Technical Anyone have a good pic of a 35 36 ford running fentons / duals through the stock crossmembers?

Looking for a good under chassis pic of dual exhaust on a 35 -36 with a flathead routed in the stock location, through the crossmember above the axle ect.

Thanks!

 

In the front area it's trial and error or slice and dice.
Rearward it gets easier.
You want a pro with a pipe bender and/or a selection of bends to weld together.

 

well....let's bump it....bump it good....

 

I have these, not the best pictures but they were on file. I hope they help. You can pretty much see where things are going.
Mike.

 

Thats a good start thanks! bump