, 2015
    Posts: 13,200

    DDDenny
    Member
    from oregon

    My pal in Bakersfield stopped at their shop years ago to inquire about a build he was considering, he ultimately bought a finished deuce 3W from someone else but said he was impressed with them, especially the way they treated him, said they seemed like genuine car guys, said he would consider them for a future build.
     
    REDMAN48 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.