Register now to get rid of these ads!

Event Coverage Any1 see anything HambWorthy @SEMA

Discussion in 'The Hokey Ass Message Board' started by Donuts & Peelouts, Nov 1, 2017.

  1. DDDenny
    Joined: Feb 6, 2015
    Posts: 16,412

    DDDenny
    Member
    from oregon

    Yes, hard to tell by the photos but they appear to be pin drive K.O.'s, though the holes look larger than those on wheels of old.
    BTW
    Halibrand made a few wheels similar to these with the ribs, have only seen one car with them.
     
    chryslerfan55 and els like this.
  2. Are the threads left hand tight for knock offs?
     
    chryslerfan55 and els like this.
  3. Only on the left side, I hope!

    Phil
     
    chryslerfan55 and els like this.
  4. squirrel
    Joined: Sep 23, 2004
    Posts: 51,901

    squirrel
    Member

    I thought it was on the right side? been a couple years since I had a set
     
    els likes this.
  5. mopacltd
    Joined: Nov 11, 2008
    Posts: 967

    mopacltd
    Member

    A picture of my Model A is on the Center Force Clutch Display. And Yes, it has a Center Force Clutch in it!
     
    chryslerfan55 and els like this.
  6. tfeverfred
    Joined: Nov 11, 2006
    Posts: 15,792

    tfeverfred
    Member Emeritus

    Nice car. Isn't SEMA where shops and manufacturers go to promote their wares? Well, so far, that Deuce has got 3 pages on the HAMB, of people talking about those wheels. Just as intended. People are falling for it hook, line and sinker. Genius.
     
  7. Dino 64
    Joined: Jul 13, 2012
    Posts: 2,276

    Dino 64
    Member
    from Virginia

    The blue one ? It’s killer, sorry to ask again but was it chopped ?


    Sent from my iPhone using The H.A.M.B. mobile app
     
    lothiandon1940 likes this.
  8. Gavin Tittle
    Joined: Aug 15, 2017
    Posts: 248

    Gavin Tittle
    Member

    DSC00284.JPG
    Shot of the Shoebox I took at the good-guys meet in august, and yeah, it was indeed featured in Hot Rod, personally I quite like the car. but then again I like most any "hot rod" that doesn't look like it came out of a cookie cutter
     
    zuke, els, lothiandon1940 and 4 others like this.
  9. That shoebox '51 looks like it's getting more traditional!
    Looks like '56 Continental cast valve covers and anscient Hilborn
    fuel injection!
    LOVE that car!
     
    els likes this.
  10. ironrodder
    Joined: Jan 29, 2007
    Posts: 189

    ironrodder
    Member

    Yeah those wheels are so bad Foose should just let me hide the car for him!
     
    els likes this.
  11. A Boner
    Joined: Dec 25, 2004
    Posts: 6,686

    A Boner
    Member

    I guess traditional hot rods are a small segment of the hot rod hobby.....how many traditional looking hot rods and customs are actually on display at SEMA? Not too many posted on this thread......were there anymore there?
     
    els likes this.
  12. mopacltd
    Joined: Nov 11, 2008
    Posts: 967

    mopacltd
    Member

    Dino, it is the green Model A with a 426 hemi in it.
     
    els and lothiandon1940 like this.
  13. Dino 64
    Joined: Jul 13, 2012
    Posts: 2,276

    Dino 64
    Member
    from Virginia

    Oh, sorry, but thanks for the reply


    Sent from my iPhone using H.A.M.B.
     
    els and lothiandon1940 like this.
  14. Here's some HAMB-Friendly (& semi-HAMB-friendly) Hot Rods & Customs at 2017 SEMA:

    28-29 Model A Sedan.jpg

    36 Roadster.jpg

    40 Coupe.jpg

    Bill Bowen’s ’37 Ford pickup.jpg

    Deuce 3wd Coupe.jpg

    Deuce Fordor.jpg

    Deuce Roadster.jpg

    Foose Deuce 5wd Coupe.jpg

    Foose P-32 Roadster.jpg

    George Poteet '32 Tudor - Johnson's Hot Rod Shop.jpg

    Goolsby RPU.jpg

    Rob Ida's Tucker.jpg

    T Roadster.jpg

    Vette.jpg

    Mulholland Speedster - Hollywood Hot Rods.jpg

    Halloween Night.jpg
     
    Last edited: Nov 4, 2017
  15. Here's a '60s Show Car themed Model A Sedan ... by ????????????:

    '60s Show Car Model A Sedan (1).jpg

    '60s Show Car Model A Sedan (2).jpg
     
    Last edited: Nov 3, 2017
  16. Debbie Walls' 1940 Ford Convertible ... by Goolsby Customs:

    Debbie Walls – ’40 Ford Convertible – Goolsby Customs (1).jpg

    Debbie Walls – ’40 Ford Convertible – Goolsby Customs (2).jpg

    Debbie Walls – ’40 Ford Convertible – Goolsby Customs (3).jpg

    Debbie Walls – ’40 Ford Convertible – Goolsby Customs (4).jpg

    Debbie Walls – ’40 Ford Convertible – Goolsby Customs (5).jpg
     
    Last edited: Nov 3, 2017
  17. Mark and Dennis Mariani's Model A Sedan ... by Rad Rides by Troy:

