Register now to get rid of these ads!

Featured Projects Almost Funny

Discussion in 'The Hokey Ass Message Board' started by squirrel, Nov 27, 2017.

  1. squirrel
    Joined: Sep 23, 2004
    Posts: 37,415

    squirrel
    ALLIANCE MEMBER

    I got a new car. The plan is to make the next step in the evolution towards the Funny Car. My inspiration is cars like the Pete Dorsey Crazy Cuda

    crazy.jpg

    and the Sox & Martin car.

    sox.jpg

    My starting point:

    before01.jpg

    I decided to get a relatively clean car to start this project, just to save time on bodywork.

    Since it's a Plymouth, it really needs a 426 Hemi. Since I want to get it done, I need a use for it, and a deadline, so I intend to get it to Drag Week next September. Time is short!
     
  2. noboD
    Joined: Jan 29, 2004
    Posts: 6,193

    noboD
    Member

    But Squirrel, you do know none of your Chevy parts are going to fit.
     
  3. 64 DODGE 440
    Joined: Sep 2, 2006
    Posts: 3,741

    64 DODGE 440
    ALLIANCE MEMBER
    from so cal

    loudbang and els like this.
    Register now to get rid of these ads!

  4. silent rick
    Joined: Nov 7, 2002
    Posts: 3,457

    silent rick
    Member

    is that what is known as a brand X?
     
    Bowtie Coupe and els like this.
  5. shivasdad
    Joined: May 27, 2007
    Posts: 399

    shivasdad
    ALLIANCE MEMBER
    from Texas

    I'm in for a sub. Love to see your stuff coming together.
     
    AmishMike and els like this.
  6. Dick Stevens
    Joined: Aug 7, 2012
    Posts: 1,849

    Dick Stevens
    Member

    Oh boy, this is going to be fun! :D:D:D:D
     
    redlineracer42 and els like this.
  7. Gavin Tittle
    Joined: Aug 15, 2017
    Posts: 166

    Gavin Tittle
    Member

    YES! Love the "pre-funny" classes, so glad there is a build of one going on.
    and its a MoPar too, I'm subscribed.
     
    els and Texas Webb like this.
  8. Is it going to have the engine in the rear?:D
     
    Dino 64, Clay Belt and els like this.
  9. squirrel
    Joined: Sep 23, 2004
    Posts: 37,415

    squirrel
    ALLIANCE MEMBER

    No, I was not inspired by Hemi Under Glass.

    The plan is a 500ish inch engine, relatively mild as far as cam and compression. With a blower, and some type of gizmo to mix air and fuel (TBD). The race cars back then usually had stack injection, no blower, and they tended to tip the nitro can as needed to put on a show. But I'm building a street car, that needs to run somewhere in the 8s. So it will need to be as light as possible, and be something I can get in and drive as far as I want to.
     
  10. Flathead Dave
    Joined: Mar 21, 2014
    Posts: 1,470

    Flathead Dave
    ALLIANCE MEMBER
    from So. Cal.

    I can't wait to see it. I'm tuned in.
     
    els likes this.
  11. Cool! What trans?
     
    Dino 64 and els like this.
  12. flatford39
    Joined: Dec 3, 2006
    Posts: 1,755

    flatford39
    Member

    That thing even has the original hub caps on it. Pretty clean car.
     
    els likes this.
  13. LAROKE
    Joined: Sep 5, 2007
    Posts: 1,043

    LAROKE
    Member

    From the photo, that rear glass appears to be in great shape.
     
    els likes this.
  14. Blues4U
    Joined: Oct 1, 2015
    Posts: 1,751

    Blues4U
    Member
    from So Cal

    I'm in! This should be a great ride, looking forward to the updates.
     
    Dino 64 and els like this.
  15. redo32
    Joined: Jul 16, 2008
    Posts: 1,019

    redo32
    Member

    I always had a soft spot for the first series Barracuda. Probably because I used to pass a little ol lady in a pale yellow Formula S. That little 273 had the best exhaust note.
     
    els likes this.
  16. KoolKat-57
    Joined: Feb 22, 2010
    Posts: 2,416

    KoolKat-57
    Member
    from Dublin, OH

    Wow Wee, this looks like a very cool fish in the making!
    Gotta love those rust free Arizona cars, here in Ohio we get free rust cars!
    Good luck with the build, we'll be watching.
    KK
     
    triman62, els and Stogy like this.
  17. RMR&C
    Joined: Dec 26, 2009
    Posts: 2,241

    RMR&C
    Member
    from NW Montana

    Awesome, can't wait to see it come together!
     
    els likes this.
  18. If you finish a month a head of time, Mopar Nats are in August. :)
     
  19. oldolds
    Joined: Oct 18, 2010
    Posts: 2,143

    oldolds
    Member

    As others have said, This is gonna be good! On a side note... Do you have a license for sub 9.00 et's? Some of the requirements will surprise you if you you have not read the rule book. It can get expensive real quick.
     
    els and Stogy like this.
  20. squirrel
    Joined: Sep 23, 2004
    Posts: 37,415

    squirrel
    ALLIANCE MEMBER

    thanks!

