Register now to get rid of these ads!

- Anyone collect old tools? Show them here...

Discussion in 'The Antiquated' started by HRK-hotrods, Dec 1, 2008.

  1. blown49
    Joined: Jul 25, 2004
    Posts: 2,212

    blown49
    Member Emeritus

    I have a collection of old Ford valve tools. Shown on my website on pages 4 & 5.

    Jim
     
  2. i know this is a old ad, but im looking for the same compressor if any one has one...condition dont matter..
     
  3. Scotty68
    Joined: Jul 4, 2018
    Posts: 3

    Scotty68

    That lathe is beautiful!
     
    alwaysamopar likes this.
  4. Scotty68
    Joined: Jul 4, 2018
    Posts: 3

    Scotty68

  5. Scotty68
    Joined: Jul 4, 2018
    Posts: 3

    Scotty68

    Can anyone give me any info on my little bench vise? Other than that it's adorable 20180704_072627_HDR[1].jpg . : ) 20180704_072638_HDR[1].jpg
     
  6. grumpy32
    Joined: Apr 1, 2010
    Posts: 245

    grumpy32
    Member
    from Australia

    I picked up this old clamp a while ago, I couldn't let it go, just sitting in a box of junk at a salvage yard.
    Old clamp.jpg
     
    VANDENPLAS and Okie Pete like this.
  7. TagMan
    Joined: Dec 12, 2002
    Posts: 6,237

    TagMan
    ALLIANCE MEMBER

    Brainard Mill Ca. 1905-1915:
    [​IMG]mill2 by TagMan, on Flickr

    1947 South Bend 13" x 60" lathe:
    [​IMG]SBL3 by TagMan, on Flickr
     
  8. crashfarmer
    Joined: Apr 4, 2006
    Posts: 1,274

    crashfarmer
    Member
    from Iowa

    I now have 2 of this type of air compressor, this one is a Montgomery Ward Diaphragm Air Compressor 1/3 hp and I have another that the compressor unit looks the same on but it has wheels and a handle so a person can roll it around. I don't know how old they are but they look pretty ancient to me.



    IMG_20180831_110523.jpg IMG_20180831_110537.jpg IMG_20180831_110558.jpg IMG_20180831_112431.jpg
     
    Okie Pete likes this.
  9. 1lucky1
    Joined: Apr 19, 2009
    Posts: 1,253

    1lucky1
    Member
    from Morgan NJ

  10. Anyone that hangs out on the HAMB that also is a member over @ Garage Journal forums is aware of the Craftsman Block grinder thread will likely recognize my prized vintage bench grinder thought to be from the late 50's, in original condition, in the original box :)
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    Okie Pete, loner1, Lepus and 4 others like this.
  11. FANTM58
    Joined: Apr 24, 2009
    Posts: 406

    FANTM58
    Member

    B752D99F-0C5A-427A-866C-F383B6E8C5E3.jpeg 99C16B3D-8D30-4931-808A-E88AD476E25A.jpeg 66160F8C-8B82-4864-A200-ACE36B7BF37F.jpeg 3F6A2A8B-D649-4468-8E4F-43F75F79EDF2.jpeg 0CA1FA50-15E4-4D1F-8C4D-9317D7E60466.jpeg FF4390B0-6B68-456E-B178-0C492BA147C3.jpeg 410D3A62-3999-447E-91FC-22D1C6B2F174.jpeg D8CB0D75-98A6-46B6-8F36-7BFDDF6C0456.jpeg 2FEB26C0-841F-4181-A639-1DB1E7E02EFD.jpeg This is a pretty complete valve seat tool. I have no use for it, it’s for sale
    If anyone is interested !
     
    das858, Okie Pete and loner1 like this.
  12. Most were my grandfathers. Some older than others but I love them. Still use some if them on occasion. IMG_20180101_161551.jpg
     
    Lepus, A 2 B, 2bubbas and 3 others like this.
  13. Ralph Moore
    Joined: May 1, 2007
    Posts: 651

    Ralph Moore
    Member

  14. Zbailey411
    Joined: May 29, 2019
    Posts: 1

    Zbailey411

    Got a nice pipe wrench when I was on a business trip in St Petersburg. Saw it at some flea market, as I recall, it was called Udelnaya. First it seemed to me that some sellers set random prices, but then I googled and read in this article https://petersburg.expert/blog/udelnaya-flea-market/ that some of them really don't know the price of what they're selling. Funny. So if someone's in Russia, keep it in mind.
     