    Mark and Dennis Mariani – Model A Sedan – Rad Rides by Troy (1).jpg

    Mark and Dennis Mariani – Model A Sedan - Rad Rides by Troy (3).jpg

    Mark and Dennis Mariani – Model A Sedan -Rad Rides by Troy (2).jpg
     
    Last edited: Nov 3, 2017
  18. Tad Leach's 1958 Lincoln Continental Mark III Convertible ... by Kindig-It Design:

    Tad Leach – ’58 Lincoln Continental Mark III Convertible – Kindig-It Design (1).jpg

    Tad Leach – ’58 Lincoln Continental Mark III Convertible – Kindig-It Design (2).jpg

    Tad Leach – ’58 Lincoln Continental Mark III Convertible – Kindig-It Design (3).jpg

    Tad Leach – ’58 Lincoln Continental Mark III Convertible – Kindig-It Design (4).jpg
     
    Last edited: Nov 3, 2017
  19. You’re right. They are reverse threaded on the left side. And if you look close at the picture you’ll see see the length of wire that secures it in place.


    Sent from my iPhone using The H.A.M.B. mobile app
     
    els likes this.
  20. Here's some HAMB-Friendly (& semi-HAMB-friendly) Trucks at 2017 SEMA:

    United Pacific ’32 Ford Pickup.jpg

    Sinister Pickup.jpg

    Ted & Colleen Hubbard’s Model A coupe,.jpg

    Forty.jpg

    fenderless pickup.jpg

    Chevy.jpg

    F100 .jpg
     
    Last edited: Nov 3, 2017
  21. Great pics Hemi32....thanks :cool:
     
    els, Hyfire, Dino 64 and 1 other person like this.
  22. The "Street-able Mooneyham & Sharp Tribute" 1934 5wd Coupe ... by Gas Monkey Garage (& guest builder Brian @Bass) is displayed in Discovery's "Motor Village":

    GMG - Bass '34 5wd @ SEMA '17 (by Ed Tillrock).jpg
    image by Ed (@ewt2) Tillrock

    GMG - Bass '34 5wd @ SEMA '17 (by Brian Bass).jpg
    image by Brian @Bass

    BANGSHIFT - SEMA-2017-cars-and-trucks-outside202.jpg
    BANGSHIFT - SEMA-2017-cars-and-trucks-outside204.jpg
    BANGSHIFT - SEMA-2017-cars-and-trucks-outside210.jpg
    BANGSHIFT - SEMA-2017-cars-and-trucks-outside206.jpg
    BANGSHIFT - SEMA-2017-cars-and-trucks-outside208.jpg
    images from Bangshift

    NOTE: For more info & pics, see the Brian Bass on Fast & Loud thread.
     
    Last edited: Nov 3, 2017
  23. A Boner
    Joined: Dec 25, 2004
    Posts: 6,686

    A Boner
    Member

    Great.....way more traditional looking cars than when I was there.
     
    els likes this.
  24. Here's pics of the Top 3 in the "Battle of the Builders" competition:

    The SEMA Show Ignited party - Top 3 Battle ogf the Builders (1).jpg

    The SEMA Show Ignited party - Top 3 Battle ogf the Builders (2).jpg

    3rd place - Hollywood Hot Rods (Mulholland Speedster):

    Top 3 Battle ogf the Builders - Hollywood Hot Rods - Mulholland Speedster.jpg

    2nd place - Johnson's Hot Rod Shop (Poteet's Deuce Tudor):

    Top 3 Battle ogf the Builders - Johnson's Hot Rod Shop - Poteet's Deuce Tudor.jpg

    1st place - Rad Rides by Troy (Mariani's 1929 Model A Sedan):

    Top 3 Battle ogf the Builders - Rad Rides by Troy - Mariani's Model A Sedan.jpg
     
    Last edited: Nov 3, 2017
  25. i.rant
    Joined: Nov 23, 2009
    Posts: 3,773

    i.rant
    ALLIANCE MEMBER
    1. 1940 Ford

    HEMI 32, great “uncluttered “ photos, thanks for sharing.
     
    els, chryslerfan55, HEMI32 and 3 others like this.
  26. Looks like more than a few builders went with the "clunky" wheels in one fashion or another.
    Appreciate all the pictures.
     
    els likes this.
  27. Probably the most HAMB-friendly (i.e., traditional) Hot Rod at SEMA was in the HVA display ...

    The famous "Bob McGee / Dick @scritchfield Roadster" (currently owned by @Deuce Bruce Meyer):

    McGee - Scritchfield '32 Roadster at SEMA '17 (by Brian Bass).jpg
    image by Brian @Bass

     
    Last edited: Nov 4, 2017
  28. Pewsplace
    Joined: Feb 10, 2007
    Posts: 2,800

    Pewsplace
    Member

    Great photos. Thanks for sharing.
     
    els likes this.
  29. Cyclone Kevin
    Joined: Apr 15, 2002
    Posts: 4,161

    Cyclone Kevin
    Alliance Vendor

    BAABA5B0-E294-42E7-9511-F9691B61DB51.png
    Well it most definitely has a Hot Rod Rear End.
    A CYCLONE that is ;).
    Great choice Chip!!!!!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.