Register now to get rid of these ads!

Technical Banjo ring gear and pinion query

Discussion in 'Traditional Hot Rods' started by XenonJohn, Jul 30, 2022.

  1. XenonJohn
    Joined: Sep 11, 2021
    Posts: 3

    XenonJohn

    Hi, I am new to the forum and building a traditional flat head belly tank lakester from scratch. I am not planning to go especially fast, it's more about the fun of it. I have a '37 banjo rear end and I will be connecting the UJ from the gearbox (6 spline female) directly to it in the traditional way via an ultra-short torque tube i.e. with no propshaft. My 37 Banjo rear end has 10 splines and also is the wrong ratio anyway. Speedway sell a 3.25 ratio 6 spline crown wheel and pinion kit that they say will fit any banjo from '35 to '48 which would sort out both problems. I just need to double check if people here think it would fit a previously-10-spline banjo in terms of the other internals ?
     

    Attached Files:

  2. cvstl
    Joined: Apr 15, 2009
    Posts: 1,490

    cvstl
    Member
    from StL MO
    1. H.A.M.B. Chapel

    Yes, The 3.25 R&P from speedway will fit your '37 banjo.
     
  3. XenonJohn
    Joined: Sep 11, 2021
    Posts: 3

    XenonJohn

    Thanks for confirming. I have one ordered.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.