Register now to get rid of these ads!

Anglia spindle/spindlemount specs

Discussion in 'The Hokey Ass Message Board' started by Larry T, Mar 12, 2006.

  1. Larry T
    Joined: Nov 24, 2004
    Posts: 7,660

    Larry T

    Every once in a while someone wants to know Anglia spindle specs, what spindle a spindlemount fits, or if you can modify an Anglia spindlemount to fit a Ford spindle (I don't think so), so heres some info on it.

    American 5 spoke Anglia spindlemount.
    Seal---------------National 471787
    Inner bearing-------Timken 07098
    Outer bearing------- Timken 03062
    Outside edge of inner bearing race to outside edge of outer bearing race- 2 7/8"
    Inner face of wheel to outer face of wheel-3 3/8"

    Measurements of diagram below:
    A-- .230
    B-- .840
    G-- .983
    H-- .625

    The measurements were with a digital caliper not a set of mics, so take it for what it's worth. You can double check the measurements from the bearing and seal numbers.

    Attached Files:

    Last edited: Jan 16, 2016
  2. Jim Marlett
    Joined: Aug 12, 2003
    Posts: 865

    Jim Marlett

  3. Firecat7
    Joined: Dec 11, 2011
    Posts: 254


  4. Firecat7
    Joined: Dec 11, 2011
    Posts: 254


    thanx for the help guys. got the numbers, search out the parts tomorrow.

  5. quickchangeV8
    Joined: Dec 7, 2010
    Posts: 384


  6. Good to know. Thank you.
  7. gas pumper
    Joined: Aug 13, 2007
    Posts: 2,953

    gas pumper

    To the rescue again! Thank You for this information.
  8. @raven needs to check this out.
    Thanks Larry. This is damned good info.

Share This Page

Register now to get rid of these ads!


Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.