  15. losthubcap
    Joined: Jul 23, 2010
    Posts: 187

    losthubcap
    Member
    from Upstate NY

    Here's a few....
     

    Attached Files:

  16. Fordors
    Joined: Sep 22, 2016
    Posts: 4,637

    Fordors
    Member

    17958C04-09EE-4F8F-946C-43838EC66FFD.jpeg 65B01A03-9A88-4DEF-A1F0-2DA93ACECFA7.jpeg My father in law poured the castings and machined all the parts for this vise in 1942 as a Junior at Chicago’s Tilden Technical HS. Back when things like shop classes still mattered in this country my brother in law’s class built a single seat airplane at Tilden in the ‘50’s.
     
  17. TraditionalToolworks
    Joined: Jan 6, 2019
    Posts: 302

    TraditionalToolworks
    Member
    from NorCal

    I have so many old tools I wouldn't know where to start. From chisels, hand planes, saws, drills, timberframing, log building, axes and even a couple vintage chainsaws. I have a treadle lathe/scroll saw, this is just woodworking related...LOL that's not even starting on metalworking tools.

    There's a lot of slippery slopes with old tools...I frickin' love 'em...:rolleyes:

    I would say some of the saws I own are some of the oldest tools...early 1800s to mid 1800s...They aren't worth as much as you would think, but they are still really cool tools to acquire. I will add one here...ok, a bonus because they're thumbnails...:D

    The other thing I like to "acquire" are vintage snap-on, mac and other tools to work on cars...don't have any pics however...

    davenport14-full-profile.jpg lineup-handles.jpg
     
    Last edited: Jun 6, 2019
  18. krbstr
    Joined: Jul 18, 2016
    Posts: 37

    krbstr
    Member

    [​IMG][​IMG]
    An old axe head I found in my back yard when cleaning an old junk pile. After cleaning it up some I discovered it was an old Winchester, I’m gonna get a nice handle for it and use it to split firewood.


    Sent from my iPhone using H.A.M.B.
     
  19. goldmountain
    Joined: Jun 12, 2016
    Posts: 3,928

    goldmountain

    The question remains- if you change the head and the handle, is it still grandpa's axe?

    Sent from my SM-T350 using The H.A.M.B. mobile app
     
    1morecarIpromise! likes this.
  20. A friend has this.....
    [​IMG]

    [​IMG]

    It is a hub borer, used to bore a wood spoke wheel on horse drawn, Conestoga wagons. The wood wheels were made without a taper because axles of various manufacturers used different tapers, so this is adjustable...

    They talk about the ‘good ol days’... I think these are them!


    Rusty, Greasy, Noisy
     
    Okie Pete and 1morecarIpromise! like this.
  21. jmkporsche
    Joined: Jan 6, 2019
    Posts: 34

    jmkporsche

    IMG_0634.JPG

    Harter Engineering Works engine boring bar from 1924. I have been unable to find any other information on this or the company out of Seattle that made it.


    Sent from my iPhone using H.A.M.B.
     
  22. bowie
    Joined: Jul 27, 2011
    Posts: 2,968

    bowie
    ALLIANCE MEMBER

  23. A 2 B
    Joined: Dec 2, 2015
    Posts: 344

    A 2 B
    Member
    from SW Ontario

    SouthBend 10K lathe with taper attachment, milling fixture and a 32 piece set of 6K collets is the only vintage powered tool I use. One day I want to display all the vintage hand tools I have squirreled DSC04502.JPG away over the years. They don't get used but I kept them.
     
  24. Okie Pete and 1morecarIpromise! like this.
  25. sliceddeuce
    Joined: Aug 15, 2017
    Posts: 2,982

    sliceddeuce
    Member

    ,That....Is a good looking machine!! I also have a 13X60
     
    continentaljohn likes this.
  26. Inherited these planes from my dad. Not sure what I am going to do with them... 1026181350.jpg 1026181350b.jpg
     
  27. My wife says I'm an old tool......or fool....or something....
    Either way I'm not showing you.....

    Awesome thread.
     
    VANDENPLAS likes this.
  28. neatoldclassics
    Joined: Mar 1, 2008
    Posts: 187

    neatoldclassics
    Member
    from Montana

  29. neatoldclassics
    Joined: Mar 1, 2008
    Posts: 187

    neatoldclassics
    Member
    from Montana

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.