    The transmission....not sure yet. There are several options. I expect I'll want to use a torque converter, because I haven't any experience at all with clutches, and there appears to be a rather steep learning curve when you get over 500 hp, and want to drive it on the street, and go quick on the drag strip. So that means either a Lenco, PowerGlide, TH400, or 727. I know the 400 pretty well, and they don't have the drum explosion problem of the 727. I don't know yet if I need two or three speeds (or if I need overdrive, which I doubt). The World Products aluminum Hemi block has both Chevy and Torqueflite bolt patterns, if I use that block. but they also make lots of different adapters and bellhousings these days, so that's not really a big concern.
     
  21. squirrel
    Joined: Sep 23, 2004
    Posts: 37,415

    squirrel
    ALLIANCE MEMBER

    I don't have a competition license, and I'm aware of most of the rules. One big change is at 8.50 where you need a funny car cage, which I want to avoid.

    I can get a license before the car is finished, if I pay to go to school. Which sounds to me like a reasonable thing to do.
     
  22. Thor1
    Joined: Jun 6, 2005
    Posts: 863

    Thor1
    ALLIANCE MEMBER

    Jim,

    Wow, a street driven car that will go into the 8's and be driven across the country on a patented "squirrel road trip". I am subscribed and looking forward to seeing how this adventure unfolds. This build will be similar in many ways to a "squirrel road trip"!

    Have fun Jim!

    Steve
     
  23. Malcolm
    Joined: Feb 9, 2006
    Posts: 7,154

    Malcolm
    Member
    from Nebraska

    Awesome, Jim! I'm looking forward to following along with this.
     
    els likes this.
  24. oldolds
    Joined: Oct 18, 2010
    Posts: 2,143

    oldolds
    Member

    A few friends have cars that are in the 8's. I think they have to get ekg's along with a physical to get the license now. If I understand what they told me a couple years ago, The physical is different from what is required for a CDL, so they had to get a separate one for NHRA as well as ekg. All paid out of pocket. Insurance company would not pay for it. I could be wrong. I am sure others will chime in.
     
  25. squirrel
    Joined: Sep 23, 2004
    Posts: 37,415

    squirrel
    ALLIANCE MEMBER

    I was talking with a couple old racers this weekend....yeah, this type of racing mostly involves taking $100 bills and lighting them on fire.
     
    enloe, oldsjoe, Clay Belt and 18 others like this.
  26. 56sedandelivery
    Joined: Nov 21, 2006
    Posts: 4,437

    56sedandelivery
    Member

    What will happen to the Chevy II? Up for sale to build the war chest up? Just don't break the rear glass on the Barracuda; you'd have to buy another complete car to get a replacement I've heard. At least you did't try to take your wife's Dart! I am Butch/56sedandelivery.
     
  27. Put a BBC in it! They're in everything else and if you never pop the hood who will never know. It will probably go faster cheaper too.
     
  28. DDDenny
    Joined: Feb 6, 2015
    Posts: 7,120

    DDDenny
    Member
    from oregon

    Jim, that's a peach.
    If this car is as neat as the Nova, this should be a blast.

    Redo
    In my best Maxwell Smart voice "I came this close" to having a 64 Baracuda for my first car. In 1969, at 15, I'd had my nose in all the car rags lusting after 64, 65 Savoys, Furys, Sport Furys, etc. a number of my h.s. mates had them so I was jazzed about Mopars.
    My mom took me to look for a car and right up front was a white 64 Baracuda (273/auto).
    Went for a test drive and it had a noisy rearend so test drove (and bought) the black 348/3 speed 61 Impala next to it and that ended my infatuation with owning a Mopar.


     
  29. mopacltd
    Joined: Nov 11, 2008
    Posts: 392

    mopacltd
    Member

    Great talking with you at the International Auto Show this weekend. My Hemi Model A almost caught a vires parked next the Cheby's and a Ford. But my car is kinda confused on what it wants to be.
     
    Clay Belt, els and squirrel like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.