Register now to get rid of these ads!

Attention Dodge 241 and 270 owners looking for Offenhauser 2x2 intakes!

Discussion in 'The Hokey Ass Message Board' started by dmarv, Feb 12, 2009.

  1. dmarv
    Joined: Oct 10, 2005
    Posts: 968

    dmarv
    Alliance Vendor
    from Exeter, CA

    I've been working with Offenhauser to do a production run of the 2x2 intake manifolds for the Dodge 241 and 270 V8 engines. It's been about 20+ years since the last time they did a run of the manifold. In order to do it I would need an order of 25 manifolds. If you are interested in getting one of these hard to find maniflolds call me at 559-592-2707 or send me a PM. I would need billing info to secure a spot on the list, but YOU WILL NOT BE CHARGED UNTIL I GET THE MANIFOLDS. The pricing of the manifold will be around the $340.00 mark plus shipping. Tay Offenhauser has not confirmed the final price yet, but I feel safe saying the cost should be close to that. Currently, the pattern only allows the use of the 4 bolt small base Rochester 2GC carburetors. I am working to have Offenhauser add to the pattern so the manifold can be drilled for the 3 bolt Stromberg or Holley carburetors. Let me know what carburetors you will be using. I can't confirm a final delivery date yet, but the faster the order is placed the sooner I can get the manifolds. I would assume the maifold will be available in 12 plus weeks. The current patterns need to have some work done to make them production ready and the work on the patterns will not start until I place the order.

    Dan Marvin, Owner
    Exeter Auto Supply
     
  2. dmarv
    Joined: Oct 10, 2005
    Posts: 968

    dmarv
    Alliance Vendor
    from Exeter, CA

    Thanks for all of the replies! I'm still taking orders.

    Dan
     
  3. 73RR
    Joined: Jan 29, 2007
    Posts: 6,228

    73RR
    Member

    Good work Dan !!
    Can you give us an update on the number of folks on your list?

    .
     
  4. dmarv
    Joined: Oct 10, 2005
    Posts: 968

    dmarv
    Alliance Vendor
    from Exeter, CA

    I just talked with Offenhauser and the prototype of the single quad manifold is back from the foundary and they are doing machine work on it. The next step is to revise the pattern for production, finish the tooling and gear up for production. The 2x2 is getting pattern work to accept the 3 bolt carburetors then they have to protype it.

    Dan Marvin, Owner
    Exeter Auto Supply
     
    Register now to get rid of these ads!

  5. J Man
    Joined: Dec 11, 2003
    Posts: 4,111

    J Man
    Member

    Just for other peoples sake, will this fit the 260/270 motors with Poly heads?
     
  6. strombergs97
    Joined: May 22, 2006
    Posts: 1,888

    strombergs97
    Member
    from California

    Here is my version of a 2x2 for a Red Ram..241 or 270 Hemi
    Duane.
     

    Attached Files:

  7. dmarv
    Joined: Oct 10, 2005
    Posts: 968

    dmarv
    Alliance Vendor
    from Exeter, CA

    I just got off the phone with Offenhauser and they are going into full production on the 2x2 and 1x4 manifolds for the 241 and 270. So I'm accepting orders now. Manifolds should be ready in 6 to 8 weeks!!!! The 2x2 will be $340.00 plus shipping and the 1x4 will be $360.00 plus shipping. Alliance member discount of 5% will apply to all alliance members!

    Dan Marvin, Owner
    Exeter Auto Supply
     
  8. Revhead
    Joined: Mar 19, 2001
    Posts: 3,027

    Revhead
    Member
    from Dallas, TX

    from what I read intakes fit hemi OR poly engines
     
  9. dmarv
    Joined: Oct 10, 2005
    Posts: 968

    dmarv
    Alliance Vendor
    from Exeter, CA

    MANIFOLDS ARE IN!!!!! I've got the 2257 1x4 and the 1186 2x2 manifolds. The 2x2 manifolds can be ordered for the 3 bolt Stromberg/Holley carbs or for the 4 bolt small base Rochester 2GC carbs.

    Dan Marvin, Owner
    Exeter Auto Supply
     
  10. 73RR
    Joined: Jan 29, 2007
    Posts: 6,228

    73RR
    Member

    Great News, When do we get some pics ??

    .
     
  11. dmarv
    Joined: Oct 10, 2005
    Posts: 968

    dmarv
    Alliance Vendor
    from Exeter, CA

    I haven't even opened the boxes yet! I'll get my camara shoot some pics.

     
  12. brigrat
    Joined: Nov 9, 2007
    Posts: 4,795

    brigrat
    ALLIANCE MEMBER
    from Wa.St.

    I am interested, also need pic's.................
     
  13. dmarv
    Joined: Oct 10, 2005
    Posts: 968

    dmarv
    Alliance Vendor
    from Exeter, CA

    Here is a pic of the 1186 3 bolt manifold.
     

    Attached Files:

  14. dmarv
    Joined: Oct 10, 2005
    Posts: 968

    dmarv
    Alliance Vendor
    from Exeter, CA

    Here is a pic of the 2257 1x4 manifold. The manifold comes complete with Holley/AFB carb adapter.
     

    Attached Files:

    • 2257.jpg
      2257.jpg
      File size:
      139.4 KB
      Views:
      220
  15. 73RR
    Joined: Jan 29, 2007
    Posts: 6,228

    73RR
    Member

    Now thats way cool. Have you asked them about DeSoto yet???

    Besides gold bullion, what payment methods do you accept?

    .
     
  16. dmarv
    Joined: Oct 10, 2005
    Posts: 968

    dmarv
    Alliance Vendor
    from Exeter, CA

    Gold would be best...but i do take all major credit cards and money orders. No US savings bonds.

    Dan Marvin, Owner
    Exeter Auto Supply
    559-592-2707

     
  17. Dmarv...Even though I don't have a Baby Hemi...mines a 331...I know how rare original 4bbl and 2x2 manifolds are/were so a big THANK YOU for doing all the leg work on this one!!!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.