Register now to get rid of these ads!

Hot Rods Ansen slots uni-lug washers

Discussion in 'The Hokey Ass Message Board' started by zinky, May 10, 2022.

  1. zinky
    Joined: Oct 11, 2020
    Posts: 10


    I got these in a parts deal and they are in nice shape from what I can see. Not sure they go with my vibe though. They are 14x7 slots. The center caps just say ANSEN, not ansen sprint or anything else. But the strange part is that
    A) they are Uni lug and
    B) they are a round washer hole. I have looked on eBay and only find ovular washers.
    Does anybody know where to find these type washers. ??
    I believe its a 4.5/4.75 from what I can tell
    I am about ready to toss them out of sheer frustration
    I also just placed them in the classified section on HAMB. I think they could be cool for somebodies look, just not mine
  2. Need a pic
    I’ve seen the larger shouldered mag lug nut holes get confused as unilug
  3. A little info from a mopar page
    a pic of 2 different style lug nuts for mags.
    My Ansen wheels used the bottom pic

  4. Budget36
    Joined: Nov 29, 2014
    Posts: 11,566


    I didn’t know any better with the slotted mags, used a regular washer and a mag wheel bolt. Never came loose, etc. I’d bet the fancy washers were for a visual thing.
    Packrat likes this.
    Joined: Nov 7, 2008
    Posts: 122


    I have ordered offset washers from Summit.
  6. zinky
    Joined: Oct 11, 2020
    Posts: 10


    Hmmm! I will have to try to get up some pictures. Upon second look I was somewhat wrong. The recessed hole for the washer is round as I said earlier, but down in there is an ovular opening which makes me think they are unilug. So I guess a round washer that had a hole off center could just be spun around to match either setting. I held them up to my 5 on 4.5 Dodge and the inner end of the opening matched up pretty nice, so I figured the other setting was GM 4.75
  7. zinky
    Joined: Oct 11, 2020
    Posts: 10


    OK this is looking more hopeful. I literally almost put them out to the curb yesterday with a free sign on them. Maybe if I can find the washers I will keep them around
  8. jimmy six
    Joined: Mar 21, 2006
    Posts: 13,119

    jimmy six

    If there’s not Ansen on the back side casting they are something else. Not positive but I don’t remember unilugs on them…
  9. AZbent
    Joined: Nov 26, 2011
    Posts: 279


    This is a 13 inch on my falcon. With the offset lugs, these are a universal type wheel. I doubt that they are a true ansen wheel.

    Attached Files:

  10. Those are Appliance wheels and caps
    bowie likes this.

Share This Page

Register now to get rid of these ads!


Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.